General Fi

the box i have is 38 x 16.25 x 22 the port is 4.25 wide. i was thinking of getting two fi BL 12's. i currently have two alpine type r 12's. do you think this box will be big enough for the lack of space i have.

I need a shipping quote to 32583 A 18" SSD and a 18" BL. Is this the right place to post?

Just wondering if anyone has pics of the BTL with the triple stack magnet, any size, would prefer pics of the 18 though. Thanks. dan

I have a tahoe and i was curious just to see what your opinions on my set up would be? I 'm looking to do 2 18'' ssd's, epicenter, my question is should i go with 2 old school punch 800's or a memphis mojo 2500? i'm looking to do 150-155 db

I know that because of the weight of the bl15 i need a double baffle box. But what if any is the best way to secure it to the box? (via regular screws bolted in etc)?

so around this christmas im debating on wether 1 btl 18 or 2 bl 18's would be louder, i want LOUD. I know that the btl is fi's loudest sub but 2 18's have more cone area, ill be running 1 saz3000D either way i go. what do yall think?

Car: 2000 Ford Explorer 4Door Current system: Apline CDE-102 HU Fi 18in BL 09 1500D Sundown all 1/0 gauge knu wire. 8cu ft box. sub facing roof/port facing hatch. Tuned to 32hz I must say that I am very pleased with FI and their product, I am just wanting my system to be maximizing its output. My first hing which I plan to improve is running big 3, I am NOT having dimming in my car and is it really needed if it does not effect the output of the sub. I was thinking of making a better designed box that has both the sub and port facing the rear. I was also thinking about putting dynamat in the trunk door of the car to help with rattle. Any more suggestions would be great or …

I havent powered my subs up yet, nor have the been mounted. They've been sitting in the boxes they came in since I got them last year as a present from my gf. Not dropped or anything like that, its weird I've never seen anything like it. I pulled one out to show a buddy of mine the sheer size and outstanding build quality. While doing so, I noticed a crack in the magnet. Not a small crack either, it goes horizontally, all the way around the sub. And it wasnt there when I got them. I've emailed Scott, but I would like to see what you guys think. I'm a little concerned. And I was planning on inverting them, cause they have a very sexy ass. Here are a pictures of the crack: …

So, never owning a car in my life, I am getting my first one very soon....big change from trucks and SUVs. I love SPL and am not entirly sure what to do. I was planning on either doing 2 12" Q's ported or 1 12" BTL ported, this is gonna have to be a tough decision for myself. If you have an opinion on what you would prefer, go ahead, be nice to know what other people think. But here is what I need to know also, which way should the subs and port face? They will be going in the trunk of course. Is it correct in saying that the bigger the box is, the smaller the ports need to be and vice versa or no? Just heard this the other day. Any advice at all as well as the an…

i find out i get canned from on of my jobs today and was kinda depressed and then all of a sudden the doorbell rings. Sure enough it was my brand new 15 " BL's. this made my day possible my week. i totaly forgot i got fired lmao. next week i start my install monday morning first thing. pics wil be up soon after the install

Sorry to say that there will be email and "some" order delays from today through Monday 10-16 due to several of the Fi staff attending the 3 dB Drag world finals shows through the US. We will have 2 people on staff running some production but the balance of the shop will be "closed" through then. We will resume normal production and emails on Tuesday and get things back up to speed and make sure that all orders are filled ASAP. Sorry for the delays, but we will try to keep you all posted on the shows as well. Thanks, Scott

Im ordering a 15" BL. what would be the best enclosure? my maximum dimensions are length = 24" depth = 19" height = basically anything but a ridiculous size. i was thinking maybe 18" but it can go way high obviously. is it best to max the dimensions out or stay within the 2.8 - 4.0 cubic foot range? and for my port it says 12-16 square inches per cubic feet. again, should i stay between there or would it be better if i go bigger? bigger is always better right? haha. HELP!

I am thinking about running 3 Q 12's in a boat. I had already made boxes that are .95 cubes a piece when I ordered some Brahmas. Due to Adires current situation the brahmas will not be coming. Anyway, can anyone tell me how the Q works in a sealed box, and if possible how it compares to the brahma. I have not ordered an amp yet, but was hoping to give each sub about 800 watts. Is this enough or do I need to find a larger amp? Right now the only other line I am looking at is TC. I am between the TC-2000, TC-3000, or Q. I also thought about a SSD, but it seems the Q puts out more spl as well as better sq, which would be perfect as I am looking for a LSQ install. Th…

is it possible to get a recone for an old xxx 15 built? i know it was possible a few months ago but i know yall are busy to. and SORRY scott. i had sent you an e-mail before reading the sticky on NOT SENDING YOU E-MAILS other than shipping info.

So, I am lookin for an amp to run 2 10" bls and am not entirely sure what to go with, would something like a RF4000.1 be good or should I stay with a 3k watt amp....in which case, what is a good 3k watt amp

I took my sub (btl) out to test out another sub and then I notice it.....damn tensels ate into the spiders. I was wondering, do the new recones come with the tensels woven into the spider? And how much would it be shipped to austin texas 78741. I'll have to wait to get it but I AM A play this one out until it dies. kinda broke. thanks

What does rescheduled to 3/7/2007 mean? Is that when I can expect it. UPS is showing my sub as rescheduled to 3/7/2007.

Added free cooling on lines that have it (N2, BL, Q) For today and tomorrow only. Saves $30... Thanks, Scott

I can design shirts, put them on basically anything you can wear and sell them for free in a store. Let me know if we can work something out and give me your email so we can talk about it!

My system is going to be for daily driving , I have both my amps, both my subs, and my box is on the way. Ive heard alot of conflicting replies though about the amount of power im throwing to the BL's. They are RF1500's but the birth sheet rates them at about 1700, so pretty much each sub will get around that much if my electrical is good enough. My question is, will the loaded BL's be able to take this daily?

Hi Fi...I have (2)Audiomobile Mass series motor structures. no frames or top parts, just the magnet strutures. They are(were) 3inch underhung dvcs. Can they be rebuilt at all? They don't have to be dvcs. I would actually prefer single 4 or single 3. They need whole new top assemblies and softparts. Can this be done...ballpark cost for 15's. Thanks for any info.

Dose Fi still make the 08 models or do they only make the 09 models now. Cause i want to get another 15 and i have a 08 model that means i would have to sell the one i have and buy two 09 models. I mean it wouldn't be a bad thing but i just don't want to deal with the hassle of trying to find someone that will buy my sub. Thanks, Kasey

i have a maximum of 42" wide x 12" high x 19.25" deep i can use keeping everything else stock. The amps will be mounted on top of the box but an extra Kinetik battery in the back WILL take up some of this box room. After some calculations, i came up with 2.8-3.0cuft NET after displacements for the 2 following setups- 3 10" Fi Qs SEALED off of 4,000w or... 2 10" Fi BLs PORTED at 34hz off of 3,000w I wish i could do 12s but i do not think subs and port up would sound good. PS- i dont have room to do 12s unless i aim them up and can only do them if i port up as well...i have no boxes to test how that would sound either...)

so i have a 15" dual 2 ohm Fi Q, my sundown sae-1200d is gonna get repaired. i picked up a memphis mojo 2000 that is a 2 ohm amp. i currently have the Q wired up to a 4 ohm load and is hooked up. im just wondering why it does not get that loud? is it because it's wired to 4ohms? am i not getting the full power of the sub?.or is it because the sub is new and it's the first time it's seen power?. it's just weird becuase i can turn my kenwood deck up quite a bit., and it wont get as loud as i thought it would. some songs it will sound loud...maybe just wait it off and let the sub break in first? any help is appreciated, especially if you been down this road with the same sub…

like the topic says.... who do I contact? I've dealt with Scott on previous occasions but his number cell seems to be off and voice mail is full...lol... busy man... so who do I contact? thanx, Peter