General Fi

hello, just trying to get some input, use to bass race a few years back, then "lost" all my stuff, so i'm now finally getting back into it. This will be strictly a dd set-up/bass racer. Tell me what you think, input is much appreciated. My set-up consists of the following: 2001 Chevy blazer Alpine 9857 200amp HO alt Big 3 done in 1/0 optima yellow top under the hood (3) kinetik 2400's in the back (2)Fully loaded BTL 15's (2)Audioque 2200d's strapped at 2 ohms 9.5 cubic ft. net crx style using 3 6" aero ports tuned around 34hz Does this sound like a good setup? Is the box a good size?? What kind of numbers can i expect with this set-up??? Thanks in advance, Daniel

danielhattie2000 (4 months ago isnt a btl a sandwich too? phsballin10 (3 months ago) thats a BLT asswipe danielhattie2000 (3 months ago) oh sorry

Oh, and some BTL

i have a lanzar OPTI 6000d- i have purchased 2 x 18 inch btl fully loaded, however i need help building an encloser. Can any one assist me??? i have a 2004 lincoln navigator. what type of encloser should i use???? im looking for something that pounds!!!

i have a lanzar OPTI 6000d- i have purchased 2 x 18 inch btl fully loaded, however i need help building an encloser. Can any one assist me??? i have a 2004 lincoln navigator. what type of encloser should i use???? im looking for something that pounds!!!

I need grilles for my 2 10" SSD's. Not the metra universal mesh ones please. I dont like the look of thoes. Does anyone know of any that I can use? I am not sure that grilles from Kicker, Fosgate, Polk, etc will clear the excursion of the Fi's. Please help if you can. I need them for protection more so than looks, with the exception of that horrible mesh, anything will do. Thanks in advance

I've been researching car audio for awhile but just now became a member here but so far this is what i have in mind for my system.... - Fi 15" Q sealed in a custom box (dont know size yet.. 2.6?) $274 - Sundown SAE-1200D $310 - Alpine CDA-9886 $299 Then i need wires for my amp and my sub... i was thinking of getting THIS for my amp and then use THIS for my subwoofer? Does that work or should i do something else? Also i would need to buy some extra 0 Gauge wire to do the Big 3.... Anything else??? Thanx in advance, Alex

Im ordering a 15" BL. what would be the best enclosure? my maximum dimensions are length = 24" depth = 19" height = basically anything but a ridiculous size. i was thinking maybe 18" but it can go way high obviously. is it best to max the dimensions out or stay within the 2.8 - 4.0 cubic foot range? and for my port it says 12-16 square inches per cubic feet. again, should i stay between there or would it be better if i go bigger? bigger is always better right? haha. HELP!

Hi, im jay, i was wondering about the SSD15, I noticed it is 800W RMS if i wired it @ dual 2 ohm to make it 4, AND put it on a [XLS crown802] which would give it 800W@4ohm perchannel, and 2100@4 bridged, Do you think it could power it? and if so how about 2 of em from the bridged? thank you and please respond respnd back if possible! Also what would i need to tune it to to listen to NUTTIN but low, around 28-32herts? thx! -jay

I'm looking at getting a 18" q or bl and im planning on putting a Kicker 08ZX1000.1 to it and getting a custom box built for it and will listen daily. I listen mainly to rap, i just love the loud bass you can really feel which one will give me that? I have a 2001 CRV so its an open trunk. And does anyone know the new line fi is coming out with?

Will Fi sell baskets? I'm needing a couple 18" 12 spoke baskets. Thanks for any help.

Which RE Audio Sub does the Fi Q 15 with BP Power resemble or is most similar to?

does anyone know the rms of a 12" ssd with bp and fw, d1 ? would it be able to handle a hifonics 1608d amp?

i was cleaning my truck and my 4 way fell off my folded up 3rd row seat and put a 1inch hole in my dust cap. does anyone know if fi will sell me a new one? the sub is a 18" ssd ? i just emailed them also

I just need any info on the fi 18"Q and if it would be better than an fi 18" bl

I sent a PM to Scott the other day, never received a response.. just wondering if he just ignores PM's?

Hey i'm getting a 15 fi bl but i only have 17inches max height check out this plan is it any good? http://www.subwoofertools.com/calculator_d...mp;sheet_size=0

how much port area should use for a 6cube box with pvc ports? is 4 4" ports enough?

Hello there. I am looking for a subwoofer to compete in Swedeish serie of Bassrace this summer,I've been looking at the BL's and the BTL's and i am not realy sure what to go with. Because thay need to handle music both loud and ("Good" if you can say that about SPL woofers). The Amp i got at this moment is a Mutant 1500xxx,so i have abit over 1500wrms to play with. I have send mails to you guys at FI somehow i haven't got an replay yet so i'll take this in the forum insteed. Is it possible for me as a Swedish cusomer to buy subs directly from you? Have a nice day // Confused guy from sweden.

Car: 1997 Nissan Maxima *No Bose Audio Package Trunk Dimensions: Width: 40 inches Depth: 28 inches Height: 16 Inches (Here are some pictures) http://i55.photobucket.com/albums/g149/Ore...k14/H011305.jpg http://i55.photobucket.com/albums/g149/Ore...eak14/H0113.jpg My goals: I just want to have a loud sound system, so I pretty much want to max out my maxima for a budget of $2500, this includes the subs, amps, comp speakers, deck, raammat, wiring, batteries, and alternator(s). Pretty much, I just want to get loud, and possibly enter in SPL competitions. I also like showing off to, and making my system be heard from many blocks away. My possible setups, let me know which is …

It's been a few months since Scott posted about the 10" spiders. Are they here yet? I have a 12" Eclipse basket with a variation of the TC9 motor and a pair of 15" Lightning Audio/TC-3000 baskets with 3HP neo motors that need recone kits. Also, since these are not the standard baskets that Fi uses, will I have to send in the subs for the recones or can a kit be built? -Robert

I ordered the 18" BTL on december 30th. I've been reading that they don't get like the motors in or some stuff till next monday? Thats fine with me, cuz I got a lotta work to do on my car. I have 3 batteries, one to replace under the hood. No alternator yet, but I'm doing the big three. Sub up, port back no speaker upgrades yet and headunit soon, but probably after an alternator does that sound decent for now? I'm going to start taking out my third row, and I'm paying 10$ for box specs from a kid named aznboi on an explorerforum.

Well, so i was ready to order my BTL last week, but scott was out of town... so i waited a week untill monday(today) talked to scott, but they wont get any BTL motors till Next Monday!!!!!! ahhhhhhh so im sad, it keeps getting pushed back, life is tough without mah BASS!!!! haha so with all of those options what potential power could i run it at?

lol so i have probably posted this on every site, but i just want to see on wide term who thinks what, what do you guys think is better with hitting lows and slappin hard, the FI BL or the AQ HDC3?

I have the space for both, the power for both,and the money for both. But which sub hits the hardest, has soild lows and has good sound quality. Is it the SSD 15 or the Q 15? someone please help me out. Thanks How do you calculate displacement for a slot port?