Subwoofers / Speakers

What would be a good amp for 2 kicker cvr 2001? Sealed box stock electrical

I have a 1997 tahoe and i'm looking to set my system up by summer. my question is should i do 2 audioque sdc 2.5 15's or 1 fi q 18'' sub? and amp choices will either be a audioque 1200d or a sundown 1200d. i mostly listen to hip hop if this helps and want mostly lows with some flex over ""SQL"".

Have any of you guys heard them? How do they sound in terms of SQ or are they just geared towards getting loud? I read some reviews but they were from ppl that are running them. I wanted to get a larger unbias populations opinion. Thanks

so i have been researching subwoofers for a few weeks know and have finally narrowed it down to ehiter the fosgate power 1 series 12" or the fi ssd 12" both are priced fairly. i really would like other peoples opion on these two subs thanks. also which one has a smaller mounting depth that is one of my main factors of choosing.

Well, This Might Determine The Choice For My Dad's Truck. If Anyone Can Inform Me If The AA Havoc Has The Sandwiched Tinsel Leads Also, That'd Be Great.

Hi guys I need a good speaker I was recommended to Fi. So far with this kind of upgrade I'm goin to be upgradin the power and ground cable but right now I'm workin with (head unit - panasonic cq-c7401u, Amp - Alpine mrp-m1000, Box - Single 12' ported mtx Sledgehammer, Thinkin it's 1.8 to 2.0 cubic feet I'm not sure Havn't used box yet so I don't even know what it's gonna sound like) I do have a 1 Farad Rockford cap but I Havnt used cause It's pointless till I upgrade alt and big 3 which I have never done but will be doing first thing after I order speaker. Now my guy told me to check out the Fi Q 12'. I'm liking what I see but I'm not totally sure I know exactly How t…

misposting sorry look at other post thank you

exactly what the title says. digital designs 9500 vs fi btl. who wins in an output competition? not who can take more wattage. which gets louder on a given amount of power? say 2k watts or something.

Hey I was wondering where and how can i get a recone in Australia for my IXL 12", as i blew it up a couple of days ago?? do you guys stock the IXL v.1 parts and do i have to send it to you guys to recone it, or because i actually bought it from Affordable Drivers (Distributor In Aus) can i send it to them to recone it if they have the parts?? or if they dont have the parts and you guys do, can you send the parts to them and they can recone it? or even can Digital Designs recone it for me with the right parts provided by either you guys or Affordable Drivers because Digital Designs are pretty major in Aus and they do recones here for their drivers so they'd know how to fix…

i have looked, but cannot find the DC build log with the four 10"s and three aero ports, and a viewing window, it had a custoum port plug in the center port, does any one know who this was? thanks chop

rattlebox317 scored this for me, any one have any input on what would be a cool enclosure for it? sorry for the shitty pics fellas, tell santa get me a new camera. lol chop

so while i was looking at how much RE componets would cost i found a site that offers RE speakers. 6x9" 6" 6.5". so my question is would the RE speakers keep up better with 4 15" ssds then the kappas would? would be using the zxi-6410 to power them. the kappas i was looking at would be the 6"x9" 3 way, 6-1/2" 3-way, 5-1/4" 2-way. (one pair of each) if i decide to go with RE it would be the RE Audio (Resonant Engineering) RE 6x9 FR 6"x9" Full-Range Speakers looks like a 3way, 6" 2 way, 6.5" 2 way. (one pair of each) the price seems to be low compared to the kappa's but i know RE has a great name with audio. i was going to order the speakers at the end of the month. s…

Has anyone used these subs and if so what size ported enclosure have you guys been building for them i have talked to a couple different shops and have gotten several different answers but none of them are close to the same i have made my mind up that these are the subs that i am goign to use bu ti jus tneed to know what size ported box to build for them I really dont want to waste wood ecperimenting with different boxes and how much power have people been using on them I have also have heard several different answers on that as well some ahve said they put aton of power to them and some say be conservative if anyone had any info please let me know.

I need a recone on a 12" Audiobahn aw1206t, and I have now idea on how to go about getting this done. From what I've heard, Audiobahn has gone out of out of business. So does anyone know what I need to do about getting this recone done? Or should I just trash it and buy a new sub?

What would be a good box for three re srx 10's in back of bench seat on a 2000 f250 or can build to

When will these be available again?

I've been researching some different subs that are priced around 100 to 150$. and i've been looking into the audioque sdc2.5 series ( as the title says ). I'm looking for a daily sub that can take a beating all day at rms and i wont have to worry about it. ( obviously right amp settings, etc ) I was thinking about either a wall in my explorer with 4 15's ( clamshell type box) or do a crx style box with 4 12's. I have more then enough room for both cause i have all of behind the back seat. demensions are like 52 wide 40ish deep and 40ish tall (estimations i dont remember the exact from when i last measured) Sq is important but i would like to compete locally and hopefully …

trying to figure out which setup would be better. either 4 Planet Audio TQ150DVC 15" dual 4-ohm TORQ subwoofers on an Audioque 2200D in a sealed box with 2 cu ft per sub. or 1 MA Audio MA1800XL 18" dual 4-Ohm subwoofer on an Audioque 2200D in a round port box tuned to 32hz with 5 cu ft for the sub. setup would be in the trunk of a 2nd gen Altima. sound i'm looking for is really loud deep bass, the kind that vibrates the air in your lungs (or as close to that as i can get ). electrical upgrades will be done (big 3, 0 ga, etc). i hope this is enough information for you all to help. thanks.

I just purchased an Fi BL 10in dual 2ohm sub from Fi. My amp is an Hifonics Brutus 1208 with 4 guage wiring. i hooked the sub up yesterday at a 1ohm load, turned the amp around a quarter of the way up and listened for a little while. It started having a cracking sound like the voice coil was cracking but it dosen't do it at low volumes just around half way up which isn't loud at all also my deck is stock at the moment. Please give me advice on what the problem might be dealer fault or mine.

Box for IA 187 15" I used the RE box calculator and i got this: width-28" height-21.5" bottom depth-18" top depth-18" Port height-20" Port width-3" port lenght 1-14.25 port lenght 2-9" total port lenght-28.5" Port diameter-8.74 square port area-60" Port volume internal-1710 volume displaced-1726.875 box volume-4.061ft3 frequency-33.76 cut sheet bottom-28x18 top-28x18 left -17.25x20x17.25x20 right-16.5x20 16.5x20 back-28x20 front-24.25x20 port L1-13.5x20 13.5x20 port L2-9x20 cut angle-90 These dimensions seem wrong to me. wouldn't the left and right be the same could someone please explain this for me? am i just slow or is this wrong? thanks alot.

Well I have an old body style s10, 3kRMS, and 15.64cubes of volume. Not really sure what to do for the port but I was thinking of a 4"port spanning 44" across the top of the box. or one flared center port being 5x36 and tuning about 32hz... let me know what you guys think

I'm looking for a decent sub that i could possibly find on the internet for cheap with no warranty or anything. This sub is temporary so i'm not concerned about the sub blowing in a short amount of time; i just need it to last until this summer. I'm concidering buying 2 kicker cvr 12's...they are like $80 a piece...does anyone know of a sub that would be better around the same price range maybe $20-$50 more expensive btw i have a box that is like 2.5 cubic feet per chamber and the port is tuned to 33 hz according to an online tuning calculator

hi guys, i would like to ask for some options to look at. need some inputs here, what sub would be good for a .5 - .6 enclosure / 200-500rms / decent lows / good SQ, sounds good even for metal, rap, hiphop, etc. ( so something with a little SPL on it)? so far only things i see are PG RSDc 10", RE SR 10", and RE REx 10" do i have any other options on this? good price would be around $200 and highs on $300 for a pair. so $100 - $150 each...

I have existing mid-bass speakers in my car's front doors and I want to reuse the space without modifying the doors. The existing speakers are 160mm units. I doubt I could modify my doors and have a result that looks acceptable. The MLI-65s will almost fit. The depth is tight but will work. The problem is that the mounting flange is too large for the door panel. If I use the MLI-65 I will need to cut 5mm off of one side of the speaker's mounting flange to provide enough clearance to mount the door panel. It looks like there is a bit more than 6mm of flange width where the mounting holes are drilled through the flange. Does anyone have any advice or experience to sha…

whats a good amps for 3 10 inch re srx series any ideas in a sealed enclosure