Subwoofers / Speakers

Well I received it today and was going to use my garbage box to break it in. The box is very small and I don't expect good output or sq but it is just for break in. My question is, this cheap box came with plastic carrying handles that are recessed into the box and the sub wouldn't clear them, so I had to remove them. I now have two 3-3/4"X 2-1/4" slots in the box. Will this damage my sub? I don't plan on playing at high levels in this box.

Hopefully box construction starts tomorrow. I hope to have it in before the weekends over. Too bad I have tests I need to be studying for this week.

ahh 4 months of patience all turned into 5 minutes of bloody screaming

Sup guys, i'm really interested in the mags, i know it's goin to cost me some money but def. well worth it, i'm thinking of putting up a wall in my car and go with either 3 12" mags or 4 12" mags, most likey each powered by a nine.1 or an RE 12.1, i was wondering how much space would be recommended for them i'm goin to say probably 2.0 cf per sub? and what would be a good tunning for it, probably around 32-35 hz? its either a wall or 2 12" in a crx style box with a orion 2500d.. suggestions are welcome. thanx

started brainstorming & decided to redo my whole system instead of just adding the rlp 15's. I'm looking for decent sq but want to be loud as well. My general knowlegde of car audio is ok (learned a lot on this forum! ) but my knowlegde of sq & how to set it up really sucks. My car has the stock chrysler infinity system in it which isn't a bad setup imo but it really lacks the ability to get loud. It's the 7 speaker system w/ 1 dash tweet, 2 front door pillar tweets, 2 front door 6.75's & the rear shelf speakers. As much as I would love a top o' the line component system, I'm pretty muched tapped with the hu, 15's, amps & everything that went with it.…

Ok, so yes I was one of the lucky ones to demo the prototype of this new Mag. And I "kinda" knew what to expect, though the proto 15 had some chrome problems leaking into the pole causing non 100% performance. So I did know how much better to expect from the production driver. So it came in wed. and I put it in thursday. I just completely swapped it out with my other Mag (previous version) same box, same amp, same amp settings, xover settings, same everything except the new driver. So I let it break in for 2 days on my drives to work (45 min one way). Didn't turn it up past 20, out of 35, just to warm her up and all. just some good ol Panic to break her in. (schools is r…

I just wanted to take a sec to thank Nick and everyone else accociated with Stereo Integrity. You guys make a great product for an excellent price. I have installed the mag in a temporary install. After breaking it in lastnight it was put into a 1.7cu.ft. sealed enclosure(before sub displacement). I am running a memphis 1000d to it. Going from 2 subs to one I will admit I lost some output, BUT, and I mean but, what I lost in output I drastically gained in low end extention and accuracy. Which is fine to me. I have ear problems anyways. Now in total I have about 1 hour listening time on it due to and unexpected amp problem (for some reason the amp goes into thermal p…

nick whats the Xmax of the Mags?

so i was searchin around on another forum i go to and i found where dayton just released a new driver. it is their reference series. well recently i had planned on buying a RL-p but i realized i couldnt afford it. so then i decided on an RL-i 10, but now for about $50 less i can get one of these daytona drivers. here is the link: http://www.partsexpress.com/pe/showdetl.cf...tnumber=295-464 i was just curious if i would be happy with one of these. i plan on gettin 1 10" whether i go with the dayton or the Rl-i and i will be giving it 400 watts. i mainly want SQ, i want to hit every note, hit it hard, and hit low, loudness isnt much of a factor. i would be perfectly happy w…

how can i get a sticker??

I am sure there are going to be alot of happy people this week as I was today when I got home and opened my door and there was the big brown box I have anxiously awaited. And let me tell you this thing is gorgeous!!! I really love the chrome job on it. Can't wait till the morning to get it in and running. THANKS NICK!!!

morning all im looking for a decent set of midbass/midrange drivers need to be 4ohm though, i have about 95wrms per channel from my genesis stereo 100 for them, the tweeters will be run from another genny amp any ideas, ive been looking at the digital designs w6.5 but looking for other ideas the list of whats available isnt huge in the uk so i may import some cheers lads

I wanted to make use of my DD mids and put them in the burb doors. I dont have any tweeters or a crossover so i contacted upstage audio about some CDT ones. He offered me the tw-24 tweeter with 456 crossover for a nice price. My question is, will my DD's with a dcr of 3.5ohms pair up with the 4ohm tweeter and crossover without any problems ? He also offered me an orion P series crossover instead of the cdt one. I have no idea if the Orion would be better. I think the Orion mids have a lower dcr, somewhere near the DD's...could be wrong though please excuse any spelling errors, i cant get it down pat today for some reason

I want sql, i want subs that are tight as can be but still hit you in your chest and get loud. My atlas 15s are loud but just not quite loud enough, my bro still thinks his audiobahns were better, so i need louder, but still tight bass. here's what i'm considering, feel free to suggest other subs but keep them 15s, keep them round, and keep them non-mainstream, if a 15 year old will know what it is, i don't want it the top of the list is the ones i'm leaning towards, only 3 in the list as of now though 1. Stereo Integrity Mag 2. Soundsplinter LMT 3. Ascendant Audio Avalanche -maybe should be in 2nd i've heard great things about the mags, the soundspliter seems t…

midbass(6x9"s too he says) highs and it seems the "highs" are sharing airspace with the subs

First off is how i feel right now. I haven't been this happy in quite awhile (been bassless for nearly...well....its been awhile. i blew up my temp sub on loan from a friend) so...i am working with this. 1994 maxima as in the sig with a memphis 16-MC1000d. my car right now has NO sound dampening products installed as of right now because i wanted to do a before and after test. ive got 30 sq ft of damplifier and a bucket of spectrum waiting to be installed along with 40 sq ft of overkill and some rattlepad. i had a 15 from the first run of drivers installed in my car before i received my new mag. i loved my first driver, but unfortunately had some issues with my setup an…

I've never been a big basshead, so I'm downsizing my idmax down to a pair of 8's. looking to spend about whatever I can sell my idmax for, so I'd say about 200ish, maybe a little more. mounting depth can't be too deep, lets just say 6" tops. I'm thinking about the ID8's right now, any input on those would be nice or any other suggestions. the eD 700s were also considered but ehh...lol. looking for purely SQ. my high end consists of extremis's and AC g2si ribbons. these are going where the rear speakers go, but in a sealed box. thanx yall.

Hey my friend is looking at JBL for a 15 inch woofer. Ive told him to shop around for what he wants and we would like to know if they are any good. Thanks

Time for a new box! :dancingsmilie:

Hey nick man thanks again for stopping to work on the brakes to show me all the cool stuff u have... the 2 hour drive was worth being the 2nd guy to get his mags .... heres some pics of my new equipment minus my battery that hasnt arrived yet

Allright, now that you guys have helped me choose a sub

i can get a pair of koda 6.5 inch components with the tweets and crossover for 175 bucks.. i want something with good midbass but i dont want only midbass. does that sound like a good deal? i had been thinking about the rainbow dreamlines for 300 but i dont know how they compare to the kodas, have heard good things about both but never a comparison. they'll be going in sealed kickpanels in my 87 trans am

I am working on sealed for my 15 as we speak. Anyone come up with one that's 3.5 cubes at 27 that will fit in a trunk? My box will measure 16 x 14.5 x 31.5 and end up being the 3 cubes after bracing and displacement Just looking for other good ideas for a box that would work for me and maybe help others who haven't decided on what their doing yet. and.... HOLY chit am i excited i get a tomorrow...

what should i do?