General Fi

I don't want to have to post all this over again so I'll link ya'll to it. Tell me what you think. http://www.*****.com/board/ind...?showtopic=8016

I am having a Fi BL 12 Loaded shipped and will be using my current Rockford Fosgate 1000w rms amp to power it unless reccommended to use something more powerful. should i up grade to something more powerful? if so what? sundown is out of stok on the saz1500d until april. any thing else? If so, everything else electrical is stock in the car. Do i need to make any electrical or wiring upgrades at this time?

Any update on the Blue Print Audio home theater line of subs?

Let me know which is better, and if i can push them to max power with 3 2000 watt amps (1 for each), please let me know if that will work....THANKS!!

im just wondering if scott is still doing the whole send in a stamped envelope and he will send a couple stickers? thanks guys i appreciate it

hey guys..i will just get straight to the point..... Is 4.4 cubic for a fi bl 15'' too much??? It has the P_Chamfer opt only... dual 1 ohm will be wired to 2 ohms on a MTX TA81001... oh and its tuned to 31.16 using re box calculator

Hey guys i have a 2001 dodge neon and i was wonderin which would get louder, 1 18 BTL or 2 12 BTLs....or even a 15BTL...and if so what amps should i put on em, how many watts

I heard that the price on the site is +shipping. So how much did you guys pay for shipping (12" if the size matters)? Georgia in case that matters. Thanks. blake

What would you prefer? 2 10" BL's ported with about 2.5 cu ft volume after displacement (2k watts total) or 1 15" BTL ported with 3 cu ft after displacement (about 2.5k watts). I wanna get loud, but not for competition and still save some room in my car. If 3 cu ft is to small for a 15, I could always put a 12" BTL back there. I just wanna get the most bang for my buck and still have ample room for storage. Dodge Charger by the way...I gave up on SQ, realized its not really my thing.

4 x BTL 15's with 10kw - Videos - Talk Audio Forums Enjoy

Everyone else is doing one so I figured I would too. I am only going to show pictures up to right before the final install, since I am re-doing that Wednesday. The HU, love this thing been a very nice HU to me. Some pictures of the equipment 2 12" BLs, flatwind and cooling 2 Sundown 1500.1s All the equipment + my old subs 75 Feet of 0 Gauge (not including the 25 feet already in the car) First off, building the false floor. Had to raise it up on 2x4s to make clearence for the batteries. Running the 0 gauge, I actually managed to fit 3 runs of it down one side of the car Everything just about wired up Carpeting the Floor More pics coming Wednesday Nig…

I got my sub last tuesday and it looks great. Today I finished my box and wiring up the sub when I found one set of the terminals was broken. It looks like someone tighten it to much and pulled the screw out. I included a pic of the problem. If I can get a new one I can put it on and solder it myself. Thanx for the help.

I need grilles for my 2 10" SSD's. Not the metra universal mesh ones please. I dont like the look of thoes. Does anyone know of any that I can use? I am not sure that grilles from Kicker, Fosgate, Polk, etc will clear the excursion of the Fi's. Please help if you can. I need them for protection more so than looks, with the exception of that horrible mesh, anything will do. Thanks in advance

Got some of the recone glue for a 12" Q Got the 60oz (have some other subs to do too) My question is, what is the mix ratio? I'd assume that its 2:1 (Black:clear) Just don't want to mess it up. Any help would be great. Thanks in advance.

i bought a 10 q back in mid feb and i have had no problems until now i have had two lead wires break in the past two weeks i soldered them both back on but one has broke again and now there is not enough lead wire to reach the terminal

my brother just placed an order for a 15" Q with dual 1 ohm coils with out telling me. and he doesent know much about car audio. hes running a soundstream 1500D, do yall think the sub and amp will be alright running at .5ohm? or should i try and change the order to a dual 2 ohm coil?

So I just recieved my BL 15" fully loaded last week i got it pretty much broken in and today i noticed my box had slid around in my trunk almost sliding its way into my back seat and since my back seats were folded down the rubber rib of the sub actually got wedged against the ceiling of my trunk which is about 3-4 inches shorter towards the opening then in the middle of my trunk where it normally should sit. I tried my best to carefully get it out but i failed and ripped about a 2-2.5 inch slit in the rubber rib( bassically it looks like someone took a razor blade to it). I listened to it and theres no difference in sound or SQ that me or anyone could notice. Im wonderi…

Just got my woofer in and wondering whats the right size wire to use. 8awg?

My name is Jason from Il. Just wondering whats going on with my 15" BL. Scott not sure if you remember talking to me, and saying that one was going out that day which was Fri. the 18th and possibly the second one. Worst come to worst it would go out monday the 21st. I have only received one. I also have never received any emails from UPS. Just wondering whats going on as I have sent a few emails and no response. Not sure if your not getting them or what

Amp just came in, cant wait for my sub im getting restless...

I went to a car audio place and they basically tried to discredit fi and say theres no way a sub of less than 600 can handle 5000 watts how does a fi Q w/ bp compare to a Re Mx and a MTX Thunder Square 750s

Nick, what's your email address there, the two I have bounce back.

I hope that am in the right section for this post, if not, am sorry admin. I have been trying to post a drawing up so that i could get some feedback on it with no luck. Can someone steer me in the right direction. Thanks in advance for the help.

I sent an email to Fi Audio about a week or go and i got no reply. I sent in an order for a FI Q12 on June 23rd. Then i sent an email on the 24th requesting some information on the enclosure. Please PM me or reply to my email. Thanks -Mike