Subwoofers / Speakers

I'm looking to downsize in the trunk of my 03 civic 4dr. Right now I have 1 15"TC2000 in a 3.2cf @32hz powered by an Alpine PDX 1.1000. Honestly, I could stand to lose a little output. So my question is how does 3 10lvl2 sealed vs. 2 10lvl3 ported compare in terms of output, upper bass freq, & lower bass freq? Also, would both of these setups be a BIG step down to my current one? Thankyou.

What is everyones favorite and best bang for buck? Thank you

what is the displacement of the the MAW-12? tanks

I came across this box and it says its only 3 cubic feet. This does not seem correct. The recommendation for the sub is anywhere from 2.8-4 cubic feet. box link http://www.bestbuy.com/site/olspage.jsp?sk...d=1218009774927 also...if i buy an amp like this...http://www.bestbuy.com/site/olspage.jsp?skuId=9027206&type=product&id=1218009770462 will i get good performance out of this sub because the brand name is like unheard of lol Thanks.

Do the 3" Legatia mids have grilles available? I need to find something to fill these holes left by the 3.5" DLS Ultimate Iridiums the previous owner had and these seem to be one of the only good fits

i want to see what your opinions are on this: death penalty 12" or 12' bl's which can take more power and is it worth it for the money difference?

Every wiring diagram that I have found does not include dual 1 ohm drivers. I am curoius what the ohm load would be for 3 dual 1 ohm drivers wired in series/parallel. I know it will be somewhere between 1.0 and 0.5 ohms. Thanks

Hey all, a few questions before I buy one off Dave (troublestarter). 1. How will this sub sound in 3cuft tuned to 33hz ? 2. Will it sound good off 800wrms class a/b ? Is that enough power ? 3. Do they do them in D2 flavour ? Im looking for something that will do around 135db on a TL or better, but also great sq for my ambient electronica when I turn the subwoofer level down to around 3 on the P77MP. So basically a jack of all trades. I wanted a level 4 however I dont have enough power for one, and dont want to clip it or change to dirty class D power! Thanks

the amp im set on is a rockford fosgate t15001bd on that power which would be louder 2 incriminator audio lethal injections 12s or 1 incriminator audio death penalty 15 if they were in the perfect boxes

I just purchased some bravox cs60cf components and I would like to run them active. I would like to know what is a good rms to give the tweeter and a good rms for the midbass. I have a jl 500/5 that gives 100 rms for front two channels and 25 rms for the back two.

I am currently about to change my subwoofer setup I think I am going to still stick to 1 12" i blew my SSA Zcon on my crescendo bc3500 Give me suggestions on a new woofer or the same woofer diffrent setup! I have about $600 to work with! My whole system is Kenwood DNX 890HD Stinger battery and wire Stock alt Currently ssa Zcon in a 3 cuft box

I got a chance to listen my buddies DC lvl4 15 this weekend and was very impressed. His set up consist of a 06 US Amps MD2, DC lvl4 15 D2 in a 3.5ft3 tuned at 35htz, stock electrical system, and 1 crappy deck in his Chevy S10. I do have to say these are loud low end monsters! I was very impressed with it. He ordered it from Rusty and recieved it the following day!!! Nicely done!

Just curious at what your set up is (box type, size, brand, and amps, etc). and most importantly, how does it sound?

what would the value of a newly reconed DD 3500 18 be? brand new basket, direct connect leads, beefed up to take 2500 +

You have emails.

I currently have 3 JL 10w0's in a sealed box running of a infinity amp that puts out 600rms at 2 ohm. I want a louder system but i dont' have enough money to buy a new amp and the JL's just arent cuttin it. I was thinking about getting a mach 5 mj 18 and putting it in a ported box. Does anyone know this set up will work good with my current amp and be louder than the JL's?

Hello everyone, I'm curious about 12s that could work great in a mid sized ported box 1.5 cubes - 1.75 cubes each powered by a Sundown SAZ1500D. So far what caught my eyes is a pair of DC Level 3 12s or a pair of Sundown SA 12s.

What do you guy think of the older 4 spoke cast frame xtant x series round subs. Model x412. THey seem well built with a beefy magent, and 4 spoke basket. I can get a pair in mint condition. I was wondering how good they were. How much they ran new. And how they sound and what you think of them.. Also what would you pay for a pair of the 12's in like new shape...

does anyone know anything about this company?

Ok so running two rockford p3 15's 2.5 cubic per sub still within Rockford specs of 1.86 to 3.0 cubes. Subs are d2 wired on a RF T1500BDCP at 2ohm so subs seeing a few hundred watts over rms should I be ok with subsonic off? Amps filter is 28hz with a 12db slope . A few people said because I went with closer to the large side I should use the filter but I'm not sure I lose a lot of low end with it on .

I’m new to the forum so sorry if this is not the right place to ask. I have a 2013 Silverado crew cab and I know under the backseat is my only choice without doing a custom Center console my question is what subs will really hit or single sub my budget is 1,000$ for my whole system and I will be doing all my own installation and I have all my door speakers already so I need head unit sub or subs box and amp and wiring kit and I wasn’t going to do any sound proofing just yet I know I’m asking a lot but I just really wanna know can this truck really bang with the downfiring or upfiring setup and if so any help with the box would be great

I purchased the 6 $100 special they had a while back, and I'm now ready to install 4 of the 6. I have an 880HU, and an Infinity 7541a (4ch) to run my mids & highs. I need some suggestions for tweeters (4) that will go good with what I currently have. Thx guys, Vic.

I built a sub box as big as i could to hold two 18's in my acura cl.i run a 1200w hifonics brutus and it slams.But the speakers supostu have 6cft of air .the box only has 6.4 total inside air space. Is there any way to make the subs work easyer.By adding polyfill ,porting,or any other methed.i dont want to build a real intriqet box considering my trunk only holds about 13cft and my box should have 12cft.Any help would be appreciated.

i have 2 12 inch FI BL both are Dual 1 ohm and plan on wiring for a 1 ohm load. what would be a good amp within a 300 350 price range. i was looking into sundown2000D mono amplifier. any other suggestions

how much more midbass can i expect from going from HU powa to 80rms from a power acoustik ov2 400? i will deaden doors a bit when i install amp, but nothing major like taking door apart, just remove panel and a lil bit deadner, will they sound a lot better, ive alaways used HU power becuase i am cheap, but now finally got an amp, will be here sat day