General Fi

ok i have two 1000 watt rms ams and not lookin to buy new ones just got these and i need two 12s and id like for them to get lower and louder the a w7 12 and yes the box will be disigned well but im need to know from the FI guys what would be the best sub for daily use to handle 1000rms and beat a w7 thanks i was lookin at the FI Q and BL ones but someone let me know and i want to power them right not under power them

does any body know which Fi sub series are almost the same in pawer as the kove armageddon i am planing to use fi's because it is hard to find the kove armageddon that are new.

i have 2saz 3500 shipping and want to know what to go with 2 fibtl18 or 4 ssa xcon 15 i want spl!!!!!!!!!

a friend of mine is needing a recone for a 12 inch atomic apocalipse can you do this recone and how much is with shipping 00725

First i'm from over at ca.com and do amp repairs over there.Everyone over there is great and added to come over to fi and talk to scott about picking up 3 drop in recones for re's sx 15's.So my ques. is can i have 3 re sx 15's drop in recones for them and the price plus shipping.Really i just want them as close as everything from the org. as possible with 3 layer spider,dvc 2 ohms with the fi soft parts and tensel about the same.I have a btl 15 that i reconed and before i did the install i put it in the re sx and fit perfect.Please let me know,thanks.

Im lookin for 2 15" recones for my shocker extreme motors. Had apx recones in there before which were somehow assembled wrong from the factory. If theres a number i could call to reach fi directly or if they could email me at [email protected] that would be great. Im hoping to have these by mid next week if possible. thanks

are you guys shipping international? if so.. can anyone send me information on how to order 15" fi BTL? needs some advice..

im looking for 3-4000 watts its going to be for 2 btl or bl's 2+2 coils. im re-modleing my house right now so cash is kinda tight im looking at 2 pca 2000D's, 2 autotec 2000D's or 2 bxi 2006's what do you guys think i should get? or if anyone has a hook up that will work let me know.

First off, hello, been lurking for awhile finally decided to post. I need some help. I want to add some subwoofers to my car. I am going to start with 1 sub, would like a 15, but possibly a 12. I have searched high and low to find something I truly like. First problem is, I have only heard 13w7's in the same car I have. I don't want to drop that much per speaker and I don't want something everyone else has. I have been leaning towards the 15"BL. Amps, I have access to kenwood KAC-9103D for cheap, but no sure I want that either, because I think I would have to have 2 to push the BL. I seriously doubt they come close to the 1800 watts they claim. No one around her…

Hey guys I need some fast help......Through a friend of a friend I know somebody selling a fully loaded btl 15" 1 ohm......only problem is I want to put it in a 2002 cavalier trunk and I am not sure it will fit. It does not come with a box right now so I will have to have one made....my question should I even bother buying the sub? Is there any chance of being able to make this beast fit lol.....I know I should go get my trunk measurements but its late and dark were I live so I will have to get that tomorrow. Thanks a lot for any help anyone can give

Hi everybody, I'm planning on reconing from 12 to 18's. But I'm a little confused, the subs are BL 12 D2 PC. The problem I'm having is the wire looks to be flatwind, I had taken pictures because the coil does not say FW. Also the shipping info does not say Flatwind, infact next to flatwind it says no...Help!! Thank you.

Ok, here is what is going on....the truck is a 08 Ford F-150. I am going to do a blow through in the truck. I would like to compete once in awhile and just want to get really loud. After taking some small measurements I figure I could fit 4 12's straight across the back or maybe 2 15's. At the moment, I plan on running a Rockford 4000.1 to power them. Of course the 12's would probably be BL's or Q's and the 15's would be BTL's. What would probably perform better out of those? I am going to be new to competition and am not really sure where to go. Any help or questions for me would be great. Thanks.

Okay, here it goes. Please dont flame me. I tried searching and read through a bunch of posts before making my own thread. I have 2 BTL 15" 3 stack that I bought used and they are supposed to be fully loaded. One is pretty beat up so I decided a recone was in order soon. I got them cheap so I wasnt concerned and I knew they could be reconed. I had these 2 subs in my 95 grand marquis on 2 mmats 2100.1. I have 220 amp alt. Big 3 0ga and an Optima yellow top. The box was a little on the small side. I dont have the exact specs but it doesn't matter..... I was driving my car minding my own business when some dumbass with a dodge dakota towing a 27' camper decide he wants to c…

Ok, I need some help. I've decided to get an 18" Fi BTL for my expedition. I have no idea what to power it with.....Sundown? Kicker? what?.... I'm kinda indecisive on the amp because I know its recommended for around 1500rms , but we all know they can handle more. And I want more Safely, do you think I should go with some 3000 watt amp - such as the Saz-300d ? Also, with a 150amp alternator, can I get by with two yellow top batteries? Or should I get a 240amp alternator? And if I do get the upgraded alternator, will I still need a battery in the rear?

hey everyone! im diggin the fi audio products! trying to figure out what i want before the 14th on my b-day ... need to know if i should go with a one 12" BTL or BL.. this will be for daily.. budget is about 12-1500 for sub box and amp.... going in the back of a blazer xtreme.. box specs and amp opinions please! any info will be appreciated! thx

I have a '96 Nissan XE (extended cab) truck. I'm wondering if I can get the right air space for 4 BTL 15's with a hard tonneau cover or will I have to get a camper shell. Also, anyone know pricing and wattage on 15" BTL Loaded and BL Loaded? I'm wanting something I can use for daily and SPL comps. Are these good speakers to be used for both?

Guys buying one of my 2500's...wants references So uh yeah...post please

i have a Bl 15" that is blown and it needs to be sent in and repaired. but while its being repaired i was wondering if theres a way to upgrade it to handle 1500 rms..if so how much would all this cost to get fixed? or would it just be cheaper buying a fully loaded new one?

i was reffered to you my "Black00" i am looking for subs that do StreetBeat/BassRace for a wall i prefer 15" but am open to doing 12" i have heard people discussing Fi @ Spl competitions in Dallas & Ft Worth Tx but have never seen an Fi sub go live... seems to be a killer looking sub . what do you recomend... i am in a 1996 Chevy X-cab w/rear seat removed. amps are mounted to the rear wall bass amp is a Massive P3000.1 1ohm per ch 2ohm bridged

Hi i was wondering if somebody know the pecifications of a fully loaded btl 18?? im getting ready to build a box for it but fi has taking the old btl out of the website and i know the pecs, does anybody knows them thanks.

I ordered and paid for a Sp4 18 d2 one week ago. Sent an email the next day about adding carbon cap option and have not got a reply. Any help would be appreciated.

I am hoping that scott or nick can help me with this...i sent an e-mail and i know you guys are busy, but i have not gotten a response yet so i'll reort to the forum again... i need a dust cap...the outer one...i have my speaker reassembled and this is the last piece of the puzzle...i was wondering if i could buy one preferable a blank one....is this at all possible scott or nick? thanks for the time

Hey Nick, I've only e-mailed you 27 times within the past couple of hours, but someone suggessted I should put it here JUST IN CASE Need to get my order changed from dual 1 ohm to dual 2. Everything else should be exactly how I ordered it. Invoice # I-15944/00 Thanks.

I ordered a BTL 18 today, dual 1 ohm, and I was wanting to see if I could change it to dual 2. I'm using a RF T-1500, and I got to thinking that with the dual 1 I would either be able to run a half ohm load or 2 ohm. I'd like to change it to dual 2 since the amp isn't stable at a half ohm. My invoice number is: I-14072/00 Thanks for the help!

I've emailed sales@ and nick@, is there some other way I can get in contact? I posted in here a couple days ago on their "we're busy" thread, but no response http://www.soundsolutionsaudio.com/forum/i...st&p=353212 If it were just for me, I'd forget about it and move on, but I'm stuck in the middle of something that I'm already financially committed to and the guy is starting to lose patience. I'm OK with deleting this once it's handled. no need to clutter a forum.