General Fi

Guys I saw a posts on another forum (i have been searching for the link somewhere) that they talked to an Fi audio rep and was told that the copper coil option increases RMS handling.... T or F Thanks

https://ssl.perfora.net/ficaraudio.com/sess/utn;jsessionid=154e941f8341dcc/shopdata/links.shopscript BLK MARKET MOB More Pics comeing soon...If you have 'em post them up.

I would like to purchase a Q series 18, however, due to some issues with unauthorized use of my paypal account, paypal has locked my account and blocked my card number from being used. Are there any other ways that I can order with this card?

would this work, a Hifonics Brutus bxi 2000w with a 18 inch btl n2? what would the ohms be when i by the btl? it would be dual 1 right?

Ok i am gettin a 240sx do yall think a fi btl 15 or 18 wood blow out the windows of the car and if so what is a good kinda glass to get to keep that from happen

I know, I know there is no definite answer at all to this question. Again I know!!! LOLOL Currently running a 15" BL w/ a RF T10001BD amp. Ok loud not the greatest but the best I can do with my limited trunk space of a scion tc. I whined before here about loosing my trunk space currently! I am sitting here and out the corner of my eye sits a 12" RE SX sub that I just reconed with Fi parts. Originally with that RE SX sub it was in a 2.0cuft box tuned to 32hz and I hit 139db with a TL mic (amp running at 2ohm so roughly 900-1000watts). With my current box with that 15" it sits in a 3.5cuft box, and I don't have my spare tire anymore or any trunk space! With the 15" …

Ok so i have 2 12" Fi SSD Dual 1 ohm subs, and i want to have a final ohm load of 2 ohm. Can someone show me how to wire them?

Sold my Current system this pas week, along with a old fender amp, and cashed in some savings bonds, brought me out to 1124$ I have spent about an hour to 2 hours picking out what I'm gonna get and I've pretty much narrowed it down after looking over multiple options and I've finally got it down pat! Subwoofer: Fi BTL 18" fully loaded Amp: Massive Audio P1500.1 3000W Class D Pro Series Amplifier Capacitor: SPL CP5.0 5 Farad Capacitor In all left me with 179$ which, I honestly didn't think I would come out with that speaking shipping etc. So, I'm hoping to use that to buy a box or have one made, so tell me what you think!

hi i'm an old guy, got a fi q15 on an saz 1500d in my suv. my son wants to go to sound comps, so i figured on getting another saz1500d to stap and getting a btl for the weekends. don't need to win but want to at least be competitive enough to keep his interest and make it worth the effort so how much difference will the average user find between the old 2 slug btl and the new 1 slug ? and is the difference enough that i realy should be looking for a one slug. i get that they booth are going to be crazy but on the meter does it matter that much ? i've heard pepole say it wasn't worth upgrading but i don't own either yet . thanks

Hello everyone its me again as u may already know i like to ask a lot of questions but thats how i learn, now i need to know if the new btl is a lot better than the old one???i need people with experience who have owned both???

Anyone got Old style FI BTL 12 or 15? max 320 $ with shipping

i have the last version of the btl 15" fully loaded with the 3rd mag and everything.......which one is better the new one fully loaded or the one i have...it is still brand new only used it for 1 month....i dont know which one is better??? please help and if i sell the btl i have what would be a good price?????

i was just wondering if you can still get the older style btl's?

ok so my old sub quit working and was smoking in the box right took it out and decided to play with it and is working again but absolulely stnks when played but seems to pound just as hard wtf is going on? is it ok or is it bad to play like that

how much longer will the old x series woofers be selling i bought two of them but but in two weeks to a month id like to buy two more i absolutely love them and want more lol so as soon as i save up the money i want two more so i hope they will last long enough for me to get them

Does anyone have the parameters for the older 15" BTL's?

I have a older dual slug Q and I want to run two Q's now. Would I run into any problems running a newer Q with athe older one in a ported enclosure?

Which would be the better choice? Looking for very loud. Listen to mainly rap. Going in a ported box in my trunk tuned to 32hz. Running off of 2x saz-1500d's. ps. The 15 would have to be done sub up port back due to 13.5" of hight available. thanks =]

1 of my BL subs blew and ive been trying to get this all sorted out and sent in but thats a different story. i was wondering if i could still play the one that isnt blown. ive already taken the blown one out of the box. i dont plan on turning it up high at all. just enough so i can hear music. is that possible or is it risky?

Ok so this is what im getting Sub: Fi BTL 15 inch, All the options cept cooling cause i got p chamber (it said not to get cooling if you got that so i dont know lol) And its Daily Amp: ROCKFORD FOSGATE T1500-1BD (T15001BD) MONO 1500W POWER Series AMPLIFIER Component speakers: KICKER DS680.2 (DS6802) 6" x 8" 90W And a 1/0 gague wire and a Capacitor (ROCKFORD FOSGATE RFC10HB 10-Farad Digital Hybrid CAPACITOR w/ Digital Readout) Would this hit hard enough to shake the chit out of my van? And i know your going to tell me to get a battery but i just want something small and light and not take up so much room. So you cant talk me out of getting it lol.

hey guys im running to sundown saz1500ds strapped at 2 ohms, and 2 btl 18s dual 2s in my s10. i recently reconed. when i slam on them for a few minutes, one woofer gets hot real quick, the other gets warm. they both slap just as hard, but i cant figure out why the one woofer is getting hotter. i checked the tinsels where i soldered it looks good, same as the other one. all the connections are good as well, im using all 8awg wire. i set the gains using a multimeter and there gettin the right voltage the calculator gave me (3000w at 2 ohms - 77.5v) . i also swiched the woofers so the one getting hot was on the other side, and its still only that woofer getting obnormally wa…

Got my Q15D2 put in the truck yesterday..... heres the system: Pioneer Premeire P590IB Elevation Audio 6.5" coaxials in front doors (to be replaced tueday with Autotek MM6.5" components on Autotek MM75.4) Fi Q 15D2 Autotek MM1400.1 @ 1 ohm ~3.0cu ft tuned to something like 32-34Hz. pics later.. that sucker is loud.. sounds nice.. mmmmm how do i get a sticker? someone said it'd come with the sub but i didn't get one

Ok I have a 12" Fi Q and love it! So I was wondering if someone could point me to examples of full range or almost full range 6.5 round drivers for the back seats in the doors. Right now I have full range Pioneer drivers, but was wondering if getting something like AAs Poly Driver would improve the quality of the sound, or should I not bother. Somehow Fi is related to Ascendant Audio, not sure how though.. Thanks. Mike

Off the top I want to go ahead and thank anyone for any help they give since I am a new guy on here. I want to get some opinions from some people familiar with Fi before I change my current setup in my car which is a 2000 Toyota Solara. I am currently running two Soundstream T4 Tarantulas in a 4.5cu. box powered off of a US Amps MD2D (2004 model). I have an optima yellow top up front with an extra batery in back along with the Big3 and 0/1 gauge for power. Also have a seperate eq w/ 8 volt pre outs. The last time i metered it was at 141db. (42hz peak) I am planning on running 1 BTL 15" powered off 2 US Amps MD2Ds in a 4- 4.5 cu box tuned 30-32hz. I will also add another O…

I rarely see anyone running sealed on this forum. Since the Q is the only sub to run sealed, anyone with some more insight? Currently, i have a 12" kicker CVX in a 2.3cf @29hz box and I find it tuned too low for most of the music I listen to. I found someone to buy my sub/box for $200 so I'm gonna pickup a 15" Q and run it sealed. Space is a concern to me as well. I'm planning on making a box around 2.5cf after displacement and running it off my viper 1200.1 .. so 1200w @ 1 ohm. How does the Q sound sealed? I'm hoping for a slight output bump up as well as a much flatter response curve. I'm excited to go back sealed!