General Fi

got a 15 Q with bp option and a sundown saz 1000d....can't wait for them to show up. Had a 15 bl with all options and hifonix 1606....had to sell it cus I needed money at the time. Went with a q cus I love sealed a lot more. CAN'T WAIT!!!

Just ordered a 12" Fi Q and I was curious as to how "Fi" is pronounced? Is it like: Figh (like high) OR Fee (like See) Just curious

i have a lanzar OPTI 6000d- i have purchased 2 x 18 inch btl fully loaded, however i need help building an encloser. Can any one assist me??? i have a 2004 lincoln navigator. what type of encloser should i use???? im looking for something that pounds!!!

Just stopping by to say hello its my first post over here and im making it because i have two packages coming to my door in 2 days Its two 12" SSDs cant wait to get them installed even though i think im underpowering them a bit (running em off of a zx1500.1) They should destroy my 2 12" CVR! even though im disappointed that my original shipping date got moved back from today to the 15th im still pleased with FI cause i know they make em well thats all the talking im doing for now till next time

I went from 4 alpine type R 12"s in a sealed box with a Hifonics 2008d Now i have a 15" FI BL with a sundown SAZ-1500d in a ported box tuned to 32hz and it kicks alpines ass, no question. From 4 subs to 1 now its louder, clearer, and has more low end. VERY VERY VERY satisfied!!! thanks! My rear view mirror wont stop slappin, and my doors are all flexing not to mention the roof, quarter panels, and hatch.

Just wanna say thanks and great build on my fully loaded 15" BTL. Everything looks great and top notch. Shipping was fast, packaging was great and I think it goes without saying the sub is awesome. Did you just recently start putting the little black felt pads on the bottom of the cone for the tinsel slap? Thanks again for the service and the sub.

Hey just doing some window shopping looking for opitions for my amp hoping to ad Fi to my list I'm not looking to buy soon and I know alot can change in a company's line-up over a year but I treat car audio like my version of a fantiacy football league and I'll do builds in my head waiting to hit the lottery or my kids to graduate so I can have more toys... How I like my bass... Loud, Low, & Clean as posible I listen to just about everything but mostly rock and rap Car... not positive leaning toward a smaller hatchback like a honda civic or mini cooper, either way the space required for humans can be limited to the front seats and enough room for a suitca…

How i could get some mid sized fi decals for my trucks back window, and also apparel?

just want opinions what do most of you guys use? I have them wired with 12 guage right now. Was wondering if it would really make any differance if i used 10 or 8 guage or would the 12 be fine?

I bought 2 fi bl 12s on feb 20 and still still never receive them. Just was wondering how long suppose to take? By the way i live in hawaii if that make any difference.

Just did this for SI, now I see it happening on Fi.... http://forum.ecoustics.com/bbs/messages/4/349209.html "Probelms with BTL's?" -Kevin Holden

Meant to say single wall boxes but that just didn't happen i was too enthused at laughing about the basket making noise...even after all of that the sub still works.. Anyhow...keep your packaging. Don't send us this stuff back with a bunch of peanuts or anything in a single wall box and expect a 70 pound package to not be broken in 30 pieces.

Just thought I'd chime in... haven't been around any forums lately, and I haven't talked to Scott/Nick/Shawn for a couple of months. I'm glad to see business is still booming. I purchased my first 18" fully-loaded BTL in August I believe... waited for my 20.1 to come in. Got the 20.1... and we built a 10 cube ported box, tuned to 30hz in the trunk of my 1996 Chrysler LHS. I gained close to 6 decibels going from an 18" SX and an Orion 1200D to an 18" BTL and a 20.1. My buddies Tom (forceofwill) and Robin (iamamp3pimp) with the BTL: After a local show (not sanctioned): It was loud, lasted me a few months... but then I had the desire to do a wall. It started out as a smal…

i just put my set of 15i bls in my focus' hatch and i just wanted to say that im beyond impressed. i replaced 4 12 w3s and its night and day. great products im very satisfied..thanks guys *]jl xr 6.5 components x2 sets [*]sundown 2000d [*]sundown 100.4 [*]jl tr 5.25 coaxials x2 sets [*]2 15 fi bls ..fully loaded [*]4 kinetik 800s [*]160 amp alt [*]2001 focus zx3

i have a kicker zx1000.1 which is rated at 1258 watts at 2ohms. and i was wondering if this will be plenty of power for a daily setup with only the pole chamfer on the sub, o and i listen to rap 99% of the time, so im thinkin that this will be fine, and im also leaning a little more towards the spl side over sq im goin to bulid a box soon for it, it will be 4cu. ft. @ 32hz, dont know the exact dimensios but i will know soon thanks

Sent scott an email, but I understand he is super busy so I figured I would post up a topic here too. Ok I have a RE MT motor, that I need a recone for. Need everything but the dustcap, (recone, gasket, and a 12" basket). I really need this recone by next friday ( a week from this friday). What is the usual turn around time for a sending a recone out? And also I left out in my eMail I would also like a 2nd day air quote for shipping, because the sooner I get the softparts the better . shipping would be to 71052. Thanks again.

well got a BTL today. and when installing it i couldn't decide whether to take the logo off the bottom or leave it.. i left it.. should i take off the logo on the bottom of the magnet? i have the cooling option and the hixmcoil option. it didn't seem like sticker i should've taken off.. i just played it for like 5+ hours and it was fine. then i looked at some BTL pics and none have it that aren't already used.. only just unboxed ones have it.. should i take it off or what? thanks.

:post:

I can purchase two blown konaki 12 subs for 40 dollars per woofer and was wondering if I could send it in to Fi for a recone or purchase a recone from fi, I know you have to replace the basket as well... but if I can recone them for cheap it would be a good investment I think.... Thank you for any advice in advance ~ jonathon. (oh and these look just like the audioques just as a reference to which subs i am talking about)

I just bought a brand new Konaki 12", I plan to recone it down to a 10" and run a pair daily off my kx2500.1, I would like to get a shipped quote to 26851 for a 10" DVC 2 ohm kit, I would also need a 10" basket and rubber gasket and FI dust cap, I know they are included but I would like to get one with the FI logo on it. I plan to run 1200 watts to each Konaki 10" once I get them reconed, I dont know what coils or kit Scott or FI would use but I need/want something that will take 1200 watts rms, and be good for a daily type install. I tried pm'ing Scott but his box is full, pm sent to NDmustang

can FI recone a kove audio armageddon 12 inch sub? looks like kove is no more and a buddy has some blown subs layin around. scott ill probably send u an email and/or PM also.

Alright so, I got t-boned a week ago and got 3300 from insurance, when the damages where 500$ worth but, to my question I have a 15 L7 and amp lying around from my old system, which was 2 solo's and 2 amps and I was wondering, is there anyway I could build a box to where I could have my solo and BTL 18" and they both benefit off each other without drowning each other out? Anyone ever thought of this? Thanks, Dover.

Is it possible for a lanzar 2000 to power 2 15" FI BL FL and still have 1100 watts to each? thanks

Tomorrow will be the last day to capitalize on the sales, get the deals while you can.

Alright, I have 2 Fi X12's in a prefab ported box right now. they sound alright but not great. Either I put ~$200 into a box for them or I save up and buy a Q15 and a box(~$300+$200). my question: how much better will the Q sound than two 12X's? is it worth waiting to save up for the Q and the extra $300. Thanks, Ben