General Fi

I'm currently running an eD SQ10 in a tiny sealed stealth enclosure (see this thread in the eD forums for pictures) in the rear hatch of my Scion xA. It sounds ok but I'm looking for something a bit louder and lower. I'm considering replacing the hatch floor with 3/4" MDF and going with a 12" IB3 I should have just enough clearance for it. But, I've searched the forums and haven't seen any mention of the IB3. I'd probably pick up the SVC 2ohm version and put about 500 watts to it from a bridged Boston GT-22. Thanks in advance for any input. E

please search your emails... Ive been waiting for 1.5 weeks now for a reply... I will resend one more time OEM work from [email protected]

i was wondering if you have had a chance to look at my 10 q sent in for lead wires

what's up with the email system? sometimes i'll be going back and forth with scott, and suddenly i stop getting replies. I emailed June 1st, June 9th, June 11th, 14th. Still got nothing. It's happened a couple times already..

I am hoping that scott or nick can help me with this...i sent an e-mail and i know you guys are busy, but i have not gotten a response yet so i'll reort to the forum again... i need a dust cap...the outer one...i have my speaker reassembled and this is the last piece of the puzzle...i was wondering if i could buy one preferable a blank one....is this at all possible scott or nick? thanks for the time

sorry for the waste of your time

heres a vid i took of an RE rep (other brands too) that was in town and wanted to hear the Hoe for himself. I drove him around the block when i met up with him at lunch yesterday. Its just a short clip that wasnt really good enough for the video page.....was good enough for youtube though

Hey guys I need some fast help......Through a friend of a friend I know somebody selling a fully loaded btl 15" 1 ohm......only problem is I want to put it in a 2002 cavalier trunk and I am not sure it will fit. It does not come with a box right now so I will have to have one made....my question should I even bother buying the sub? Is there any chance of being able to make this beast fit lol.....I know I should go get my trunk measurements but its late and dark were I live so I will have to get that tomorrow. Thanks a lot for any help anyone can give

3 15 bl fully loaded on 4k fosgate watts would this do a hair trick in a nice box

Hey guys, been awhile since I have been on here to pick your brains. I had my Charger SRT, got it set up nicely, and realized I really dislike cars so I sold it and got a F150, 4 door. Every truck I have had I put a fiberglass lid on the back and did a blowthrough going into the cab. I have always been happy with that, but could never haul anything. In keeping with a truck theme, I am planning on keeping the back open this time. To get a decent amount of bass I would like to rip out the back seat and put two individual seat in there and build a custom fiberglass console running up to the front seat, maybe a little further. So, have any of you tried this or heard a s…

This is my first system. I'm not sure how many speakers to get to compliment my subwoofers. I was thinking four 6 1/2" component speakers for the doors (amplified of course). Is this enough or will the subwoofers over power the mids/highs? The speakers are Rockford Fosgate Power T1652-S.

Just ordered myself (2) 15 btls fully loaded...for once in my life I'm actually feelin patient becauase I have a strong feeling that its well worth the wait...my main concern though is if they are on back order do I still expect 3-7 business days for production or may I find myself waiting awhile? Also (2) RF T2000.1bds will be powering them...btl÷T200=good couple? (Birth certificates are both 2800s at 1 ohm) thanks!

Hi, i own a 15" dual 2 BL running off a xtr2400 old school orion amp. ATM i'm running 1200watts(4ohms) to my 15. I recently owned a xtr1000, which ran 1000watts at 1ohm to my 15(which is why i have the dual 2 setup, and im an idiot for not getting universal option). But anyways now that i own this beastly amp, i would like to get the most out of it. I am thinking of buying another dual 2 15 BL and being able to wire it to 2ohms OR selling(craigslist) my 15 and buying a new 15 BTL dual 1 of course. To sums things up, what would be better output, loudness, slammin' balls wise: 2 15 BL'S or 1 15 BTL. And im sorta on a money budget right now... Greatly appreciate yalls thoug…

No the sub isnt playing yet, i only have 2. The other 2 get here monday and i WILL make a vid of them moving........this is just a video perspective of what they look like instead of the pics i posted. It looks bigger in the video i think. Anyway its a little something i tossed together so you can see another view of it.

I have a fi bl 18 dual 2 fully loaded. Just wondering what amps u guys run on urs and can they be made to sound decent in a really well built box?

Like the title says, I was wondering if there are pumping losses or air noise exiting from the cooling channels or the like thanks. Just to be clear, I'm only curious about bp power option only, let's just say the sub was inverted for reference.

i need help on desiding between a 15 inch fi bl or the si mag d2 its going in te trunk of a mustang 01 in a custom ported box and a HIFONICS BXi1206D amp so i never heard nether of theese subs so i need som opinons on which you think you be better for the amp and car and of corse witch sounds the best

Here is a photography project I did titled "Speakers of Nature." The idea was that the speakers I use in my car have been applied to nature to contrast the uncanny replication of sound that speakers can make to that of something so natural sounding that you would never have known it to be replicated in the first place. Anyways, that was the idea and from there I used everyday tools that just about every car audio enthusiast has to create this project. I will post the pictures in order from cover to cover. Thanks for looking! Ps. Sorry for the quality of the images but I didn't want anyone copying my work. But feel free to use my ideas, just don't claim it as …

i want o ask some questions about Fi Car Audio

I am trying to send my sub into you guys for a recone, and assuming I should ship it to the general address. I can't get a hold of anyone at your company to verify that this is the address that I should ship my sub to for a recone, and I don't want to blindly ship it out to an address without getting confirmation from you guys. Please let me know, thank you! PS - For anyone that might bring it up, I already spoke with Nick via email and they are expecting my sub once I pay, but I can't pay or do anything yet without a shipping address.

Is there somewhere i can get a tracking number for my sub i ordered like 4 days ago?

2 10" SSD's off of 1200 watts, any benefit to adding BP power to them besides that i could add more power later? would it make the subs to stiff? would they not be as loud? would the add'ed cooling and spider make the sub's last longer? thank you for your time and, i hit 142.* with my 15" Q in a 2.8 cuft aero port box. it makes me happy wile sounding great. *bad white boy dance*

are ported boxes ok for rock music too? i have the room an would like the extra output from my ssd 12. but mostly listen to rock. could i tune it higher or lower an be good? or should i just go sealed. an be plenty loud enough with sundown 1000 at 1 ohm. any opiniones,help? appreciated

I have an 89 Mercury Tracer, I have 7.7 cubic ft (internal volume) {39 in W, 23 in H, 18 in D} I would like the box to be tuned to about 32 HZ. I will be running about 3500 watts to the sub. any help would be appreciated, I do not know that much about tuning an enclosure.

1 of my BL subs blew and ive been trying to get this all sorted out and sent in but thats a different story. i was wondering if i could still play the one that isnt blown. ive already taken the blown one out of the box. i dont plan on turning it up high at all. just enough so i can hear music. is that possible or is it risky?