General Fi

Hopefully you guys can put a tracers/tracker or whatever on it....This is BS! I cant believe this. I shipped it to my work address since there's usually someone there all the time. My home....hardly anyone is around. I can't belive this. Scott, or whoever if you can verify SIGNATURES...I'd be glad to do a sig test. or whatever, but I didn't sign for that. I have called the store next door to me...Stuff (pawn shop) they dont have it....the other store next door to me is 7-11, and I have good relationships with both stores...So I have no fear of foul play yet. But this is aggravating....was hoping to have it this week...and I've been trying to get an answer from so…

Hello Scott I have been trying to get a hold of you for some time regarding a very large build/order. I understand you're a very busy man, but I also know spam filtering and things like that could have accidentally deleted the emails which I have sent you. If you have it, if you could get back to me whenever you have some free time that would be great. If you need me to send it again let me know. I appreciate the time. Thanks! Shane Munda Team Sundown

here's my setup. ive been procrastinating for a while on putting them on here so here you go~! heres box with none other than the btl 18's of course if you look closely you can see the 5/8" all-thread bracing through the top all the way through the port and through the box to the FRAME! just in case i get in a wreck http://i221.photobucket.com/albums/dd176/d...es07/system.jpg heres the amp that is for sale. check the for sale forum and pick it up! Rockford T20001bd 1 ohm stable and way underated on power. http://i221.photobucket.com/albums/dd176/d...07/100_0779.jpg heres the mercury mountaineer they are sitting in. it is also for sale! http://i221.photobucket.com/albums…

Hey guys. Just wanted to know whats yall opinion on this..Is this a good match? it will be in a 8 cuft box... At what frequency should i port it? i was thinking 32 - 33. i want it to be loud and low... will i turn heads with this set up? Thanks in advance

My system is going to be for daily driving , I have both my amps, both my subs, and my box is on the way. Ive heard alot of conflicting replies though about the amount of power im throwing to the BL's. They are RF1500's but the birth sheet rates them at about 1700, so pretty much each sub will get around that much if my electrical is good enough. My question is, will the loaded BL's be able to take this daily?

im wanting to get a 15'' BTL and i been researching them and i have seen a lot of comments on how the tinsel leads fry.. why do they do this?? will i be ok with 3,000 watts to my sub or will it eventually fry?

I am ordering 2 q's soon and need to wire it to a 2 ohm load so i would want the dual 1's or dual 2's?

Would i need to get the dual 1's or dual 2's to get a 1ohm load out of the amp and also how would i wire them to get the 1 ohm load http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=42 is that the right wiring even though it says its for 4 ohms? EDIT: if i were to get TWO of them

Yayyy...I cant wait to get. Any Idea on how long it would take to get it!? I am just so excited! Order I-10871/00 dated 11/09/2007

i know there are some busy times over there. just wondering when will Scott be available for answering emails. i wish to make some international orders to Israel. thanks

First off, hello, been lurking for awhile finally decided to post. I need some help. I want to add some subwoofers to my car. I am going to start with 1 sub, would like a 15, but possibly a 12. I have searched high and low to find something I truly like. First problem is, I have only heard 13w7's in the same car I have. I don't want to drop that much per speaker and I don't want something everyone else has. I have been leaning towards the 15"BL. Amps, I have access to kenwood KAC-9103D for cheap, but no sure I want that either, because I think I would have to have 2 to push the BL. I seriously doubt they come close to the 1800 watts they claim. No one around her…

This is a new project going in my friends Charger R/T. He wants to slowly setup a nice SQ setup. We will more than likely use the Q's. If doing an IB, the rear deck will be completly blocked off and sealed up. Any suggestions or ideas would be great....thanks.

Yea i got home last night and opened my newpresent from ups

Alright guys I'm new to SSA and Fi. I'm Ramin, i live in Cali. I'm paying my friend about 100 a week for a Bl 12" w/ cooling, a Nine.1 Amp, and a custom 2.4cuft box tuned to 32hz. (i'm paying 640 altogether) He had the setup for about 2 weeks, and now decided he's gonna get the bl 18. So he's selling me his new setup. Well firstly, is there anything i should change about that setup. I could for example sell that amp and get a new one. Secondly, i'm not the best with car audio. My friends help me with most of the installation etc. I know a decent amount though. The setup will be going in a 07 Audi A4, and a couple friends have been telling me that i'd need a new head unit …

i emailed you guys cause on 1 of my 18 btls the Terminal or Binding posts broke on 1 side and i needed a new one i also sent an email to sales@ficaraudio and got no reply i just need 1 of them can you give me a price

Hey guys, been awhile since I have been on here to pick your brains. I had my Charger SRT, got it set up nicely, and realized I really dislike cars so I sold it and got a F150, 4 door. Every truck I have had I put a fiberglass lid on the back and did a blowthrough going into the cab. I have always been happy with that, but could never haul anything. In keeping with a truck theme, I am planning on keeping the back open this time. To get a decent amount of bass I would like to rip out the back seat and put two individual seat in there and build a custom fiberglass console running up to the front seat, maybe a little further. So, have any of you tried this or heard a s…

Sign In for anyone checking out FI from elders to newbies or newbie elders like myself. Let us know if you work for FI any affiliation, have FI products, or what you want from FI Before I drop my own name I must give an elders first so I think the guy who earns that spot is Steave Meade and if you havn't checked out his site do it. www.*****.com Obviously he is an FI fan and Reppin that chit hard. My name is "Joe Rod" and I'll be ordering 418's in the next week or two. Havn't decided on the SSD's or BL's yet but they will be in a bandpass enclosure of an 88 S10 Blazer Let us know who else is out their …

well... I got a motor here (lmt motor) and it was sent to me unmagged.. can fi magnetize it for me? what would be the cost? dont need a recone or anything.. just this. thanks

I need a phone # to Fi, or someone that I can talk to about making me a custom sub. I have a 12" eclipse ti motor (tc 3hp), and I want to add a Q, BT, or, BTL top end to it. Anyone got a #. Thanks.

hey was wondering.. i have a btl coming to me in a trade with a fresh recone, but there is no basket.. can i purchase one through you guys? (18" 12 spoke, and a rubber gasket, and terminals) thanks!

I ordered a BL on the weekend, and got an answer on Sunday. I live in Canada so I can't order off the website. I ordered my sub(10" BL) and forgot to state the impedance. So in the email back he tells me what it'll cost, and asks me what impedance I want. This is Scott BTW. I tell him D1, because I was in a rush and completely blanked. Ever done that? I'm at work thinking "you cant wire d1 to 1 ohm..." kind of freaking out. I get home, email Scott, get an answer that says "we already started, but we'll just put the motor away for the next order. no problem." How SICK is that? C/S at it's pinnacle right there! The build will probably start next week while I'm of…

this guy offered to build me a box on another forum here are the specs 17"H x 42"W x 24"D, 8.174^3ft gross vol. Slot port, 15.5" x 5" x 15.92"Long@37Hz. After all displacement, 7.048^3ft net box vol. Built from 3/4"UL-MDF. Seams matched and double sealed. Reinforced baffle board. Dado cut end caps. Seams fastened with Tite Bond glue and 1-5/8" counter sunk drywall screws. Walls fully braced and tied in with Hardwood bracing for Zero wall flex. 45 degree boards in the corners to kill standing sound waves. Gold spring loaded binding post. Ports painted black. Gray Ozite carpet. it is going in a 04 ford explorer and my goal is SPL just wondering if this would work good…

ok im gonna be buying two 18 Fi bls and wondering if 4000 watts was too much for them. i know that Fi subs can take more than rated but is this too much?? they will hopefully be two U.S. AMPS MD 3Ds

Just givin some scores at the local competition the USACI put on at the NOPI Import Faceoff in Montgomery, Alabama yesterday. I took 1st in 1001-2000 modified with a 147.2. Metered in passenger kick panel sealed up. I did not like the placement of the mic due to the fact my system is geared towards the windshield!!!! I also took 1st in super port wars with a 162.8. Not bad scores with dead cells in my battery under hood. metering 11.5 volts in the back at 2200 rpm. Replacing battery tomorrow. I put my back yellowtop under hood today and metering 15.8v in the back. I'm running 2 18" btl's with 1 rockford t20001bd. I was placed in modified because my box was 2" above windo…

Can I get 4 ohm coils in the Q line? And would the 4 ohm sub have more bl?