General Fi

Fella's i was wondering about the decals from FI. I want to purchase the white decal so it will show on the rear window of my car but which color do i choose on the page here to get the white decal? Also the ones they send with your purchase dont work at all. How do you get the to not show the rear when installing them on your car?

I just looked at my woofers, and noticed the "Chrome Red Fi" is coming off the cone. It isn't peeling from the edge (like at tip of the F or I as if something peeled it back) It is coming from the middle part of the logo as it bends over the dust cap. It almost seems like the foil-ish vinyl is flexible enough to follow the curve of the dust cap? I think standard vinyl would have been fine? Anyway, anyone else have any issues like this? Is it possible to get replacement logo stickers for the dust caps?

Here is the system: Basic Kenwood deck (for now) feeding a US AMPS 6000. US AMPS 6000 feeding one BTL 15. For now, two runs of 0 gauge running back off a 250-300 amp alt feeding three Stinger 1700s. We want to do street beat under USACI rules which is pound the crap out of it for 30 seconds. The amp will not be ran at full tilt just so you guys know. I was wondering what kinda box you guys might recommend and should we get the fully loaded BTL or are there a few things we don't need. This will make for one of two FI systems being built this season and I will keep you all updated as the builds progress. If your interested the other is four FI BL 15s running off fou…

From today (10/18) through the end of the month (10/31 for those that cant remember ) if you buy a BL with the flatwind option you will receive the full cooling ($40) for free. All orders will be automatically upgraded. Just a little thanks to the forum and customers that have helped Fi make it through its first year. Thanks, Scott

Thanks to the closeout over @ SSA on the fi subs i picked these bad boys up for HT duty, should be getting around 100watts each sealed woot tiny pole vent lawl coil shot

im looking to get a 15 btl. should i go 1 or 2 ohm and amp? and yellow top? and anything else you could suggest?

Just curious if there's a reason the Fi Q series isn't showing up on the website...Either way, could someone possibly give me the specs on the 12" sub. I need the detailed specs so I can input the sub on WinISD to attempt a box design.

So i understand that it takes 3-7 days to build the subs and such, its been around 10 days, so i figured id try to check on UPS tracking. To see where my Sub was via shipping. I looked at my pay pal confirmation and it gave me a tracking I.D. is that the tracking number? because every time i use that number it says that its invalid. Also what shipping company or method does Fi use? I live in south Florida, so it shouldn't take long to receive my order right? Thanks Please, any info appreciated

Hi my name is charlie , Mike Bartell suggested that i contact you guys. I am building a street max 1-2 truck , and am looking for the most efficent sub i can get as this class only allows a single battery . I'm interested in 2-15" subs that will take burps of 3000-4000 watts of clean power. Many companies have these 20,000 plus watt woofers and i fear that they will be too ineficent for my application. Thanks in advance for your time Charlie

I ordered an 18in Bl on 1/20/2013 using my dad's credit card and it sat there saying "awaiting payment" for a couple days now and I thought I put in some of the payment information wrong, so I reordered the sub using MY debit card. I've emailed Fi a few times and I just want to make sure that the first order doesn't get charged to my dad's card, I DO NOT WANT TWO SUBS!!!!! SOMEBODY FROM Fi PLEASE RESPOND.

I just wanted to say that Fi Car Audio has without a doubt the best customer service of any other car audio company i have ever worked with. I would just like to say that i will be recommending Fi audio to everyone i know. Thanks.

Hey I emailed sales [at] FiCarAudio.com 10 days ago and then emailed Nick and Shawn a day later. I still haven't heard back from anyone. I'd like to order a Fi Q 10" no BP Option. I can't place the order via the webpage because I'm in Hawaii. I know shipping is going to be more, thats okay I'm ready to order now. Please get in touch with me. I emailed the request from dj.kickz [at] gmail.com

Invoice number: I-10425/00 I was wondering if this sub will be finished by the end of the week? I have a competition to go to on 4-22-2007. The reason I ask is I need to get this insatll done before the competition and work out any of the bugs that I might run into. Thanks

ok, i have two q 15's w/ bp power and I was just wandering what the actual power handling of these is with the bp power? I want to power these with an IA 40.1 if not too much and my box is 8.18 cuft. tuned to 27hz. I also have two optima 34/78 yellowtops in the rear and a red top in the front with dual runs of 1/0 to the rear and dual 1/0 will be going into the amp also. thanks

Does anyone have the parameters for the older 15" BTL's?

I've got some subs sitting here at the house needing recones. I was wondering if Fi has recones to fit them. First up is a 15" Kicker CVR (2inch VC), next is a 10" MA Audio MA100XE (2inch coil), and finally 2 Mass Destruction Sidewinder 12's (2inch coils). So does Fi have any kits that I can recone my subs with? If not, where can I look to find a kit? I can get further measurements if needed just tell me what I need to measure. Thanks alot!

currently have 2 fosgate t1 12 and a bd 1000 had a kicker sx1250 and 2 l7 12s would 2 ssd 12 and the t1001bd louder than either of these? or are they about the same?

Is 1800 watts rms too much for a BL daily in 2.25 cubes at 32 hz? also how loud are these subs? this will be in a regular cab silverado.

I have a Hifonics BXi 2006D, and i need to know if i should get a Q or a BL. The amp pushes about 1600watts. also what options? I would use for daily use, i listen to rap. I was thinkin on going with the BL but if i could get your opinion. Thank You Wes

I order a 15" ssd on june 20 I just like to know the status of the order. I understand that you guys are so busy . just like to know if possible when i'm getting it

Looking for some dimensions for a 15Q. It will be powered by a sundown saz-1000d. Its going into a 2008 scion xb. I would say I have about 2'x2'x4' area to work with. According to specs it should be 2-2.5 cubic feet. So probably stay around the 2.5 to account for displacement. I know you guys are miracle workers. I tried to remember to put as much info as possible I know people leave stuff out all the time.

Pretty much as stated at the top, I'm just curious if they can recone it for me, and if they do will I lose all the linear travel I had? How will it affect my power handling and sound quality? Thanks for any and all help guys.

hi all. i will be buying some ssd's with copper coils as soon as my tax money hits my bank in a few days. i just want to know if this is a good time to order cause ive been reading that the guys are swamped. if i order just the regular woofer does that shave any off the build time? i live in NC so i figure with build time and ground shipping it should be about two-three weeks. is this a fair guess? just curious, wanna know about how long ill be waiting after dropping almost four hundred bones ya know? i hope this is in the right section, and someone can ease the anxiety as ive never ordered anything of this amount off the net before. thanks for anybody's help in advance.

I'm a noob so bear with me. I would like to have some trunk space available after i put my box in. Interested in a ported box I really want the 15BL but i am afraid it'll take up to much trunk space but i can settle for a 12BL if i need too. If i choose to go with 12BL or the 15BL, what dimensions and tunning spec so i go with? I listen to old school rap, trance and a little bit of alternative rock. Also which voice coil option should i choose to go alone with my amp? Current amp is autotek SS 1900 Thanks all

I know people say it takes about a month of (break in time) before the suspension loosens up so... currently i have about 1 hour of play time Is there a limited amount of power i should be feeding it before i give it the the 1,200 watts daily i planned to? ** Setup ** Sub: Fi 15 BL Enclosure: 3.8ft^3 @ 32hz (ported) Amp: Saz-1500