General Fi

Is this possible? I would be interested if so.

I have seen a couple old threads about these 22 inch subs but I have not read anything of them in the last few months. Did they ever come out? Also what were their specs, price, etc...?

when are they coming out? i was going to get 4 18" but when i heard these 22's were coming out i figured i would wait... is there going to be a new motor on it or any drastic changes or should i just get the 18"s? pretty much just wondering if there coming out in the next couple of months

LIke the title says i need a amp for my btl and while i would love the preorder a Saz-2500d i just dont have that kind of money but i have about $350 and was wondering what i should do ????? :puzzled:

whats the difference between the fi btl and the fi bl ?

Hello i took my btl 18 out of the box today just to change wire size and when i looked at the spider it had like4 small cracks on it what could cause this??? i use to own a bl 15 and the spider got cracked too. i was wonderig if this is a manufacture fault cause the spider is so stiff?? i added some goop it glue to each crack just to keep if from getting all messed up..

Album of Fi BTL 15 Pictures I have a Btl 15 fully loaded with Cooling, HiXm coil, Inner Heat Sink, daily Driver, dual 2s. I was recently looking at my sub and found that the spiders were starting to crack. I thought maybe the motor was bending the frame and causing the coils to scrape. I had a friend post on a forum about frames bending and they all said the frame would crack and break before it would bend. I do not know if I got a faulty frame or what but my frame is bent which made the sub not be centered and caused the coils to scrape on the motor and put extra force on that side of the spider . I have pictures and measurement to show what I am talking about. Also on…

What size box do yall recommend

Hey guys i have a 2001 dodge neon and i was wonderin which would get louder, 1 18 BTL or 2 12 BTLs....or even a 15BTL...and if so what amps should i put on em, how many watts

this is my first time going with fi.my question is im goung with 2 fibtl 18`s i have a cevy silveradp quad cab.my box is going to take up my whole back seat does anybody know what max rms i can put to them.its not compeition but i still want them to work at there full potential any amp or amps u guys can reccomend........thanks

i have a fi btl dvc 2 ohm and was wondering how can i wire it to get the lowest ohm load thnks

hello i have a fully loaded btl motor...i need basket and everything to make this complete...if i shipped top you how much would it cost to make complete.....and how much just for the parts...or would you do a trade in towards a lower end less powered sub...just curious...marck

I have a 2 cubic foot box ported at 32 hz, and a hifonics amp that puts out "1200" rms at 1 ohm. Would a BTL run ok with this setup???

I'm a couple days away from buying two SS XXX 15s. I intend to run two Autotek MM4000.1Ds to them in about 8 cubes at 30 Hz. This is in the back of an 04 TrailBlazer subs up port back. While I am certain this will get loud I am finding myself leaning towards the fully loaded BTL 15s. The Autoteks would be too much power for the BTLs but let's say you had the option. The SS XXX setup with the Autoteks which, at 3 ohms, would give each sub around 3000 watts, or two Fi BTL 15s in the same box in the same vehicle as the SS with about 2500 watts to each? I am getting a good deal on the SS so even they are still going to cost more I am not unwilling to pay for it. Which would y…

ok we hooked my friends BTL to a saz-3000 today and as we where playing different songs we heard it popping. is that because its too many watts for the sub?or is it just how its tuned. allso its at 1ohm what do you people recomend to leave it at 1ohm or up to 2ohms???

I have emailed fi many times about getting a recone and they would email me once or twice but never give me a price. I have a 15" BTL fully loaded with the 1 slug motor and need a recone quote for a 18" basket and recone shipped to 73110.

Hi there i have an 18" BTL the older style one with the tripple magnet and while taking out the whole system so i could design a new box i pulled out the sub from the old box and spotted that the spider on the btl was ripped in about 2-3 places 1 of them being a noticeable rip and the other 2 look like there about to rip and also i found out that where the spider is glued to the cone the spider was coming unglued in a few places. I wanted to know does this mean that i need a re-cone or is it salvageable, pictures are below, the pictures below are of the major rip one Thanks

just wondering if anyone knows an aproximate shipping time to canada at all i understand it takes time to build and thier backed up at the moment too just want to estimate my wait time to plan things to do and i know the wait will be worth it

Hi, I am driving a Jeep Grand Cherokee (1993) and my current set up is a Memphis MOJO on an Alpine PDX 1.1000. As far as wiring, i have 4 AWG power wire for the amp (Knukonceptz Kolossus Fleks Kable), and I have put in a 0 AWG wire (also Knu) for the battery to chassis ground. I was going to complete the big 3, but was told by a mechanic that the other two were not necessary for my setup (stock 90 amp alt currently.) I receive decent voltage drops (almost massive at idle if i'm not careful.) About 3 weeks a go, my voltage dropped to the point that my amp went into clipping (or at least this is what I think caused it. Gain is set right on or a little below half). L…

im curious as to how the back end functions at Fi. do orders come in, get qued, and built one at a time or batch jobs? are orders saved up until there is sufficient quantity to make it efficient for construction to begin or is it just on the fly?

Any chance I can get Fi Car Audio as a line in my shop? any info on this will be greatly appreciated, you can post or pm me Thanks

Before buying from a small new company, I want to people to chime in with their experiences with them. From buying to warranty claims to technical issues you might have had with them. Please give details of the good, bad and ugly.

the title explains everything

I was recently informed that Fi will have a support email with a dedicated responder. [email protected]

Trying to buy some recones but, it keeps redirecting me to a blank page. Anybody else have this problem ? Hit "checkout " key and takes me here ...