Subwoofers / Speakers

I have been learning of some new brands as I have been on here. Let me rephrase, I have learned of brands I have never even heard of before. So in this light I thought maybe peps would give a shout out to all the quality brands they have ever had or heard of because I fell so left out, here in the sticks.

RE MT15 + Kicker ZX2500.1 @1.4ohms + 4.5cubes @33hz w/ 90 in^2 of port = wangage? Keep in mind I have 125 sq. feet of SecondSkin Damplifier applied on my truck, including near 3 layers on the roof, the back wall, and the side walls... and two on the doors. Too bad it didn't get the part of my bed flexing like it did the back window... it's crazy worse in person ... It's pretty sick in the truck, I'm pretty confident it's the loudest daily 1sub setup in the Tri-State... but who cares... Without further ado... http://realmofexcursion.com/videos/REAudio/mt15.8.wmv nG

So i blew my morel supremo's.. 440$. Nice. Anyway what other tweeters are out there that sound great but are cheaper. I was on madisound and was looking at other morel drivers. The tweeters are so much cheaper then what i paid for these supremo's. I still want to get them but they are expensive and now i am questioning if they are worth it. Any tweeter recommendations would be appreciated. I am running a pioneer 9800 headunit off a sundown 100.4 amp. My mids are SEA excel's.

which brand do you think is better in subs Kicker or MTX.

I'm going to be buying (4) 6.5 inch midbass drivers and I'm looking at either the Kicker SS6.5s or the Mach5 Audio 6.5 midbass. They will be actively crossed at 60hz up @24db and 200hz down @12db. They will be getting 75watts rms each and run free-air in the stock door locations of my '04 Dodge Durango. Any thoughts...other suggestions. Either way I go it will only cost me about $150 and that's the range I would like to stay around.

Okay so, On Saturday or Tomorrow Rather I am purchasing a Driver. Now Which One I get is up in the air. I have narrowed it down to Four different Drivers. Here they are. Eclipse SW7200 Rockford Fosgate P312D2 Mach5 Maw-15 AA Arsenal Series 12"D4 All of these are around the some Rms output, 500. I am getting two of whatever I choose, but since I burn my money quick I am getting one now and one next week. That will also give me the time to get a Hands on look on what kind of room Im going to need. So.... It's down to those Four. The Final Four Contestants. Who Will Fall, Who Will Survive, Who.... Will..... Win........ umm sorry A little too much Movie Previews. Thanx in adv…

for those of u that have an older magnum that need recones, are we helpless with it?

I ahve a ford explorer 96, which im going to put 1, 15" mag d2 in for now and then another one later after the rest of the install stuff is done, has any one ever stopped using the filler rear speakers? Im planning on puting two sets of comps in the front and a 4" comp set in the panels where the roll bar is, so the back is useless? would this sound ok?

is there ANY vids whatsoever of the evil subs in action? i wana see!

I'm getting an enclosure and I haven't seen it yet, but the dimensions I gave were 48x14x?? I want to bolt it to the floor of my car, but I just realized I have a bolt to loosen the spare in the way... the enclosure would cover it. Is there anyway to bolt it on brackets or something to raise it off the floor, so I can gain access to the bolt, while still securing it? Any good ideas? Heres the cut in the rug for the bolt. (It's the U shape in the rug)

What is the displacement of this sub? I heard .40 cubes others are saying .15

hey guys. ive been working on a install all day, building a new box that will it in the back of my trucks (im taking the back seats out) http://memimage.cardomain.com/member_image...512_12_full.jpg thats the whole pic. to the very right is the amp rack ( having mounted them all yet). the middle you see with the holes cut out will have dresser like drawers in them by tmo. and the big hole to the right is about 4 cubic feet worth of spcace where i will mount a 15 in sealed sub someday. (magnum of course) http://memimage.cardomain.com/member_image...512_13_full.jpg thats my bro standing on the slider for an amp. this thing is build like damn tank. all 3/4 inch plywood with a…

plan on running about 7500 watts on 1 zcon 15

Any reccomendations?

Warning. . . . didnt have a burnt smell on anything just quit workin. . . . when i took it out the cone was still soft an the tinsels still intact. . . i took a 9v battery an did a coil test an nothing no movement or sound or anything i dont what could have happen any help is greatly thanked. . . an i was wondering if scott will see this post an if my sub can be replaced or anything

Same motor and soft part assembly. The difference is cone size and basket. Same amount of power is applied and the same size/tuning enclosure. What I am noticing in winISD is that the two 15" are more efficient and the four 12" have a less than 3db higher output. Is it fair to say that the output difference between four 12" and two 15" are negligible with same power and enclosure? FYI I compared four 12" xcons and two 15" xcons in 8^3ft tubed to 32hz. I also compared four 15" xcons and two 18" xcons in 15^3ft tuned to 32hz. The 15" & 18" comparison gave the same results as mentioned above.

Im looking for a sub to replace a 10" IDQV2. I will be running it off a JL 500/1. I like the specs on the Fi SSD and the SSA Icon but dont really see a huge diff between the 2, other than getting the copper coil and BP Power (whatever that is..) on the SSD. Can someone please tell me what BP Power is. I searched but didnt find a clear answer.

Anyone be able to give me an idea of what this enclosure may be tuned to?? I have a picture and a sketch with the measurements I took. The bottom right drawing is the port. It is shaped like an L, and above that I was trying to show that it is 16" in height. Any help would be great. Just trying to get a rough idea of what this enclosure is all about. It a "Turbo Vent" enclosure, could not find anything on the internet about them.

Just looking through some websites dreaming about a future midbass/fullrange setup and happened across these speakers http://www.parts-express.com/pe/showdetl.cfm?Partnumber=297-210 I was just curious if anyone has any experience/opinions on these and if they would be realistic in a SQ type setup. Chances are I won't be upgrading my system any time soon but these caught my eye and at 12 bucks, I might order some just for the heck of it. Thoughts? Alex

http://www.partsexpress.com/pe/showdetl.cf...tnumber=299-665 go to this link and look at the thing. It looks like a D2 15, with a different basket. IMPOSTERS Steve

I am currently in the middle of my box build. I will post the full build later. The box is 16" wide x 28" tall x 25" deep. The sub and port are up. It will live in between the back seats in a 2008 Tundra. Powered by a 3000.1 Taramps. I have two baffles and a "beauty" panel cut. My question is do I need to use the double baffle if I properly glue the "beauty" panel to the baffle or can I go with a single baffle the "beauty" panel? Just wondering If I can save a little bit of height and still be safe and solid enough. Thanks for the help. Here is my box design.

okay i was thinking about getting rid of my 6.5" SLC comp set for a pair of these. http://www.creativesound.ca/index.html it says flat 65hz - 20khz. its gona take up a lot less space in my car, and im prolly gonna fiber these and port them to 62hz or so to bring up that midbass freq. will this actually play down to 65hz? 80 even?

range around $500 for amp and both sets of speakers well i got stock 6x9s in front was thinking about changing them out with 6.5 components heard 6x9s aren't to good any opinions and in the back i got 6.5 and want to upgrade to 6.5 coaxil for subs i am installing 3 sa8 right now its in the build stage and pushing them with sae1200 wired up to 1.33 ohms any suggestions on what brands/amp 6.5 vs 6x9s was looking at polk audio db651 for back and db6501 for components up front thanks kevin

i have two hifonics brz1200 i dont know if i should get two 12" digital designs 2500 or 3500 series i would get each sub d2 and wire each sub at 1ohm to its own amp my max box dimensions are 38W X 15H X 22D i want subs + port firing foward, no sealed

Fi BTL 15 inches VS RE XXX 15 inches Here is a simulation in winisd...Which clear shows XXX will be louder... Box specs...5 Cu.ft with a port of 48 sq in and 20 inch length.