General Fi

would an ssd with only coppercoil be happy with 500rms or should i give it more. planning on getting 2 but dont want to have to upgrade electrical system.

Hi i was wondering if somebody know the pecifications of a fully loaded btl 18?? im getting ready to build a box for it but fi has taking the old btl out of the website and i know the pecs, does anybody knows them thanks.

Well, I planned on doing a 3cuft box ported to 33hz in my lincoln ls. As usual I have read a lot about the sub before purchasing it, and in several different locations it has said that i should use the flatwind coil option, however in different locations i have also read just the opposite, it said that i should use the "stock" copper coil for a ported enclosure... i figured i would be able to get the best advice here and the most accurate information. Also what about the cooling option? I have nothing against buying a decent amp, i would get a BL or something but the SSD is a great daily and i drive an hour to work and a hour home so i need a daily lol... If i need to f…

Is this a good combo, I chose PDX because I currently have it, I also have a sound processor for it to adjust the bass because the pdx doesn't have one =/. I am getting rid of my 1243d Type X. Also it is going to be in the Type X box at 2.0 ft^3, 33-36hz, 1.82 net. Is that good?

I have a sundown 1500 that I will be getting soon, but I am trying to decide if I should go with the Sundown and a 15" BL fully loaded or if I should buy 1 10" BL fully loaded and wait probably 8 months for another sundown and BL 10". So can anyone tell me what the 10" BL sounds like, i have never heard a 1700 Watt 10" sub before...

I've been trying to get in touch with Scott because myself and my partner Josh will be out in Vegas for CES and we would like to view your facility and talk about some possibilities with him. If at all possible could you please forward my info along to Scott, or PM me a better way to contact him I would greatly appreciate it Ryan Meleg 330-606-0474 Boulder Acoustics email [email protected] (our server is down so please use this personal address)

Just purchased a 15" D2 Q Can't wait!

Just wondering what I would get if I order the xxx recone kit? I was planning on getting a basket as well. Does it come with the gasket, terminals, screws, etc? Just want to know what I need besides glue.

Hey all im new here and have been eyeballing a fi btl 12 for a while now and would like to get yalls opinion on what all options to go with, my scenario will be just for listening to, no competitions just a daily sub, any opinions or comments would be great, and what about amps? i am currently running a 12 l7 in a 2.0 cubic ft ported box at 32 htz with a power accoustik amp have had this set up for bout 2 years and no problem, but i have heard people put down there amps alot....opinions or comments? THANKS!!! …

OK im going to buy some Fi sub's..im thinking abut getting 1 BTL 18" with P Chamfer, Cooling, HiXmCoil, Daily and I Heat Ring...or 2 SSD 18"s with FlatwindCoil and CopperCoil upgrad's...both combo's will be used up to spec like Rms watt's , Ported box cuft, Hz and so on...iv never heard these sub's in person so im not sheer whats better or i should say whats louder or hits harder...what ever you want yo call it...Thanks billy!!!

I know you rarley check this, so it's kinda for Scott and Nick too. But could you PM me your #, I would like to head up there Monday and I know you rarley check the forum lol.

amp RF T30001bd sub 1 18" BTL Fully Loaded Enclosure? I dont want to go to big while giving it this much power. Should i do 6 or 7cu ft I was thinking 7cubes with around 90sqin of port?

I was wondering what options I should do and what Ohm sub I should get. Each sub will be connected to a Kicker Kx2500.1 Thanks in advance,

of sound deadening do you think it will take me to do the whole trunk and spare tire well of my 06 cadillac cts?

I've sent my sub in to get reconed over a month ago and on n the 2nd of this month I sent an email wondering the status on my sub and when it should be shipping. All I'm wanting is an update or status of my sub because I have not gotten any response since the 2nd and I have sent 2 more emails since then and still no reply. I've seen many other posts about how Fi is always busy and they'll respond, but I need a little more communication than this. Order number is #1259 Thanks.

okay guys, i am fairly new to the whole subwoofer thing and i need a bit of help getting myself started. First off, i need to know the differences between duals (1) (2) (4). My friend is helping me with most of this, and he tells me that i need subwoofers that come in a dual 4 ohm coil so he can wire them up to 1 ohm. I am planning on getting 2 12" Subwoofers, either Soundsplinters rl-p in a dual 4 ohm (if i knew what that meant) or the Fi Q's, but i'm having a hard time figuring out if they can be wired up to 1 ohm. Whether i get the rl-p's or q's they will be both placed in the same exact sealed enclosure, and will be wired to an elemental designs amp that is running 12…

Ok, I got home this morning to see a sticker from the fedex guy because no one was home. Do you guys know if they ship UPS or fedex? Im trying to figure it out before I drive 20 miles to the fedex warehouse lol. Thanks

Hey I'm just wondering when you guys swithced from one big magnet to 4 pie shapped magnet like on the new RE XXX's? Is thier any increase in power handling, and is thier anything internaly diff with them? Can they be ran with another new BTL that has the old style single magnet? Heres some pics not my sub I seen it on another forum. I remember some subs having pie shapped wedges between the basket and motor was that the cooling before and you switched to this or was that just a spacer for more excursion because some times i seen them on them and some times i dont.

So i have been reading on and on about different organizations and competitions and am tired, so I thought I would just ask and see if someone knows. Is there a category that I will be competing in with the following setup. This is in a cut through of a truck with a camper shell. 4 18" BTLs in a wall 2 amps, 1 for each set of BTLs other amps for mids and highs As I said, I am tired of reading. The few times I thought i figured out that i could compete in a certain event there was a little note saying a truck with a cuthrough was not allowed. are there any where a truck cut through is allowed?? THANKS

i was wondering if anyone knows what option meade has on his 18" btl's. dual one or dual two ohm, spl or daily? thanks!

Two (2) Questions: 1) Is the Fi websie the only place you can buy Fi Subs? 2) If am supplying 2000 watts (Hifonics BXi2008D) to (2) 15 SSD, would it be better to inculde the flatwind or the copper coil feather on these subs? Thanks

how do i upload a pic of my sub on here all i get are http things and its on my computer ?? is there a special way i dont know about??

I emailed you guys about getting a recone done for a older style 12" BTL sub. I needed a broken lead tinsel fixed and the dustcap replaced but Nick said that you guys were going to do a full recone anyways. Nick was emailing back for a couple of emails and then he just stopped without giving me a price quote or address to send the sub and how to pay for it. I have emailed every email associated with Fi already. Nick email me back please. my email is [email protected]. I don't know if your spam filter had put my email in the spam folder or what but I have not heard back from you since. I have checked my spam folder and inbox and no new emails from Fi. Thanks. Phi

What new speakers are coming out? It has been saying new lines coming soon for quit awhile now.

wasilla alaska 99654