General Fi

Hey i'm getting a 15 fi bl but i only have 17inches max height check out this plan is it any good? http://www.subwoofertools.com/calculator_d...mp;sheet_size=0

Car: 1997 Nissan Maxima *No Bose Audio Package Trunk Dimensions: Width: 40 inches Depth: 28 inches Height: 16 Inches (Here are some pictures) http://i55.photobucket.com/albums/g149/Ore...k14/H011305.jpg http://i55.photobucket.com/albums/g149/Ore...eak14/H0113.jpg My goals: I just want to have a loud sound system, so I pretty much want to max out my maxima for a budget of $2500, this includes the subs, amps, comp speakers, deck, raammat, wiring, batteries, and alternator(s). Pretty much, I just want to get loud, and possibly enter in SPL competitions. I also like showing off to, and making my system be heard from many blocks away. My possible setups, let me know which is …

how much port area should use for a 6cube box with pvc ports? is 4 4" ports enough?

I sent a PM to Scott the other day, never received a response.. just wondering if he just ignores PM's?

lol so i have probably posted this on every site, but i just want to see on wide term who thinks what, what do you guys think is better with hitting lows and slappin hard, the FI BL or the AQ HDC3?

2 FI BL 18's with 2 sundown saz-1500d strapped, powermaster d3100 in back, 98 ford expedition, about 19.5 cubes before sub and port tuned to 33hz. may try to do a hair trick or something this weekend.

Hello there. I am looking for a subwoofer to compete in Swedeish serie of Bassrace this summer,I've been looking at the BL's and the BTL's and i am not realy sure what to go with. Because thay need to handle music both loud and ("Good" if you can say that about SPL woofers). The Amp i got at this moment is a Mutant 1500xxx,so i have abit over 1500wrms to play with. I have send mails to you guys at FI somehow i haven't got an replay yet so i'll take this in the forum insteed. Is it possible for me as a Swedish cusomer to buy subs directly from you? Have a nice day // Confused guy from sweden.

So I've been bumping two American Bass XD 10's powered by a mmats 1400.1 amp. I think I just burned up one of the subs so I obviously want to replace. I want something louder. My system hit 153.2db and that's with two 10's. I like American Bass's products but the VFL's are 1500wrms each and I don't want to buy another amp. I'm looking at the Fi subs and specifically the IB3 12's. Anybody have them? They're 50wrms each more then XD's (500wrms each). The amps 1400wrms @ 1 ohm so I don't want anything that's more then 650wrms each. Reccomend another sub? Thanks =)

I have the space for both, the power for both,and the money for both. But which sub hits the hardest, has soild lows and has good sound quality. Is it the SSD 15 or the Q 15? someone please help me out. Thanks How do you calculate displacement for a slot port?

Hey guys hows it going? I was hoping that ya can help me out. I currently have a daily/SPL setup in my car. I am bumping a pair of Kicker L7 12s with a Alphasonik amp that is feeding them a 1,000 watts each rms. I love my subs but I feel that I need to upgrade. My subs work great in the USACI lanes and I have gotten a offical 148.5 db with them. But I can not use them for daily use. After about 10 -15 I start to smell burnt coils ( Kicker L7s are only rated at 750rms each). So I am looking to get a pair of 12" BLs. My qustion is; what options should I go with in making this sub? Can I use my current box? It is tuned to 30hz and 4.5 cubic ft for each sub. I am not a hardc…

Two (2) Questions: 1) Is the Fi websie the only place you can buy Fi Subs? 2) If am supplying 2000 watts (Hifonics BXi2008D) to (2) 15 SSD, would it be better to inculde the flatwind or the copper coil feather on these subs? Thanks

I didn't know where to post this, but since I would be pairing it with a BTL, I posted it here but okay. I am still deciding on an amp. I was looking at a PA Bamf 5500d but I heard it really only will put out about 1500 watts at one ohm. So if thats true my better choices are the AQ2200d, and the Rockford Fosgate t2000 I notice everywhere that the RF runs for about 600-800$. At this fleamarket called Gibralter up here in Michigan, one of the guy says he'll sell it to me for 450$ So 280-300$ for the PA, 389$ for the AQ2200d, and supposedly 450$ for the RF 2000 What do you all think would be the best choice?

Im looking at purchasing two BTL15's and I'm leaning toward the Sundown amps. The SAZ-3000D is rated at 3000RMS and I've read that it's underated at that. Is this amp too much for a fully loaded BTL15. I plan on strapping two 3000D's to two BTL15's at 2ohms which should be 3000w per sub.

I ordered the 18" BTL on december 30th. I've been reading that they don't get like the motors in or some stuff till next monday? Thats fine with me, cuz I got a lotta work to do on my car. I have 3 batteries, one to replace under the hood. No alternator yet, but I'm doing the big three. Sub up, port back no speaker upgrades yet and headunit soon, but probably after an alternator does that sound decent for now? I'm going to start taking out my third row, and I'm paying 10$ for box specs from a kid named aznboi on an explorerforum.

Will Fi sell baskets? I'm needing a couple 18" 12 spoke baskets. Thanks for any help.

my buddy is goin with a 12inch fi ssd d1 fw coil, bp power, would it be worth upgrading to the 1608d or will the 1208d be jsut fine?

I just want to know which is the better sub, i think i know the answer but would like some other ppl opinion. Thanks

Alright Ive heard nothing but good things about you guys, and going to start saving up for my system and plan it out now. I have a 1993 camaro. Now my biggest dilema is my trunk, they are fudgeed in camaros.. I want a system with a little of box SPL and LOUD SOUND QUALITY... I want it to hit pretty damn hard and hit lows...but I also want decent sound quality. My choice right now is either between 2 12 BLS or Q's... Now if I can find anyone to build me a box or give me a design with dimensions for a camaro trunk ill go ported. But for now im stuck buying a box from these guys which only come sealed with 1.0ft per sub for 12s. http://www.subthump.com/acamarowell.htm And w…

I ordered last Monday the 22nd and I just got a tracking number in my email. Does this mean they shipped it out or what?

Well, so i was ready to order my BTL last week, but scott was out of town... so i waited a week untill monday(today) talked to scott, but they wont get any BTL motors till Next Monday!!!!!! ahhhhhhh so im sad, it keeps getting pushed back, life is tough without mah BASS!!!! haha so with all of those options what potential power could i run it at?

is 1100 watts at 2 ohms too much for a 12in d1 ssd? with bp power.

the BL costs $244 and it will be shipped to anaheim ca. i just want to make sure about the cost, will the $244 be the total cost? or will there be addt'l payment needed?

i'am planing on buying a FI Q. i' am just worried because i will ship it to another country and i might have trouble with it if it has a defect or when it gets broken. does FI get this kind of problem? wherein the costumer returns the subs because it has a defect? or you just get this once in a while?

will i need an extra bat for a 12" FI Q, and the amp is dls a6 mono amp, about 1000 wats rms. my current bat is a bit small because my car is also small, lol. Thanks in advance!

Ok guys background on my truck 2006 chevy trailblazer ss alpine pdx 1000/1 amp my subwoofer box is ported and has these specs 2.0 cu. ft. Total Volume Slot-port tuned @ 32Hz Double-Faced Front Baffle (For added woofer support!) 11" Round Cutout Dimensions (W x H x D): 30" x 13.5" x 16" I currently have a 12w6v2 jl subwoofer and would like something that would pound harder than that. also what does the folling things do next to the subwoofer Configure Speaker: Ohm: dual 1 dual 2 (ok i know this one) P Chamfer: no yes ??? Cooling: no yes ??? Flatwind: no yes ??? Daily or SPL: ??? Extreme Lead: ??? Universal: ???? Quantity: Any info is apprecia…