Subwoofers / Speakers

What do you guys think I should use for a single good 4x6 in the dash I would use peerless but they don

i have a MB Quart dsc4125 4 channel amp that i want to bridge down to 2 channels to run my ID XS65 components. off my head unit i have 2 sets of rca, one set for the "Front" and one set for the "rear" my question is how do i get the signal to be stereo and not mono? i hooked up the rca's like i normally would.. i put the "front" rca's on channels 1 + 2 and the "rear" rca's on channels 3+4, i switched my amp to 2 channel mode, turned it on and the signal was mono (i could tell because i used a song that usually has the left speaker playing in the beginning, but both were playing) how do i plug in my rca's to make the signal stereo again while still being bridged?

i have a ab400.1 and i have dd1008a and a dd1510 that im going to recone to 15's.im going to pick up 2 more dd 1515's soon.i was wondering if my ab 400.1 is to much power for 4 dd 1515s4? im going to use this setup for daily use and comp use. this setup will be going in a 1991 ford explorer.

Which do you feel would be best? I have a Crescendo BC3500D to power it.

recently just got my hands on four of these guys for 40 bucks was wondering if anyone knew anything about them? found they want .75 ported but id like to do something fun with them, 4th order bp maybe for the hell of it?

i have been researching alot on these 2 subs just dont know which is best for my plan. my plan is to do a budget minded spl/daily system my goal is to do a 150 under 1000 dollars on subs/amps/and batts now my question is 1) do iahve enough space for 4 15's i have a 98 chevy silverado extended cab 2) which sub is better for my application

4 maw10's in a single cab chevy running off an ED nine.1. Does that sound like a good setup to you guys?

Has anyone done a wall or anything with 4 mj 18's yet? im kinda curious if anyone has and what type of box they decided to go with. Figure with the 3 for 4 deal someone must have put 4 in a van or suv!

Im planning on putting 4 mj 18's in the back of my dodge caravan, . im not looking for big numbers i just want some kick you the nuts kind of bass... the question is if i fire the subs down with maybe 3-6 inches of clearance from the floor of the van how bad would it be? also if i were to do that any suggestions on what way i should be facing the port? i want to fire them down so they are A) more hidden ( i live in a REALLY bad area) and B) i still need to use the back of the van... any help or input i would be greatful for

Guys i need help alot of it I think im sold on 4 mj 18s the price is great and i wanna make ppls jaws drop when they see it I have a 92 caprice wagon 47x40x21" to work with (i cant go a lil more than 40 if needed i want to keep my spare tire in the back) Okay First how can i do it I was gonna run 14 cubes in a clamshell design tuned to 28 hz or just doing sub up port back what would the best option i was realy set on the clam shell i like having the subs face me Like a wall Let me know thans

Hi. I am building a box for 4 of the MJ-18's. They will be used for home theater and music. So I think im going with 4.5 cubic feet each and tuned to 30hz. Should each subwoofer have its own chamber or should they all be together. If they are together how many ports should I use and what dimensions should they be. Thanks alot!

2 10'' lethal injections 2 10'' Sound Splinter RL-i 2 10'' Cerwin-Vega Vmax 2 10'' kicker l7s Now i would be able to build the recomended box for all. Also i will be using a 2000 watt (max) dhd amp, it could be lowered if need be. Which would be best for spl purposes? thanks for your time!

New here and looking for opinoins. I was running 2 ME12's sealed at 1.25 on a saz-1500d in my extended cab Dakota, I'm now driving a GTI and plan to make some upgrades. I'm looking for more low end output, not nesicerially more output over all. I need to stay in the 4cf net area with good SQ, why I typically run sealed. So I'm looking at cone area. 2 15's are the winner in cone area by about 1 10's worth of cone, on the other hand I can get a real good deal on the 4 10's, about $200 less and have the same if not more power handling ability if I need it. So is that extra cone area gonna just kill the 10's? I can be about .8cf over the recomended size on hte 10's but righ…

Like the title says. I'm ready to buy my next set of subs and had my heart set on 1 zcon 15. But for the same price as 1 zcon, I can get 4 Re audio se 15's in a nice box still under warrenty. I have the power for them and the room. So what do u all think??

Hello, this would be my first go with a sundown product and I wanted to see any users opinions on the idea. The sub woofers will be receiving power from a mmats 2000.1 so the subs in theory not accounting for freq. or box rise etc. would get 500 per. The enclosure will be sealed shooting for a little bit higher Q around .8 as I like the warmer sound. I'm not a huge fan of dampened or critically dampened sealed boxes. Basically I am at an impasse as it would seem with the current sale it would be stupid to miss out on the SA's as I could potentially up grade power later on these vs the SD. Any thoughts, I know basically no one has played with the SD's but opinions would be…

I have a decision to make my choice is ether 4 SA-15s or 2 18" Z's. I have a Tahoe but I'm keeping my second row seat. I will power the subs with 2 crescendo 2k's(1 for now). My overall goal is to eventually hit around 145-147 on music and maybe 150 burb( I care more about music) . I'm not going to compete I just want a loud street beater. Also it will be tuned around 35-37hz. What does the community think would be better?

Ive already purchased 1 of 4. Im about to buy the rest when i get the money. Im powering them with a solid audio 2500d, they are dual 4's so it will throw me in .5 ohm, which is pushing around 3kw for me. Question im having is, what size should i make the enclosure. Many have told me to do 5 cubes. Im limited on space, but i want pure SPL, i SQ just isnt my thing, i want numbers only. What would you guys suggest?

I'm building a 99 2dr Tahoe with 4 DC level 6 18's with 20k watts going to them, and I need some suggestions on the mids and highs. I have an Eclipse 7200 mkII head unit and an Audision bit one laying around that I will be using. I lalso have a DD C2 and an Alpine pdx 150.4 that are not being used that i can use or I might just buy new amps. I need a front stage that will keep up with the bass and not sound horrible. Thanks

I looking at putting 4 sa 8's under seat in 99 silverado. I have 2 10's RF T1d4's in there right now in sealed box. Would I gain anything by putting 4 8's in there? I'm running a RF T10001 at 1 ohms . I would probably need more power but if it won't improve or get louder then I'll just keep what I have. I have about 2 cu ft of air space I think , it may be a little more. Just need some opinions. Thanks

is there such a thing as 4" or 4x6 drivers that can handle midbass or are these things just not meant to play it? If so who makes one?

hello everyone i was wondering if any of you may know of any good sites online that sell just the mid bass drivers in 4 " i have a nice pair of tweeters up front but i wanna change my door speakers that came with the car to some mid bass drivers. it seems the car came with component set speakers stock but who ever own the car before took them out and replace the door speakers with 2 way speakers and upgrade the tweeters and i would like something with a lil bass in my car so it wont be so flat.

Ok I have a IA 40.1 and need two 15 inch subs that will handle 2k rms each daily? I play a lot of screwed & chopped mixtapes so keep that In mind as low frequency extension is key in this install.. thanks

i'm building my new crx style box for my dd 9515 2-morrow. i wanna know what i should tune my spl port too.i have it designed for 50hz right now,but i wanna wait and get some peeps opinions on it 1st.i will be building a 36hz daily slip for the box also. i'm gonna call digital designs in the morning and see what they think. thanx guys. charles :thud:

I've given serious consideration to selling my D2 12 and purchasing a 15. At the moment, however, I would only be able to throw 460 watts rms at the thing. My 12 in a 2 cube box at 28 hz gets louder than I ever need it to with that many watts but will the 15 respond the similarly? I do plan on upgrading to a 1000 watt amp sometime in the future but it wouldn't be for at least another couple of months. I would probably put the 15 in a 2 -2.5 cubic ft sealed box, but space really isn't an issue. Any help at all would be greatly appreciated! Thanks! Mike

well i have built some new 15's too go in the rav4, and once i get my alt, i will be throwing the second saz2000d on them. right now i have one of my ultras in there and she does sound freakin good i need too break out the tl before i pull the ultra out though. some build pics and i have some vids that will be ready tomorrow of some of the build, with short explanations of one of my methods. the cones are salvaged from some damaged sdx 15's i have don't mind the pieces of foil that gets removed before the final glue in and in this pic is a stiff paper dust cap i glued first, as the final dustcaps i used were so big around, and the profile is so shallow that they ar…