General Fi

Can fi recone an atomic apx?

i need fi's phone number. ups says it delivered its package at my front door at 12:40pm. well, it wasnt or somebody has stolen the package from my step. i think it was delivered to the wrong house, or the hoodlums that live next door saw i wasnt home and stole the package. b/c its kinda hard to steal a package carrying 2 12" subs in broad daylight. i ordered 2 fi q 12's. im out $500+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! fi's site only has the sale's e-mail and last time i e-mailed it they said they were recieving mass e-mails so they might respond. i need fi to contact ups so they can start an investigation. i hope fi is willing to do this. this is very disheartening,…

I was wondering what the cost of a recone would be on 2 RE SE15s? Zip 52405. Thanks.

I have a Memphis 16-mc2000d mojo amp. I also have a FI BTL loaded This sub is dual 2 ohm. I wired it in series so the amp sees 4 ohms. I have it in a 7.5 cube box tuned to 40HZ However when I really get this thing kicking it sounds like it cannot handle the power. Any suggestions, I know this sub can take all that this amp can give it???

Ok, I need some help. I've decided to get an 18" Fi BTL for my expedition. I have no idea what to power it with.....Sundown? Kicker? what?.... I'm kinda indecisive on the amp because I know its recommended for around 1500rms , but we all know they can handle more. And I want more Safely, do you think I should go with some 3000 watt amp - such as the Saz-300d ? Also, with a 150amp alternator, can I get by with two yellow top batteries? Or should I get a 240amp alternator? And if I do get the upgraded alternator, will I still need a battery in the rear?

I just ordered a sub and im pumped at how much it will pump. I ordered a 10"Q, Dual 1Ohm, Burgandy Dustcap to match my car and i cant wait to install it. Before i buy amp and deck what would you guys prefer to power this thing im looking to run 800W-1000W. Ill post pics arrival and install. Thanks a lot guys. Steve.

Is it possible for a lanzar 2000 to power 2 15" FI BL FL and still have 1100 watts to each? thanks

I got a BL 15" and i only got the cooling option. can it handle 1500W from a sundown saz1500d? is that a good amp? or would you recommend something else with less/more power?

Box is for a Fi BTL 18" it's going to be in a S-10 blazer I've noticed alot of the people on here use blazers and may have a design already. What I'm wanting is a box with the sub pointing up with the port facing the hatch. I can get deminsions if needed. Thanks, Dover.

I just ordered 2 fi Q 15s Friday (02/06/09). I know that it takes 2-3 building days plus the time it takes to deliver but I have heard that UPS just leave yr stuff at the door if they dont get an answer. Where i live if u leave stuff out it WILL be stolen. Is there a way for me to to find out the status of my order and its tracking number? Thanks

Well after a mere 5 months my Q12 has given up the ghost with no warning. I was pretty impressed with the Q. I was running it with a Memphis Belle mch1300 in 2.2cf @ 32hz Fisher box. The Q also had the BP option as well. I will also add that this is the first sub I have ever blown if that gives you an idea of how conservitave I generally run things.

Is 1800 watts rms too much for a BL daily in 2.25 cubes at 32 hz? also how loud are these subs? this will be in a regular cab silverado.

What size speaker wires would i need for my BL 15.

is paypal safe from hackers? im not familiar with paypal, but i know that its risky when you give your creditcard number in the net.

I have been slowly putting my system together, and I'm about ready to add the mono amp, replace the subwoofer, add sound dampening, and bring my front stage up to full power. To give you guys an idea of what I'm working with: H/U - Alpine CDE-9872 Front Stage - CDT ES-620 6.5" Component Speakers, rated 150W RMS @ 4ohm Rear fills - Stock, connected to H/U, going to stay that way Amp - TMA T320.4, currently hooked up to the front stage, 60W x 2 @ 4ohm, and the subwoofer on 2 channels total of 120W (will upgrade this amp at a later date, its pretty low-end, even though its made by JL) Subwoofer - TMA T12S4P, rated at 150W @ 4ohm, currently running at 120W @ 4ohm The curre…

alright its been quite a while since i have been on here but i saw that a recone link was added to the fi page....though it doesnt work its still progress.....so i have 2 12" Qs and the one has a fried tinsel lead and burnt spider....the other one just has a hole in the dust cap...i dont know how the kid did it but its pretty large...so what im asking is should i just send the one in and have you guys fix it and just buy a new dust cap then?

I have a friend thats pretty familiar with Fi and and most audio, he has told me that Fi is coming out with a 22" speaker in the future. I'm just wondering if thats a lie.

Concern: I really wanted fi bl15 subwoofer but.. Fi website seems half functional, and don't have a phone number for support or anything.. how can i feel safe by order it? and i emailed fi.. i never get email from them... so how can i trust them? cause i don't feel trusting them right now. hope hear from u fi guys! or else..

So, this morning at around 7AM, i get into my car, turn up the volume, and no bass. The sub wasnt playing at all. the lights on the amp were on, but i drive for like 15 minutes, still nothing. after 7 hours after school, i go to drive home, and still nothing, about half way home, BOOM the bass kicks in, just as loud as normal, no abnormalities. what could have caused this? ive had the setup installed for a week or so. 1 15" FI BTL Hifonics bxi-2608D Alpine IDA X100 headunit i have NOT checked ALL connections yet, but what else could it have been, it hasn't happened again yet. I will get a lot more concerned once it happens again, but right now, im not too worried.

Just ordered a 12" FI Q and a US Amps Merlin MD2D. Was just wondering if anyone else is running this setup or have any thoughts on it? I will be running this in a 1.2 sealed. Thanks ahead of time and hope everyone has a very nice week.

Yesterday i received the amp wiring kit and the 10ft of power cable for the "Big 3". Today i received the 25 ft of speaker wire and the headunit. The sub and amp should be coming in shortly and then ill be installing it... so now i gotta decide quickly on my box ideas. I have decided to get a sealed box... i guess about 2.6 cu.ft. there is only one thing left to decide --- which way the sub faces and where to put the amp... in terms of sub direction/placement, i was thinking of doing something like like having the box in the trunk and when i open that armrest thing the sub will be facing towards the cabin....i was thinkn like when u opened the trunk itd be like sealed …

So I recently just ordered my two powermaster 925's 220amp alt and 0 gauge wiring kit. My question is how do I wire the new alt to the current bat I have now and from the one under the hood to the rear 2 Powermasters then into the amp? Reply's will be greatly appreciated! Thanks, Dover

Ladies/Gents, I can't keep up with private messages. I had them turned off a while back and then some how or another they got turned on again and we've magically got space for 500 private messages...that I don't want to have in the first place. Please just email me. Nick " at " ficaraudio.com Thanks!

ok im fixing to order in a few days so i was going to get some opinions on what i have come up with what im looking at... i have been kind of stuck between the btl and bl....but i've finally decided on the bl i will be going with two 12"" on the options im going with dual 1, cooling,flatwind,daily, as far as the universal i dont plan on needing to change the impedence..... going to giving them around 2500rms in a 6 cu ft enclosure before sub and port displacement @35hz how does this sound....

why is it so hard to sell a fi btl 18" sub. i was selling it for 350 plus the shipping is that to much .