General Fi

hey i was looking at getting an fi subwoofer just wanted to know if theyre is going to be any upcoming promotions for the holidays that anyone knows of thanks!

Im looking to get an Fi Q 15in at 2 ohm dual hooked up to a hifonics brutus 1200 watt i have a couple of questions... would it sound better ported or sealed. and does Bp power add more power?

hey guys ...have a quick question ...i just bought 2-12" FI Q DVC 1 ohm used...just got them in the mail today so i pulled out my meter to check the ohms on each coil ..1 sub i get .8 to .9 on one coil and 1.0 to 1.2 on the other coil.... sub 2... 1.0 to 1.2 on one coil and 1.1 to 1.4 on the other coil is this ok ? i know on the FI site 1 ohm dvc should be .7 ohms and 2 ohms dvc should be 1.4 ohms and yes i am using a good meter ( fluke 116) just dont know if the ohms go up a little once they are broken in which is my case since they are used .....just want to make sure i am hooking them up to a sundown saz1500d at 1 ohm and dont want to blow anything …

its been reviewed and its been a "god" in sq.its the w6 ...no doubt its a fantastic woofer..but how does the Q compare..this would be a nice reference .

Hello all, anyway after months of being disappointed with my expectations of my audio shops work. I am having my box redone, and unfortunately I have to spend more money to fix there damn mistakes. Oh well, anyway I am wondering if there really is a big difference between two 10 fi q's or two 12 fi q's. I currently have a fiberglass enclosure for the tops and I can have them modified to fit 12's but that would cost more money. If two 10's can closely copy the 12's in everything I'd rather stick with the 10's. My current set up in my Supra features two Kicker CVR 10's and a Gravity 2 channel amp that says it pushes out 1400 watts more likely than not probably about …

The Foam surround ripped apart on my fi Q 10" After 6 months of play. I have no idea what would cause this. Fi customer service is lacking to say the least. Does anyone know how to get in touch with someone at fi? I have been e-mailing the [email protected]

Hey Scott I knew there was still some kinks to work out with the framing???? on the woofer ......but I see them on the site set to sell.... I picked up one of the 12" SX hybrids a while back...and never installed it....I realize that I need a 10" and something that I can probably seal and still sound really good.. car in question... gotta love that matte black paint job....the birds sure do. woofer in question...I love this cone reminds me of the W7 cone......and lets face it its sexy as hell

first off i love to bump. but i also love the truck i got right now. i wanna keep the rear bench seat also. so my plan is to do a build that will be loud but also compact. now i measured it out and ive got around 1.2 cubic feet under the bench seat to work with i would like to do 2 10s. i dont plan on burping at all. now i planned on goin with making sealed enclosures for them but would i be better off with a ported. if i have to im sure i could maybe get 1.5 cube out of it if i really make the box fit perfectly. also would i maybe be better off with going with a different series. i would still be stuck with only 10s tho cause thats all the bigger the gap is gonna allow.…

I am considering a Q12 for an IB install in an 84 El Camino. I have a Phoenix Gold Xenon 600.1 that should make 850rms. if I have the sub modded for IB use is this a good choice. I listen to just about everything from techno to metal and some bass music

I am thinking about running 3 Q 12's in a boat. I had already made boxes that are .95 cubes a piece when I ordered some Brahmas. Due to Adires current situation the brahmas will not be coming. Anyway, can anyone tell me how the Q works in a sealed box, and if possible how it compares to the brahma. I have not ordered an amp yet, but was hoping to give each sub about 800 watts. Is this enough or do I need to find a larger amp? Right now the only other line I am looking at is TC. I am between the TC-2000, TC-3000, or Q. I also thought about a SSD, but it seems the Q puts out more spl as well as better sq, which would be perfect as I am looking for a LSQ install. Th…

I have a 2004 BMW 330Ci. Here is a list of what I have: Eclipse AVN-5435 Audiocontrol Overdrive, ESP-2, DQX, and DDC US Amps USA 200x - tweeters (50x2) US Amps USA-400x - midrange (100x2) US Amps USA-2000x - sub (2000x1) OZ Audio CS-180 (old school superman logo) 1 Fi Audio Q12 D2 in a 2.0 cu ft box tuned to 33 hz with 24 in of port area (small, I know). First, the car Previous setup to the previous setup (3 ID IDQ10 V.2s sealed powered by a US Amps USA-1000) Previous setup (05 RE XXX12) Trunk Another interior shot Controls in center console

Well after a mere 5 months my Q12 has given up the ghost with no warning. I was pretty impressed with the Q. I was running it with a Memphis Belle mch1300 in 2.2cf @ 32hz Fisher box. The Q also had the BP option as well. I will also add that this is the first sub I have ever blown if that gives you an idea of how conservitave I generally run things.

Wondering if anyone has matched a passive radiator with the Q 12 before? If so what radiator, if not is there any recommendations? Looking at making a home theater sub

I think I finally decided on the Q. Now I just don't know which options are going to work best. I don't have an amp yet, but plan on getting something that is around 1200-1500. What I'm looking for in a sub, is one that will work best in a small sealed enclosure (around 1 cube), has great transient response, and can drop low. It is an old, old sub now, but my favorite by far has been the MASS 2012, and I just can't find a sub that is equal or better. The fs of the Q kind of makes me nervous, as the MASS was around 25 and the q is 34. My front stage consist of a DLS up6i set, being powered by an amp that is 150x2. The front stage sounds quite good for my taste. I've setup…

I order a Q 12 from fi on the 17th of April. It been over 33 business day since I ordered my sub. Then FedEx sent me a shipment email saying that it would arrive on the 24th of April. I knew that was not correct. So I wait until June 12 before I emailed agin. No reply till last Thursday. When I got the email the said it said sub was being shipped and that FedEx would be sending me a tracking number? So I email them Friday asking about my tracking number and still no reply. I just want to know where my sub is.

Anyone running 8 gauge speaker wire into the terminals?

Im going to get a Fi Q 12 dual 2 and was curious what options I should go for. I am powering it with a Sundown SAX-1200D parallel. Thinking about doing the big 3 upgrade I already have the 1/0 hyperflex but I have a new 2010 A4. Runing 8g from the battery to the trunk in the amp. Again, What options should I go for with a ported enclosure about 2.3 cubes.

I know the SQ of the Fi Q 12" is good. but will it still bump good in a 2^3 foot box off of 1200 rms???

Is there any advantage or disadvantage in going with the Bp version. Plus should I get the 2 ohm version? Right now Ive got 600w into 2 ohms.. The Pioneer Mono doesnt do 1 ohm... I will upgrade someday... And lastly with the SQ of this sub be much better than the Pioneer sub I have? Below are the specs and I know specs dont mean that much... Thanks for your responses in advance!!! Mike Pioneer TS-W1208D4 Size 12" Woofer Cone Material Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone Woofer Cone Design Cone Reinforcement Arcs Surround Wide Roll, Three-Layer Fiber Woven Radial Voice Coil 4-Layer, Long Voice Coil Voice Coil Wire Copper Voice Coil Bobbin Phenol Resin Coat…

I'm too lazy to type another thread so I'm just going to post links Pics and vids here: http://www.caraudio.com/forum/showthread.php?t=293273

hi. anyone ever used a wall for 2 Fi Q 15's? i have a box thats tuned to 9 cu ft. right now but i wanted to see if i could use a wall for these. i was thinking like 12-15 cu ft. too much??? any suggestions? thanks.

So im upgrading my system again, I first had 1 Q 15 sealed with the High qts option, then I wanted to go ported, so I bought another Q 15 with high QTS to be the exact same as the first sub. Im now going to rebuild my wall and run 4 FI Q 15s (later ill probably SP4s) the next 2 subs I get will have all the same options as the other 2 but should they still have High QTS since im running ported? I know high QTS is not optimum for vented enclosures, but should they all be the same when it comes to QTS?

I plan on doing 5.75 3^ft after displacement sealed enclosure on 1000wrms. Any and all critisism welcome aswell as opinions. Please be brutally honest, I'm a big boy no harm no foul. This will be going into a ford escort hatch

As title states, I orded my 18, and now I'm thinking of how I'm making a box, it's going to sit inside of a 2000 Four Runner, last box I made was for 2 12's at 5cubes, 33hz Can I make a box at 6.7 cubes and tune it to 28 hertz? or will that sound bad.. I like low tuning by the way Thanks guys! Also, do you think a Audioque 2200D is perfect for this sub?

So today I just receivied my first 18!!!!! An 18 fi q!!!! When I saw the size of my box I just gaped At it. It was just huge! The size of the sub is even crazyer. The thing is enormous! I was realy not expecting thing to be so heavy. So far the first impressions have been great so I caint wait to build a box for it. Fi is amazing!!!!!!!!!!!!!!