Subwoofers / Speakers

is there ANY vids whatsoever of the evil subs in action? i wana see!

is it possible to put my 12'' dc lvl 4 in a sealed box? (ran @ 1000w off of an SAZ1500) the site doesn't recommend any specifications for a sealed box. Right now I have it in a 32.5 hz ported box (2 cu ft before displacement). #1 what do you think the frequency range for my 32.5 hz ported box should be? #2, what would the frequency range for said sealed box be? I'd like my bass response to be louder in the higher ranges, so I'd like to see if making a sealed box is a possible option? I used to have 2 12'' (older) kicker cvr's in a sealed box, and their response for rock songs were a lot louder than my single DC's.

Whats up guys. Ive been trying to build a box for my (yet to arrive) 18" Ascendant Audio Chaos but it isn't really turning out how i would like it. You guys must have some tricks/ideas that i just dont know about yet (ive only built L-Ported boxes)! I'm trying to get this box as big as possible with the small dimensions i have to work with. I dont know about the tuning frequency, i've been happy with 33hz in previous setups, but i dont know, what do you recommend? I listen to rap music. I'd like the box to fit in my (small) '99 honda civic hatch. These are the max exterior dimensions i can work with: 26.3" deep 30.7" wide 20.1" high It will have to be ported up towar…

I bought it as a hybrid 15 xbl2 sub a few years ago. It was described as smilar to a brahma mk1.5, But it dosnt look anything like most of the brahma motors ive seen. Im thinking about having it reconed to an 18". But from what ive read the brahmas didnt do well as reconed 18"s. if anyone has any input on what motor this is, and if it would do well as an 18" let me know http://img234.imageshack.us/my.php?image=1000380rw9.jpg http://img389.imageshack.us/my.php?image=1000379kr6.jpg http://img255.imageshack.us/my.php?image=1000389in5.jpg http://img389.imageshack.us/my.php?image=1000391hs1.jpg

I was looking at subs at Partsexpress and I saw this. I didn't know who the original manufacturer was but I was hoping you guys might be able to guess. Does parts express have a good reputation (as in, was this really a 550 sub?) My guess would be maybe one the earliest Brahmas, but who knows. Maybe an early HCCA by orion. thanks, b http://www.partsexpress.com/pe/showdetl.cf...tnumber=299-660

We cant decide on what to run on these bad boys (2 of them). So, I wanted to get your guys input. Electrical will be there no matter what we dicide. Mark recommands 1500 watts for daily usage. We were going towards burps w/ a sundown 3000d but now I don't know. dont really want to kill the subs and knowing my bro, he'll drive around with it cranked up. What you guys think?? All amps will be concidered except lanzar and the other suckages. thanks homies

Hi I am trying to get more output from my coworker's car. He currently has a 04 F150 SuperCrew and is running 1 10" Cadence Mallet II 2ohms / Cadence Z1000 amp / Pioneer p4200ub. It currently sound nice but not enough bass at all. I am thinking about porting the box but don't where to start and what I should have it tuned to. Would this be a good idea to do? I currently have (2) RE SE 10's and have my 2.7cu box ported at 33hz and he likes the way it sounds with the low bass rolling. I don't know with his smaller box and the Cadence sub can do... Here are some specs on the box in his setup. Subwoofer fires down Box fits on driver's side under rear seat 5/8 inch MDF Air…

http://www.edesignaudio.com/product_info.php?cPath=1_23_127&products_id=617 System Type 2-Way Frequency Response 40Hz - 20KHz System Sensitivity 89dB Final Impedance 4 Ohm I currently own these 2 amplifiers: Boston Acoustics GT2125 Sundown SAX 100.2 One of the crossovers is damaged so it cannot be used. What could I do? Could I possibly run the tweets off the BA amp and the woofer off the Sundown amp? Other suggestions??

Thats right, my 15" SID2 does not have a logo, but fear not I bought it legit from Nick. I really wish it had a logo on it tho and all the stickers I get done from the local sticker shop sucks real bad. Is there any way I can ship the sub back to SI and get a logo put on the basket?

I need to see how big the frame is

All this hustling & bustling with enclosures,has ne1 tried a free-air install with the Mags?At one time I tried it with a eD12O,it sounded OK but it didnt have enuff output for my taste.Maybe 2-12's would've done it, anyhow I think I read that some of u are going free-air,I would definitely like to hear ur input.NO Nick,I'm not plugging my Mag into a wall socket nor am I doing any free-air test tones(LOL),just wanna know how they would do in this type of setup.So with that said lets get out the MDF and start cutting out those baffles! :boink:

Hello once again! I've had my eyes drooling (yes this makes no sense but roll with it) over a component set of JBL 670 GTi's. Though I ran into a problem. With my knowledge only beginning to spark in the car audio field I've been using Crutchfield as almost a cheat sheet in finding if something fits my vehicle, and they said this set would not, as well did the JBL site. Though their reasoning was only that the depth of the speaker was slightly off (refer to picture). Is this an easy to fix problem?? Or has the pooch been screwed?? Thank you to anyone who replies!

does anyone out there by chance have a file made for WinISD pro alpha? for 15 inch magnum. i had it but lost in durring reformatting (yeah i used to be a computer nerd hehe) but now when i try to make one with the updated alpha pro it says stuff is missing and i need more specs. but on the bright side, it seems the updated pro alpha might be more accurate with magnums? i know lots of stuff looked really crummy on paper wth it in the old pro alpha, but modeling up a 12incher ported in there (yes i kept 12 inch files) it had a better F3 than the ported 15s from the old version.

I picked up 2 re sex10 subs for super cheap and would like to know if its possible to recone them to SSA con recone kit? I'd like to try doing a recone but would rather not do a nice new sub. I know its probably dumb but is it possible? Both are 4 layer 3" VCS but I'm sure gap etc would come into play. Thanks

can i recone my xcon 15 with a zcon 15 kit? also can i recone my xcon 15 with an 18 xcon or zcon kit?

Can i wire two 4 ohm dvc to 1 ohm or two ohms i have a monoblock class d amp us amps xt2000d

I am trying to understand out of phase vs in phase? Lets say you have 2 speakers, a left and a right. Can only the left speaker be out of phase, while the right speaker in in phase? Or if the speakers are out of phase, then both will be out of phase, and its not possible to have just one ?

A 10" gcon in a 2.5 cuft ported box tuned to 33hz with 400 watts @ 4 ohms.

This is my first box so I have no idea what I'm doing! 7.573 cubes @ 34.21Hz I may reduce the port width from 8 inches to 6 inches which will bring the box to 8.574 cubes @ 28.54Hz. Input? (Will change a little with sub displacement) Bottom: 48" x 22" Top: 48" x 22" Left Side: 21.25" x 20.5" Right Side: 20.5" x 20.5" Back: 48" x 20.5" Front: 41.25" x 20.5" Port L1: 14.5" x 20.5" Port L2: 13.25" x 20.5" What would sound the best? Any suggestions?

Since October I have blown 2 subs using the same enclosure and amp. I have the right electrical to back it all up. Originally the sub was a 10 inch xcon which I popped mid November then sent it to SPLaudio for a recone, received it back mid December and now I popped it again. it is in a 1.4 cube box tuned to 32hz. All gains set right and all bass boosters on my stereo are at 0.. any help is appreciated. Thank you.

i want to buy a 12 inch ssa dcon and run it off an re/us amps dts 800.1 mono block which runs 400watts at 1ohm and 280 at 2 ohms. can the dcon be wired down to 1ohm stable or should i keep it at 2 ohms and run the 280rms to it? Thanks

After doing a little reaserch and a unexpected blow to my savings, I think that I am going to go with a set of Alpine type-R components in my mercury sable. a store i went to was askin 250 for the set not including install or anything, I found them online for about 150, and i can do the install myself. my question is,"are these speakers good enough to run a front stage setup?" I would rather not have any rear speakers in the back deck, alowing my subs to breath into the cabin, but im not sure if the alpine components,(powered about 60 watts RMS into each,) can hold thier own... any thoughts?

I used to have a 15 inch avalanche and i LOVED it. i would have ran 2 but they stopped making them. im looking for a great setup that is an LSQ setup which hits the lows GREAT. i want it to be hard to breathe in the car. im thinking of maybe 2 SI mag 15s with probably a 1000/1 on each. will probably be 8cuft ported tuned to 30hz. has anyone heard an avalanche 15 that can compare them? i have 4 15 RE SEs right now but i only installed one and i decided they were not what im looking for. any help will be appreciated thank you.

im about to buy another new system and ive looked at the audioque hdc3 18 for the price it seems to be a good deal but then ive heard they started making them across seas with the mofos and power acoustik so they are getting built cheaply and fall apart does anyone know if audioque has a warranty? or does anyone have a 18 or 15" sub for sale around 1000 watts rms im looking to spend about $300-$350

I have these mystery 15" subwoofers, I need some help finding out who makes them and what they're rated. The way they are installed atm in this guys tahoe would make it a real pain to take them out and check the back, so hopefully this is the easiest solution. The dust caps say five star champion series, Anytime I try to search the internets for them I get 5star ratings on subs and pioneer champion series.