General Fi

dropped it to .5 ohm today and holy chit... only have the 2 videos that i made today with it at that load, this one and the one where my cd player is skipping all over the place. http://s204.photobucket.com/albums/bb197/1...nt=SNC10101.flv

i have a kicker zx1000.1 which is rated at 1258 watts at 2ohms. and i was wondering if this will be plenty of power for a daily setup with only the pole chamfer on the sub, o and i listen to rap 99% of the time, so im thinkin that this will be fine, and im also leaning a little more towards the spl side over sq im goin to bulid a box soon for it, it will be 4cu. ft. @ 32hz, dont know the exact dimensios but i will know soon thanks

I have a blown 19Ov.2 Is it possible to get a recone for this motor??? The VC is 2.5" I'd like to recone it down to a 12 or a 10 if possible. Thanks

Hey! What's the shipping weight for a Q 15"? Thanks

diagrams on how to build?

Everyone will find out shortly! Hopefully by the end of next week to be precise. Specs: (2) 12" Fi SSD's 4cf enclosure, braced and 45'd, 75+ sq inces of port tuned to 38hz Autotek 1900.1D should be close to 2.3k watts @ 14v, Hopefully around 1150 watts per sub. 2 YT G31's 220a HO alt 2 runs of 0/1 I have faith they will, we had 2 SSD's on a SAZ-1500 @ .5 ohm and they took it like a CHAMP. Don't worry, we will have pics and vids no matter what the outcome. If they blow, then I guess it will be time for another pair of BL's.

looks like 2 sets on the recone which have woven tinsels, which is awesome... but i have questions how to get them soldered... of course im not doing it my self.... just questions on it.

A buddy's Eclipse 10" has blown. It's this one if im not mistaken: LINK Can Fi do a recone on this? If he wanted it reconed to a 12 or 15 Im guessing he'd need a new basket?

I'm planning to buy two of the fully loaded Q15's, and I have a question regarding how to hook them up. When I get them I plan to hook them together either in series or parallel and (This is where the question comes in) run off a monoblock Rockford Fosgate t2500-1bdCP. Now since each requires 1000w rms would it be safe to run them at 1250 off of the 2500w monoblock? I plan to put them in a ported or bandpass style enclosure that'll take up most of my 43inx40inx17in (roughly) trunk. Would this be a good set up for the two woofers? And is that the correct power for them? Also, the second question I somehow forgot, how would I wire two dual 1 ohm Q15's to get them to hook up…

PM sent, waiting for reply

Fi Car Audio

So is FI going to be selling AA stuff on their website sometime in the future.

Hey guys, need s'more help once again . I got a price quote from somebody online about having a box built for 2 Fi Q 15's... I told him the dims I had to work with (40" deep, 19" high, 48" wide) and the tuning freq (32Hz) and he came out with the rest. Is this a good setup? 30" deep x 19" high x 28" wide 6.1 cu ft tuned to 32 hz w/88 sq in of port. Thanks

Went out to move my vehicle earlier(after bumping my bl 18") and noticed a car sitting in the road. I got in started it up and the car rolls forward and out pops a cop. He asks me if i was playing my music loudly earlier, and i told him I was. He skips right past the warning and asks me what i got, and i told him to shine his light in the window. He says holy chit and asked for the company name so i told him. He wrote all down on a notepad and told me what he had in his previous system ,and we bullchitted for a few mins and told me he would look into it and rolled off.

I need to downsize my 18 to a 15 or 12. I have 3-3.5 ft box max that I want to build. What is the process to obtain the kit, and how do it install it? Thanks Jim

I am wanting to replace my L7 10" in my 23ft Malibu boat. I have been running the L7 in a small sealed enclosure for most of the summer and been relatively happy. However I have been wanting more. I replaced the sealed box with a 1.6 cu slot ported box and gained a bit, but still I am wanting more. Issue in the boat is no cabin gain obviously and limited space for an enclosure. So this brings me to my question. Which 12" sub in the Fi lineup would be a good contender in the wide open environment that is a boat? I would like to keep the power requirements realistic. My current sub is powered off a MMATS 600.1 just for reference. Thanks for any advice.

So i ordered a sub for a buddy of mine for his birthday. Literally 24 hours later he impulse bought a sub himself from a friend of his. In short, I ordered a sub 24 hours ago, payment processed, order just got switched to awaiting fulfillment...so I know there are another 10-15 business days before the sub is built. I needed to cancel and refund this order ASAP so I dont end up with a sub for nobody. I have sent sales an email, but I have seen issues about response time. Has anyone had experience with refund/returns/cancellations? If so, how did you go about it?

I got my first BTL 18 about 5 months ago, fully loaded dual 2 ohm version. It was the fist 18 I'd purchased or even heard in person, so I was a bit skeptical because of the mixed things people say about larger drivers as far as quality go. The last two setups I had owned were a kicker L7 15 in 5cubes tuned around 32hz, and and alpine type-x 12 in 1.1cube tuned around 32hz. I had been trying to find a very loud woofer that still sounded half decent, and while the alpine sounded nice, and the kicker got loud, neither did both very well. The kicker was very loud though, so I was really trying to find something that could out-do it. When I started trying to find out about the…

So I've been bumping two American Bass XD 10's powered by a mmats 1400.1 amp. I think I just burned up one of the subs so I obviously want to replace. I want something louder. My system hit 153.2db and that's with two 10's. I like American Bass's products but the VFL's are 1500wrms each and I don't want to buy another amp. I'm looking at the Fi subs and specifically the IB3 12's. Anybody have them? They're 50wrms each more then XD's (500wrms each). The amps 1400wrms @ 1 ohm so I don't want anything that's more then 650wrms each. Reccomend another sub? Thanks =)

I am interested in having a couple of subs recones to 15's or 18's i would like a price quote for them if that's possible.... The first 2 subs are RE SX's TC9's and Hp3's Thamksa lot!!!!

i have a motor off of a sub that i blew....well creased and cracked the cone....i was told it was a tc9...but i want to make sure before i try and get a recone...but here are pics any help would be appreciated

OK so the other day I was showing off my BTL to some friends. Gain is set correctly with dmm, and about 10 seconds in to a song the sub makes a weird noise and then freezes. Well I am thinking I fried the sub and Ill need a recone kit, which made me upset to start with because I only gave it like 2400wrms. Well I take the sub out of the box and what do i find? Not a burnt coil. But a broken magnet on the motor. The magnet is litterally cracked and pushed in and caused the coil to scratch and get stuck. What would cause this? And how can I get it fixed. This sub was never abused.

Okay I just recieved my two 12" SSD with copper coils about a week ago. I purchased a very large sheet of mdf yestarday so I'm set with wood. I also just purchased a US AMPs XT4000D so I am also set on power. This is my first time building a box. I am going to be putting the box in the bed of my avalanche so I have a boat load of room. I was going to tune to about 32 or 33 Hz and do 2.5 cubes per sub. This box will be ported. If someone could provide me with diminsions that would be awesome!!! or even a plans. My friend who is going to be helping me build the box (he has experience building boxs) said he will help me. Thanks a lot if any of yall could help me!!!!!

I have a 91 S-10 Blazer 4dr... Right now I have a full JL Audio setup with a JL 300/4 powering my JL speakers and a JL 500/1 powering my 12W7 in a sealed box. Now I want to upgrade. I have a buddy with a single BL 12 which sounds good...but I think I want more than that. My problem is this, I want bass...lots of bass, like to the point that you turn on a bass track or a decent rap song and it's hard to breathe or swallow...lol...but I want it to sound decent (had a ground zero nuclear 15 once...bass was brutal but sounded like crap...) I know that you can't have SQ and SPL together... I want SQ, just SQ that moves you...lol. I listen to all types of music but mostly…