Fi Technical

so i hear ia is coming out with a 21" subwoofer. should i expect fi to come out with just as big or bigger in the near future? Damon

I just ordered a 15 bl today and im still pondering on what size box to get..do i go for a 3.0 cub box or a 4.0 cub box any help would be greatly appreciated

I ordered my btl a few days ago (fully loaded) and now it's time to buy an amp, what do you guys think of soundstream? The sub will be going in a 5 cuft pored box tuned to 32 hz Not trying to spend more than 500

Ok so here's the deal. This is my wall design for my two 18in. fully loaded btls that will be running 3000rms a piece. I have never done a wall build before so I'm hoping i somewhat got it. EVERYTHING is double baffled 3/4in. mdf . In the 1st picture showing the front plate it looks double baffled its only supposed to be single " which i just fixed and im to lazy to take and upload another picture" due to the fact that there will be another front vanity plate to go around the curves in the car all nice and snugly. The box is , 15.7341 ft³ BEFORE DISPLACEMENT 15.2141 ft* after sub displacement displacement port is 6 inches in height width is 29.224 in…

I bought two bl off cl an want to make them fullyloaded. On the order site for fi they list a 08 an 09 model. Since I'm not the orginal owner an don't know if they are the 08 or 09 how can I figure out what they are. Does it really matter can someone tell me the differences between the two. Thanks guys an gals

so i was on my way to work and i was subbing as usual..when i got the scent of like something burning..i really dont have the slighest idea of what it is but i can only compare it to like plastic burning..i noticed it only smelled when the bass is hitting low notes..so i get to work..8 hrs later..im leaving work and start subbing again, it plays about 10 seconds of the song and the sub goes out! and this was about 1 hour ago..so im pissed! i have no idea whats going on..everything is working fine except the sub..all lights indicate everything is good..do i need to recone it?? im not very knowledgeable with these audio systems! please help! this is my set up 1 18" fi btl 1…

i need help choosing between these two designs for my 12" BL. my last box didnt turn out so well. so i was hoping you guys can maybe help me out a bit. amp:hifonics bxi 1606d goal:spl first design: H:14.25" L:30.5" W:18.25" port width: 3" total port length: 29.75 square port area: 38.25 box volume:2.9 cu ft (before double baffle) tuned to:34hz second design: H:14.5" L:30.5" W:14.25" port width:2.5" total port length:31" square port area:32.5" box volume:2.18 cu ft (before double baffle) tuned to 36hz any input is appreciated, thanks.

Buddy of mine has 2 bl 18's ran off 1 sundown 2500d, he has them in slot port now in about 12.5 cubes gross. They sound decent, but dont really have the lows, and its tuned to 32hz. He wants new box with 4 6" aeros's in about 16 cubes net tuned to 32hz. How does this sound for size? I ran 2 bl 18's about 2 years ago off 2 sundown 1500d's in about 18 cubes net with slot port and they pounded the lows, and sounded perfect. I just havent done any builds with aero ports.

with 2K RMS should i go with a BL or a BTL ??? i hear most people run their BTL at like 4k rms or 3k rms and i would rather run a BTL if it wont be vastly underpowered....i was reading on the forum and i think it was tejcurrent who ran 2 18" BTL's off of 2 hifonics 2K RMS amps and hit right below 151. so if i ran 2k to a Bl would it get just as loud as 2k on a BTL ?

hey whats up guys just got my box built from this guy that has built them for me before and never had a problem but this one just looks not right so i need help from you guys....the deminsions are....width is 48" height is 22" depth is 31.50 port hole is 3.75 x 22 port length is 27.75 and it is supposed to be tuned at 32hrtz...does this sound right or do i need to have him redo it thanks if i forgot something let me know thanks again

Just wondering,im planning my build and want to use 2 RFT4000.1s.Will that be to much or should i go with the RF2000.1?I want one amp per sub.

alright for about 2 months now i have been breakin in my 15 inch bls...... so can i feed them more power now?? or should i stay the same?

Alright, I have a MTX Thunder 2150 and MTX 7000 12 in sealed pre-fab as a temporary setup in my 08 extended cab Sierra. Signal is off stock Bose HU rear driver speaker on a LOC. Needless to say I want a bit more oomph along w/ a my passenger seat back. Also, I believe I'm getting a full signal there but if someone knows otherwise please let me know. So I am willing to give up my rear center seat space, and am looking to do a small box behind the center console rather than downfiring under a seat. I am thinking a FI SSD 10 combined w/ a used MMATS, or possibly a new American Bass amp around 1000 to 1250 rms (and yes, I'll consider a used Sundown). Want to keep it US made b…

I have a BL 15 dual 2 ohm wired to 1 ohm. How would I find the resistance? On the specs page it says it is 1.5 ohms, but since I have it wired to 1 ohm would it be different? I am kind of lost as to what my target voltage should be. Sorry I am just starting in the car audio scene so pardon my noob question

I need to know what kind of re cone i can get for this blown RE Audio HC Quad Coil or if i can even get one.. i would like to make it a dual 2 or something wondering what series you think it would stand up to with the FI's i mean this HC is tripple stacked magnet but i dont think its a BTL... i could be wrong thou. Let me know thanks Jesse..

I took the plunge and bout a BL 12 with Cooling, Flatwind, and Internal Leads. It will be powered with a MB Quart MB Quart Q1.1500D giving it 1500w RMS @ 1ohm. I now need to design a box that will fit in my trunk. The cutout that they have listed on the forum might work in my trunk but I would like to design one myself. I was thinking somewhere between the 2-2.5cuft (after sub and port displacement) and a slotted port tuned to 32Hz. It seems that every online calculator gives different results or has a cuft value that is crazy high. I was wondering what the actual formulas are for finding port length given the port area and desired port tuning? and any other formulas /…

it was making a popping sound a few days ago. then yesterday it happened the coil broke from the cone. im going to try in glue it back witch glue should i use ?

??? Thanks

Bought a new Fi Q 12 and i was wondering if you guys could help me out with the enclosure, i have a hatchback its a golf with Cdt es-520 with upstage up front and cl-61a in the rear powered by a Directed 1100d5 and strapped to 600d for 1200watts @ 2ohm for the sub. i listen to wide range of music but mostly reggae, hip-hop, r&b, rap, pop, and some classics. My goal is sound quality but i would also like it to be loud at the same time without sacrificing sound quality and with that said would a sealed or ported enclosure best suit my hatchback. Thanks guys!!!

I didn't take into account where I was going to put my amp when designing this box (which is going to take up my ENTIRE trunk...so I had to pull one of the walls in slightly and that brought me down to only 4.7 cubes net after port and sub displacement...is that too small? Will I see any adverse affects?

Hello all. I am currently running my 10" Fi ssd woofer in custom built ported box (sub up/port back). I love it! I have a kid on the way and would like to switch to a smaller sealed box for more space. I have a couple of questions: 1. Can purchase a prefab box that meets the recommened specs? 2. What size would be optimal? .6-1 cubic feet is what is recommended but would it be better to stay on the .6 side or the 1 cubic foot side? Thank you in advance...

Ok So box build is going nicely so far. Im working 16 hour days cause well im greedy and i soak up whatever over time is avalible..So iv slowed down a little bit... I hit a 140.4 with a sine wave... I then hit a 139.9 with music... Is this just because I didnt burp it? It seems as though the Sine wave and the Music are way to close.. Im just curious is all and would like to know before I go and re meter with the new box...

i have had 2 10" ssd for almost 2 weeks and the duscap one one of the subs has come unglued. Has anyone else had this problem? i know i could just re glue it but this shouldnt happen after 2 weeks and i havent been beating on them either, i emailed fi but anyone else have any suggestions, i know about CA glue but im not sure what i should do, any help would be great. Thanks

Thinking about going with SP4 15 inch subs. Anyone can help with how many cubes I should build too and how many inches of port? Will be running them on about 6K of power. Thanks

ok here is my question can i run 2 amps (mtx tc4001) on a Fi q 12? the amps are rms 600x1 at 2 ohms. i know that the FI's are dual 2 ohm. right now i dont have the cash to buy the amp i want(sundown). the other mtx amp should be here soon but until then can i only run one VC? is that safe? any answers would be nice? my friend has one of the FI Q 12 in his 06 Z71 and man it sounds great... i want that sound