General Fi

I have 2500 watts rms easily disposable at 1 ohm. I dont want anything bigger then 3cuft net for a box, 2 BL 10"s or 1 btl 12", whats the sq like? I have owned (2) 10w3v2s, 1 dd 3515, 4 dd 1508s,1 dd 9512, (1) 12w7, heard kicker didnt like it and heard other subs, I wana know what a bl and btl sound like Im temped to buy this setup. I know the btl 12 will handle 2500 watts but dunno about 10's and i heard the 10 btls are horrible for daily. Little more info this set up is.... trunk rear fire/ported in a jetta price not the problem I want LSQ... not farts not sq with no backing.... So comments?

Got a customer that is considering going with either a q10 or ssd 10. Customer mainly listens to rock, metal and other types of music along those lines. If i stick with the 1.5 cu.ft. net spec and tune alittle higher around 35-37 hz, how will that sound. Also, customer requirements is the sub has to be dual 2 ohm 1000 watts continous per what he stated. The vehicle is a1998 single cab Dodge Truck and the enclosure is replacing the center console with the both the sub and port firing back at the cab rear wall. Space from baffle to cab rear wall 6-8 inches. Phil Woodlawn Cabinetry

Finally after a few weeks of telling myself to buy it, I just did. I'm already way too anxious for this sub. It's going to be quite different from my last sub stage which was 4RE8's in a 6th order bandpass. Im going to be running this one at 2ohms off of an md2d. Right now I'm looking at running it a ported box of 4cuft at ~28 hz. Any other sugggestions? -Justin

i need 1 18" basket to recone my MT to an 18. shawn, since you're closest, if your around tampa one day, maybe i could get it from you? let me know how much one is either way, even including shipping to 33603.

I'm pretty stoked, I finally placed my order for my 15" Q dual 1 about five minutes ago, and I can't wait until it gets here. I've been hearing nothing but good things about Fi.

Well first of all let me say hello and its nice to be here second yes I am a distributor for steg but no I wont hawk my product unless asked for . Now to the issue at hand I am currently trying to get 2x12" fully loaded daily use bls with a power up (if possible) but iI know theat some of the guys are away competein unfortunatly my fabricator is coming in 2 weeks to finish of the car and buld the enclosure and I dont have my subs i have had a quote for the subs and the shipping but i can t seem to order them or do I just order them thru the website you see I live in australia and the postage is like 135 bucks each sub which is not that bad but will that be put on the bil…

Along the lines of the BL promo we finished building up the parts we had for the X series and will be offering them in pairs until they are gone (as a thanks to those that have helped us turn 1 year old). (2) 10" X series subs $150 shipped (2)12" X series subs $160 shipped We can offer deeper discounts for 5 or more subs as well. We built up about 200 12s and 150 10s from old motor stock (when we discontinued them at the beginning of the year) and will be blwing them out to make room for more current line products. To place an order, send an email to [email protected] for Credit/debit card transactions with your name, zipcode, phone number, as well as what you want t…

From today (10/18) through the end of the month (10/31 for those that cant remember ) if you buy a BL with the flatwind option you will receive the full cooling ($40) for free. All orders will be automatically upgraded. Just a little thanks to the forum and customers that have helped Fi make it through its first year. Thanks, Scott

when they coming out scott :P im sorry i had to, it was good seeing you and pol again, and nice meeting chris i hope you guys finish up his vehicle soon, did you guys get out of houston before the rain hit?

Does FI stock 2.5" coil re-cones? Specs on the coils? Might need a bunch of em

Posting for a friend..he's had his BTL for week....and we are both kinda curious how this happens and if there is any type of warrenty, figuring the VC is still 100% fine, the sub still plays and all. P.S. I can't seem to get a response from Scott....I still need a shim to align the gap and one screw to mount the basket to the motor (had to use an easy out on one of them).

Looking to find out what kind of options i have, trying to find 4 RE SX motors and re cone them to 18's, looking to find out pricing and what recone options i have. herd that the MT flat wound coils is a good choice but no idea where to find any.

i'm looking in to get getting 4 fi ssd 12's. i was wondering how much power i should put to them? is 4000 watts good enough?

Hey guys a while back i asked you all for advice and i recently got this build finally finished with. Just wanted to say thanks and check out the pics. Any comments or feedback would be great. Its a daily groundpounder and ive had this build done for a couple months now and i finally took some pics. I have 2 18in btls fully loaded, 4 ks65.2 4 ks5.25 2 zx2500.1 1 kx650.4 225amp Excessive Amperage alt. 4 yellow top batteries couple runs of 0gauge and some other stuff Any feedbacks or comments would be great guys, thanks.

World Finals West Coast, San Mateo, CA..... Fi donated some subs to raffle off this weekend and i made a little video of the lucky new owner of some nice SSD's....he was happy as hell to get them too http://www.stevemeadedesigns.com/videos/fiSSD.wmv Congrats! Enjoy bro!

Was tired driving home from finals, and about an hour or so away from home....swerved to avoid something that ran across the road (deer?), and rolled the focus at least 3-4 times. The winshield shattered and caved in, front half of the roof crunched, windows shattered, amps and batts were thrown from the trunk, and i guess scattered a good 20-30 feet from the car. I probably wouldnt be writing this if i had not had the wall built in the car, acted like a wooden roll cage....you'll see what I mean when/if i post pics. The car is completely totaled, not sure on teh condition of the speakers. Not sure how, but i was able to get out of the car with just a couple bruises and a…

.

can Fi recone a 12" Eclipse Ti to a 15"? not too sure what motors are on em

Here is Fi Car Audio Results at world finals in Florida Carlos Rodriguez took first place in Super Street 3-4 with a 166.9 Michael Hadden took second place in Super Street 3-4 with a 154.7 Tony Economou took first place in Bass Race - 130.0 To 139.9 with a 139.9 David Zolondek took third place in Bass Race - 130.0 To 139.9 with a 139.8 Team Boricuas Sin Miedo took forth place in Bass Race - 140.0 To 149.9 with a 148.0 Michael Hadden took forth place in Bass Race - 150.0 To 159.9 with a 152.8 And the Results for Fi car Audio in California Marcus Ferazzi first place in dB Drag Racing - Extreme 3-4 with 148.2 Results for Indianan Indianapolis Fi Car Audio Extreme Audio Fir…

i got tons of pics and vids......im exausted though so ill leave you guys with 2 quick teasers. Lets just say i had fun Man the BTL's held up so good.......slammin hard as HELL too!! oh ya, warning HOT chicks involved here http://www.stevemeadedesigns.com/videos/tremendous12.wmv http://www.stevemeadedesigns.com/videos/tremendous11.wmv enjoy, pics and vids all week........gotta go thru all of em

well tampa finals was a good time !! first off congrats to Carlos....on the USA & world titals !! all the Team FI guys.. great job !!! team FI was in the house forsure..!! had the best time hanging with all the FI guys !! that was the best part almost.. meeting fellow FI team mates..... all gretat guys !! i almost didnt want the weekend to end..... loved hanging and shootin the chit with all you guys.. cant wait to do it again.. well.... FI kicked ass !!! lil-john

here's a small vid since I never got around to it before http://s168.photobucket.com/albums/u175/ha...igherresvid.flv ok, I have no IDEA where to start, 1st I'd like to thank Scott and the guys at FI for helping me while in a helpless situation! OK, these weren't your average recone, they had to machine adapter plates to get the 12 spoke baskets even compatible with my motors because the bolt patterns aren't the same... they had to tap them so the 12 spoke basket could be screwed into the spacer/adapter and drill through holes so I could bolt the adapter to the top plate of my motors.... THEN, there was a mishap in shipping and the original recones/basket/parts and my FI…

had some little problem, scott and paul got everything fixed so fast it was unreal. you could not asked for a better company and for someone to stand behind his product like scott does thank you, scott did not know me at the time and i bought my subs used not from fi when i was playing my subs before i went up and paul saw something wrong he started working on it

This is my post from ca.com. i posted this over there and completely forgot to show love to the FI forum here . here it is though.

Ok I am new to the forums and hope this is the right spot to ask. If it is not...please point me in the right direction. Anyway I am interested in finding out what it would cost or if fi has any Re audio xxx 12" 2006 recone kits? I believe it is a Dual 2 ohm sub. Please let me know what i need to do to get one! thanks!