Subwoofers / Speakers

Set up for so far is Pioneer 9800 headunit, Sundown 100.4 amp, Morel Supremo Tweeter. Looking for a great mid driver now. I have looked at the morel ovations, seas, and the focal. Any suggestions? Budget = around 500 - 600. i just want a great speaker with amazing midrange and a solid midbass.

like the topic says i need some recommendations for a new box for my maw15. right now i have it sealed at 2.2cuft. after displacements, and while it sounds nice, just dissapointed with the output. was hoping to like it sealed as i like the flatter response of sealed boxes little more than ported, but after awhile of listening to it i'm starting to find myself turning off the radio cause i'm a little pissed:( hu settings are fine, amps fine but it's the response i'm getting that's letting me down. problem i'm getting into is around 90% of songs on any given cd (rap/hip-hop) i put in has like no response at all, then others will just slam. don't get it, same cd's will play …

I have a 1994 Toyota 4runner and I want to upgrade my speakers, mainly for highs, but for mids also. I'm eventually going to get some 8's or something for mids and upgrade in that area. I have a Fi Bl 15 and a Sun Audio SAZ 1000d on order. My car has 4" standard speaker mounts in the dash, but none in the doors. I have a Pioneer DEH-P5000 head unit installed and some crappy 4" speakers that are almost blown. I could probably fab some mounts for some larger speakers, but if possible I want to stay with some 4" in the dash. Any input on some quality speakers that I could get for under $100 a pair would be great.

hey. i am having problems deciding what would be the best choice for a system would be... i know that i want to be pushing no less than 2.5k watts rms. i was thinkin one Fi Btl 18 fully loaded, but everyone is telling me they are way overrated. i have seen multiple videos of btl's tearin cars apart. if i do decide to go with this sub what amp and box should i get. it's going in a 1999 jeep grand cherokee and don't plan on folding the backseats down. please help me! thanks

I am looking for a 12" sub. Kinda on a budget. Willing to spend about 220 per sub. I just want the BEST bang for my buck. What do you guys suggest? Thanks

ok so i have a ten inch re audio sx sub d2 and an usamps md1d at one ohm the amp will do 1200 watts just exactly how do i get it to do one ohm do i just wire the sub up differently cause in the manual for the sub it shows how to wire it up parrallel is that it or what?

Will have the bench seats all the way up. Am lookin for two tens or two twelvea ported not sure if twelves will fit. Look at fi bl alpine type rs or sa. Please help money isnt an issue

I built a sub box as big as i could to hold two 18's in my acura cl.i run a 1200w hifonics brutus and it slams.But the speakers supostu have 6cft of air .the box only has 6.4 total inside air space. Is there any way to make the subs work easyer.By adding polyfill ,porting,or any other methed.i dont want to build a real intriqet box considering my trunk only holds about 13cft and my box should have 12cft.Any help would be appreciated.

New to site and need some help with sub choice. I just bought a '08 Silverado Crew Cab with a SubThump single 12" sealed box and currently has a Kenwood KFC-W3012 in it and I am definitely not happy with it. I have a hair less than 6.75" of mounting depth and .95 air space before sub and it doesnt have any filler but could get some if need be. To power it i have a 600w Infinity Ref mono block. I also have ID CTX65 Components and a Pioneer 4200dvd deck and listen to everything....I would say rock and rap more than anything else. I am more into SQ but want something that can hit low and fast and sound great doing it. Budget wise I would like to stay under $300. So.....wh…

I plan on getting a saz-1500D and running an extra battery. My only problem is I cant really decide what sub(s) I want to go with. I want a loud daily sub(s). I can make about a 6 cubic feet box. I can go with two 15s sealed, one 15 ported, two 12s ported, or possibly three 12s ported or sealed.. Some of the subs i have thought about are two RE audio SE 12's, two Fi SSDs 12s, One FI Bl 15, and I am open to any recomendations.

I have a Mazda excab truck. I have alpine r 6.5 in front with dynomat and 5x7 r in the rear, powered by a pdx 4.100. Just purched a pdx 1.600 for subs need to know what you guys think. I listen to mostly older rock alittle country and very little hip hop. Help please.

Alright guys I'm a total noob when it comes to wiring stuff. This is my first system and I want it done right! Let me tell ya'll what I got. I have Rockford Fosgate 5 and 1/4s all the way around with an Alpine MRV 300 powering them. I just got my Crescendo S1500 to power my Sundown X 12. I also have a Kinetik HC 1200. I have to splice the 0g wire I have going to my amp and run it to my second battery so I got a 0g splicer. I have to go and pick up some 0g ring terminals so I can solder them to the 0g. From there I'm pretty freaking lost right about now! I'm lost as to how to wire my dual 4ohm down to 2ohm. Any help or expertise would be awesome. Thanks guys.

Looking to get good sounding 6x8's for my 2004 mountaineer like to spend around $150 a pair.... I have a SAZ1500 and an RE audio MX15 factory 6x8's is not cutting it... Ideas please

Ok guys, I am going to do my best to describe my setup and goals for my next system. Please help if you have had experience with any of these subs! Right now I am running: 2007 Chrysler 300C 1- Fi Q15 4 cubes tuned to 30 hz. Cadence iA7 Optima Battery Big 3 I really like my Q but I want something LOUDER. I am willing to sacrifice some SQ for SPL. I miss my head splitting bass!!! However I DO NOT want to rid of the low end output that i love so much. Im sure any of these subs will sound good enough to suit my needs... that being said which one will be the loudest and still low on approx 1200w RMS power and i will make a new ported box to suit any subs need. I will be repla…

So my system was stolen out of our mini van but the left the 7" touch screen, it was all old stuff been saving this year to replace it next summer anyways. But I got sick of not having any bass so I got 2 Phoenix Gold QX 12" for $20 off a friend and I picked up a Phoenix Gold QX180.2 and Phoenix Gold ZX350 for $65. The 180.2 will run my kappa (witch are running off the deck right now) in the front door and the ZX350 will run the 2 12" @ 2 ohms. Now my question is, if I would build a box for each 12" would it sound the same as one box for both 12"? The reason I want to build 2 boxes and not one, is I'm planing on putting one box on each side of the van and build a amp r…

I bought 3 10" Fi subs but never could find what model mines were and im just curious to know. All i know is that they are Fi subwoofers.

I need to decide on the speakers that will handle the top end of the audio spectrum. Here is what I have; my 18" Q with the BP option on a sundown 1500, the L8's from HAT will handle the mid, I have an older 4 chan v12 alpine, that should work, and if not... which will relaly piss me off... I'll need to get another 4chan, or 2, 2chan amps. I think the alpine gets about 45-65 per chan if I remember correctly, but I also seam to remember the rating was a good deal under actual benched amounts from when other people tested them. I don't really have a budget, but I honestly wasn't in the mood to pay what the L1 pro's cost even with the 25% off. I just had my doubts about th…

i am looking to get my system started and i am looking for a idea for a amp for 2 12inch xcons... please help... u can email me would be nice at [email protected] thanks for the help

So, I've finally been able to get my hands on a Mag. I've a 12" Mag claw basket coming to me as we type ( ) My problem is that I can't find any spec's online for her. Does anyone know off hand? Thanks for any help... -Nick

As the topic title reads I need info on ID horns. I have 2 sets of horns. Both sets are full size. I have had minimal results searching for info on these horns. One set came with the install and tuning instructions. What I am looking for is the correct crossover freq. for these sets, power ratings, and the advantages of one set over the other. I did find this link for what I beleive is the V-2 version PDF but the driver in the second set of pictures does not match the driver in the PDF. Any info or input you can provide is appreciated. 1st set-Beleived to be CD1E-V1 2nd set-Paper work that came with it states-CD1E-V.2

I'm buying 2 JBL GTO1502D (15") and I went on their website to see a box layout. But I don't really want to do that. Anyone have any ideas or sites maybe I could see a dual box layout. Someone told me I should do enclosed no vents, but I think I might need vents. A bit of help please? Either a site that shows me a build blueprint for dual 15" or a site I could buy dual enclosed box, cheap? regards, timinsk

Just got my GCON 12" am running a decent set of BA components up front and I now notice a gaping hole in midbass The GCON gets lower than I expected and the BA's are super crisp and clean on the highs but what can I use to fill the midbass? I am looking at the PWX or NeoPro 8" or 6.5"...which should I go with? I was leaning toward the PWX because of the price but I will only have around 100RMS to work with and the PWX are rated 200RMS! Will they sound good with 100RMS? any other suggestions, or is the NeoPro my best bet?

OK I have one of the last old style 08' FI BL's......yes it shakes my car get lots of window flex yada yada I WANT MORE! SO I was thinking about getting another Nine.1 and strapping them together giving me bout 2800 wrms @ 2 ohms and getting another BL 15, but my question is, Do ya think I will be OK with mixing a new fully loaded BL with the old Fully loaded BL...are they that much different from each other?? any input is appreciated

I want moar midbass on my front. Currently I have the Alpine SPX177A powered by RF T4004. I was thinking of going for a pair of 8" for my mids. Can anyone recommend me a pair for under $200 - 250. Also it can be 7" as long as it can play low and has good midbass. I have 2 15Q on my subs and when I play full tilt, all I can hear is rattle and no mids. Thanks

im building a transmision line box for a 15 D2. for theie/small parameters it my progrm apears to want FD Re Lvc Bl SD Vad Qed Qmd Qtd