Fi Products

I am now in the market for an amp that goes great with the Q12 I want a mainly Sq system, but still with some hard bass to enchance the sound, I am using all stock speakers and power, I have a 2007 honda accord v6 EX-L, I have been looking at the Memphis 16-1000.1 , but if there is another amp the will suite this sub MUCH better for +/- $75, please let me know? I have heard that the memphis is a a very good and solid amp, but I want to see what else in on the market. thanks C

doing a wall with 3 15" inch BTLs total box volume internal is 15.5 cubic feet how do i figure out the rec port area with 12-16 sq inches of port per cubic foot? really lost here i keep coming out with really high numbers

I just bought two Fi X 12's. I'm in the process of designing my box and i realize that i don't have the displacement of the speaker itself, recommened sealed cuft, or recommened ported cuft. But i have the other specs: X12 D4 Fs 25.7 Hz Re 3.9 Ohm sper coil Qms 4.01 Qes .38 Qts .35 Mms 120g Cms 3.2mm/N Sd 480 cm^2 Vas 104.1 l SPL 88.6 dB 1W/1m BL 20.0 N/A Xmax 16mm RMS 300W Can anyone help me on this one? Thanks!!!

i am gonna be getting an re mt 18 and i was wondering if anyone could tell me if i could a btl made that would perform the same as an mt 18? i just want to know i the two different subs would sound good in the same enclosure

I've got 3000 watts to play with, and am leaning towards either 2 15" BL's or 2 15" BTL's...which would be the better way to go?? And if i order them tommorrow how long would it take to receive? the only option i'm getting is the p chamfer.

A quick question i am wondering. It says the BL is between the Q and BTL. How is this? Is it more of a SPL sub than the Q? How is the sound quality of the BL? I can't figure out what I wanna go with. I love SPL, so am thinking the BL. I want BTL's but don't know if I wanna drop all the money for electrical upgrades. I know I will have some with the BL, but not sure. Also, I heard the BTLs can actually sound good SQ wise considering they are SPL subs, is this true????

Pics of my sub http://i161.photobucket.com/albums/t203/wynold/DSC01038.jpg http://i161.photobucket.com/albums/t203/wynold/DSC01055.jpg http://i161.photobucket.com/albums/t203/wynold/DSC01058.jpg Here is some teaser pics of my enclosure. Its a 3.65 cu.ft tuned to 34hz. http://i161.photobucket.com/albums/t203/wynold/DSC01214.jpg http://i161.photobucket.com/albums/t203/wynold/DSC01212.jpg http://i161.photobucket.com/albums/t203/wynold/DSC01213.jpg http://i161.photobucket.com/albums/t203/wynold/DSC01215.jpg more pics tommorow and review will follow soon.

I just realised that the Q was using new basket like these: http://www.soundsolutionsaudio.com/forum/i...?showtopic=8565 and also there is no logo on the cone itself. Well I prefer the good old looks though. Does this effect all the sub as well?

Im lookin to get 2 12" subs. I want them to be really loud . Will the SSD's be loud and shake my whole car and hurt my ears if i turn it up all the way or do in need the BL's. I would give the subs 1000 watts a piece.

I just wanted to post up some pics of me from my trip to Kuwait towers. See the OT thread for all of em.

Well im sure a few guys on her have probably seen my thread on car audio and had a good chuckle at some of my planning tools lol..anyhow after months of planning im just going ahead with the design i have and buy the sub. the worst that happens is it doesnt sound great in which case i wall it off or sell it. http://www.caraudio.com/forum/showthread.php?t=218554 anyways, i was wondering if i need the flatwind coil option. the options i have right now are dual 2 ohm, universal, cooling, and its daily. i will be doing bass race and my amp is a power acoustik a2400db. also, i will be ordering it today sometime so any help is appreciated and how much will shipping to T1S 1C4 …

I want to make sure of this so i know what kind of amps to buy. Are Fi's subs rated before or after impedance rise? This is very important. Giving examples- Audiobahn Eternal rated at 900wrms Audioque HD3 rated at 1000wrms I ran 1 eternal off of a 1250wrms amp and partially damaged it with a test tone for 42seconds with 100% clean signal reading from oscilloscope. the power it was ACTUALLY receiving - 334w! Conclusion - Audiobahn rated this sub before rise. I ran 1 Audioque off of a 2,500w amp and i ran test tones, bass tracks, clipped songs(intentionally) and never damaged the sub. The power it was ACTUALLY receiving - 1,413w. Conclusion - Audioque rated this sub aft…

Would the Hifonics 1606D be good to push 2 12" SSD's or do i need to get the 2006D. Ive heard that Hifonics overates their amps is that true.

I wanted to post a link for all those that were interested in seeing my build log. It's here on SSA, and obviously in the build log forum I hope you enjoy :cool32:

Just wondering & by looking at the specs the SSD 12" seems to be a good candidate for a IB setup in trunk vehicle.So what is FI's thoughts?

Can i get any good front speakers that i can run off of my headunit or do i need an amp.

Hey guys. My first post, so be easy... I just bought a '90 CRX and need some wang for it. I just upgraded to a 160amp alternator and I'm in the process of upgrading the big 3 to 1/0. I have a hifonics BXI1606D and have built a typical CRX box (29 x 29 x 14) with 4 - 4" x 17" aeroports out the back. I have 2 kicker s12L5's that I was going to use, but I just can't get the 18 BL out of my head! I would want it configured as a daily driver, dual 2's, and with the cooling option (which includes the P Chamfer) and Flatwind. Now for the questions: Would the 18 BL work in that box (5.47 cu/ft tuned to 36.5 Hz, if my calculations are correct)? If so, Should I go with a BXI20…

What is the difference between dual 1 and dual 2 ohm. I am planning on getting 2 12" SSD subs. What would be some good amps to get.

what would i put up higher number on tl on using a zx1500.1 im guessing the bl bc its closer to its rms ,and the btl's rms is a little more then what the amp will be giving it. thnx guys sorry to ask noob questions but you guys are specialists with your subs and not me so i trust you. thnx mike

Review of 15” Fi Q After many moths of research I decided to buy an Fi Q. 1) Budget – Fi is extremely reasonably priced, they charge what the price should be, they don’t have an inflated MSRP price to start with 2) Quality – You cannot really beat the quality of an Fi subwoofer, it’s built to last and to perform its best. 3) Sound – What can I say, best sounding subwoofer I have heard in my life, the Fi Q really surprised me. I wanted a subwoofer to get loud and sound great, the box that was designed targeted that and the Q 15 took on the challenge and really surprised me. 4) Customer Support – THE BEST. I recently had a problem with my wiring which caused the sub not to…

i know dual 2 can be wired to 1 ohm, but i need a 2 ohms load on a zx1500.1...im guessing i need the dual 1 correct?thnx guys i appreciate it. mike

i have a pair of fully loaded btl 15s powered by 2 memphis 4kw's. i have entered many db drags and bass races with these sub. in bass race i am in the 149 class with 148.9 db. after 30 seconds of bassrace, i can smell the woofers a bit. then i let it cool and do another run and it smells bit agian. at every comp i am in the lanes 4-5 times for bassrace and 4-5 times burping. but never has the sub died on me. this thing is solid as a rock. scott you are the best. i just thought i'd share my feelings about the btl with everyone else.

i have a 96 nissan ext cab pick-up truck and will start buying everything i need shortly. just have some questions first, what would be some good amps to push these. i want about 2kw-2.5 per sub. second would i be best with a fiberglass cover or camper shell for a wall? third what kind of electrical would i need? (batteries,big three?,alternator?) or would i be just as good with the bl series? also trying to save as much as i can but need everything ne also. thanks in advance

well i have a soundstream3500d and i'm looking for new subs. which subs would work best with my amp? 4 12"ssd fully loaded or 2 bl 18's fully loaded or 2 q 18's fully loaded? my main goal is for daily setup but i go to a car audio show.