General Fi

Ok, here's my question..FI is obviously amazing. I want one!!! I'm driving a 99 Malibu and I want to put a 15"Q in. I'm trying to decide if it's worth it for me to build an ABC box, a standard ported box, or possibly a CRX box. I want clean and loud...don't care about the complexity of an ABC as I find it fun. My only problem is that I deisng an ABC box at 3.5cu ft, 30 hz tune, with 50 sq in of port area. I'm not sure if taht's enough port area. I will be powering the sub with an MTX 6500d. Any help would be great!!!

Ok so im getting one 15 BL with a sundown saz-1500 should i get dual1 or 2 i want to run the amp at 1 ohms

i know there are some busy times over there. just wondering when will Scott be available for answering emails. i wish to make some international orders to Israel. thanks

Hi everybody, I'm planning on reconing from 12 to 18's. But I'm a little confused, the subs are BL 12 D2 PC. The problem I'm having is the wire looks to be flatwind, I had taken pictures because the coil does not say FW. Also the shipping info does not say Flatwind, infact next to flatwind it says no...Help!! Thank you.

i have a maximum of 42" wide x 12" high x 19.25" deep i can use keeping everything else stock. The amps will be mounted on top of the box but an extra Kinetik battery in the back WILL take up some of this box room. After some calculations, i came up with 2.8-3.0cuft NET after displacements for the 2 following setups- 3 10" Fi Qs SEALED off of 4,000w or... 2 10" Fi BLs PORTED at 34hz off of 3,000w I wish i could do 12s but i do not think subs and port up would sound good. PS- i dont have room to do 12s unless i aim them up and can only do them if i port up as well...i have no boxes to test how that would sound either...)

How much space do you need between the box and subwoofer? I have 6.25" deep box and i really want a pair of ssd's but with a mounting depth of 6" i want to make sure that ventilation and performance wont suffer.thanks-Dave.

I have emailed fi many times about getting a recone and they would email me once or twice but never give me a price. I have a 15" BTL fully loaded with the 1 slug motor and need a recone quote for a 18" basket and recone shipped to 73110.

Got a BTL 18'' and not sure where to make it face. Should i make it face the roof or make it face the back?

I'm hooking up 2 12" q subs and ddnt know if I only needed to hook up one side of the subs or bridge to both of the terminals?

My friend just picked up two of these beefy lookin subs and I am gettin ready to order my FI's. Where would these sit in the FI lineup. I was guessin between Q and SSD, not to sure though.

Got my Q15D2 put in the truck yesterday..... heres the system: Pioneer Premeire P590IB Elevation Audio 6.5" coaxials in front doors (to be replaced tueday with Autotek MM6.5" components on Autotek MM75.4) Fi Q 15D2 Autotek MM1400.1 @ 1 ohm ~3.0cu ft tuned to something like 32-34Hz. pics later.. that sucker is loud.. sounds nice.. mmmmm how do i get a sticker? someone said it'd come with the sub but i didn't get one

I ordered a 2 ohm DVC sub but I need a 1 ohm DVC sub. My invoice # I-17666/00. I sent an email, but I know it takes a couple days to read them and I placed the order 2 days ago. I hope I'm lucky and it's still early enough to change. I apologize for my stupidity :/

I'm currently running an eD SQ10 in a tiny sealed stealth enclosure (see this thread in the eD forums for pictures) in the rear hatch of my Scion xA. It sounds ok but I'm looking for something a bit louder and lower. I'm considering replacing the hatch floor with 3/4" MDF and going with a 12" IB3 I should have just enough clearance for it. But, I've searched the forums and haven't seen any mention of the IB3. I'd probably pick up the SVC 2ohm version and put about 500 watts to it from a bridged Boston GT-22. Thanks in advance for any input. E

sorry for the waste of your time

I got 2 15" Fi Bl's with P chamfer, cooling, flatwind coil. I wanna recone them to 18"s. What would be the price for 2 18" recones with P chamfer, cooling, flatwind coil and 2 18" baskets and whatever else would be needed

its been two weeks since my friends sub was ordered and he hasnt recieved any information on it yet. I tried to send you a PM scott but your inbox is full XD sub is for: Brian McClain dont feel like indulging this forum to address so if you need any more information PM me. I'm pretty sure it was a Q and i told him its probably from you being out of town earlier this month. Any reply is appreciated.

Hey guys I need some fast help......Through a friend of a friend I know somebody selling a fully loaded btl 15" 1 ohm......only problem is I want to put it in a 2002 cavalier trunk and I am not sure it will fit. It does not come with a box right now so I will have to have one made....my question should I even bother buying the sub? Is there any chance of being able to make this beast fit lol.....I know I should go get my trunk measurements but its late and dark were I live so I will have to get that tomorrow. Thanks a lot for any help anyone can give

3 15 bl fully loaded on 4k fosgate watts would this do a hair trick in a nice box

im looking to purchase either 2 BL 18's or 2 MTX T9515-44 15's im not sure what amp to get, iwas thinkin on going with autotek but ive heard people say they aint very stable, if not one of those, what would be a good amp to run those subs?

This is my first system. I'm not sure how many speakers to get to compliment my subwoofers. I was thinking four 6 1/2" component speakers for the doors (amplified of course). Is this enough or will the subwoofers over power the mids/highs? The speakers are Rockford Fosgate Power T1652-S.

Description:I recently got a 15" SSD. So far it is great, and sounding better and better since the cone is starting to be able to flex more. I am very happy with the system. My girlfriend usually doesn't like bass, but says this one (system) sounds good, so props to the guys at Fi for making that possible! Here is a picture of my system as it sits in my car. Enclosure design: For my enclosure I built a box tuned to 33hz, and it came out to 3/5 cubes. It is 35x15.5x21. Here are the plans I used: http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0 And a diagram I followed: I always though black ports look much nicer with black subs, so decided to go that route. O…

Just ordered myself (2) 15 btls fully loaded...for once in my life I'm actually feelin patient becauase I have a strong feeling that its well worth the wait...my main concern though is if they are on back order do I still expect 3-7 business days for production or may I find myself waiting awhile? Also (2) RF T2000.1bds will be powering them...btl÷T200=good couple? (Birth certificates are both 2800s at 1 ohm) thanks!

Hi, i own a 15" dual 2 BL running off a xtr2400 old school orion amp. ATM i'm running 1200watts(4ohms) to my 15. I recently owned a xtr1000, which ran 1000watts at 1ohm to my 15(which is why i have the dual 2 setup, and im an idiot for not getting universal option). But anyways now that i own this beastly amp, i would like to get the most out of it. I am thinking of buying another dual 2 15 BL and being able to wire it to 2ohms OR selling(craigslist) my 15 and buying a new 15 BTL dual 1 of course. To sums things up, what would be better output, loudness, slammin' balls wise: 2 15 BL'S or 1 15 BTL. And im sorta on a money budget right now... Greatly appreciate yalls thoug…

will banana plugs fit in the push terminal on the bl's

I need a recone and basket for a AudioQue SD2.5 Can Fi do this? Thanks