Subwoofers / Speakers

here we are again with more doubts in my mind about the amp I have in my single cab truck with the subs I want. Ive gottin it down to where Im torn between the Fi X 10's series and the Fi SSD 10's series. The X series is signifacntly cheaper but only has the BP power option on it, whereas the SSD has alot more capable. my budget is at $400 and I am getting a custom ported box designed accordingly that fit 2 10's. (yes I am possitive I can get enough proper cubic volume to match either of these subs behind my seat.) If I chose the SSD's, getting all of the available options to maximize its ability, it is out of my $400 range. so thats my predicament, get the BP power…

well i am planning on building 6 of these, i have all parts on hand, so i decided to build one, and measure it before i proceed. they will be tc2+ motors, with 6" spiders, a reproduction of the original tc1000 coil, sa8 cones, and baskets. the leads were stitched by me. the first parameters were with the coils paralleled R(e) = 1.005 ohms Fs = 38.36 hz Qts = .356 Qes = .376 Qms = 6.706 Le = .732mh mms = 112.6grams vas = .1479cu. ft. spl = 79.88 these were in series Re = 3.95 fs = 37.68hz Qts = .331 Qes = .351 Qms = 5.882 Le = 2.874mh Mms = 121.5 grams Vas = .1422cu. ft. in case any of you are used too see vas in liters those are both just a tad under 4liters. now i …

Hello everybody im just looking for some new subs and as of now i i have 2 10 kicker l3 running off a dx 1000.1 and its fairly loud but i want more and i was thinking about 1 12 kicker l7 but i am open to suggestions and i dont want just pure spl but i do want it loud and its in a single cab ford so i dont have alot of room just need some suggestions

As in the title i really want sq and spl since i only will have one 8. it will be ported in the trunk running off 500w

title says it all, if you had $400 to spend on 2 10in. subs, what would you get? and this is for daily use btw.

Plan on sellin my btl 18s..and I ran into a lot of money recently.. Which subs should I go with. Will be walled in a civic 2 21" ia wardens. Or 4 15 btl n2s look at sig for rest of setup

My original thread was edited for unauthorized sales on an open forum Funny since I am not a vendor for any audio company. Anyways, Crescendo has a new lineup of PA mids. Should be baddass. Again I do not sell these. I am posting a new product for y'all to check out

Hi, I'm going to order my first Sundown sub))) And want to start from 8 inch, but I don't know which one to choose, D2 or D4??? I don't have an amp right now and box, want to buy sub first. Any suggestions? Thanks

Hey guys! Haven't posted on here in a pretty long time. Still have all my equipment but my mb quart 6.5s mids blew so I figure guess its time to get some new ones. I have the components hooked up to a pretty ok orion 2 channel amp. Here are the two I'm curious about.... http://www.audiosavings.com/products/Car-Audio-And-Video/NEW-RE-AUDIO-RE6.5C-6.5-COMPONENT-CAR-SPEAKERS-6-1-2/RE6.5C.aspx And these http://www.soundsolutionsaudio.com/store/products/Incriminator-Audio-I-Series-6.5%22-Components.html Lemme know if you need more info! Tell me what you think of these two. Just want some decent speakers back in the truck. Thanks guys!

As of right now I have 2 dd1508s on a MB quart discus 1.5k. I'm looking to get rid of my 8s and upgrade to a single 15. Power output of my amp I'd 4ohm=375 2ohm=750 and 1ohm=1500. I have plenty of space to work with (olds bravada(blazer)). 2 agm deep cycles, and a 200a alt. Depending whether I sell them or trade them I was seeing what people would recommend on my power supply that is reasonable. Like I said I might not buy new if I can get a decent trade for them. Any ideas? (I know daily or spl will be asked and it needs to be all around. This is a daily driver but I do meca on weekends.)

I'm running my 2 12 Dcons to one ohm on a Audiopipe 15001D. Me and my friend were setting the gain up on the amp and one speaker would have a slight hum to it.. You would have to put your ear right up to it to hear it though. The other sounded fine. I'm wondering exactly what it might be. What exactly should I listen for when setting my gain?? I don't want to blow my speakers, so I'm wondering exactly what to listen for. Thanks guys!

I am planning on running 2 SA-8s in my mustang install (not sure if theyll be v1 or v2 yet) and I have a few enclosure questions and need a little help. Im wanting to run them in slot ported enclosures BUT they will not fire into the trunk the will fire into a space that is sealed off from the trunk but ported through the rear deck. My questions are; 1) Whats the smallest box youd reccomend for them to perform great in a daily app and still do good in a burp situation. 2) Anybody have a box design program that will map out the whole design (dimensions and all) ? They would like to use to give me a box idea.

found a blown mtx 9500 15 on my local craigslist for $30 so i figured id get it and have it re coned by psi. i contacted team psi and caco and he told me $175 for a 2000w re cone. ill have $195 in it and if i can get $250-$300 for it, why not? i was talking to my buddy i sold my solo x 10's to and he said he wants to do 1 15 in his car and told me that if i wanted, he will give me the 2 solo x's for the 1 15. what do you all think?????

Unauthorized sales are not allowed here. Sorry. If you would like a vendor section on the site please visit http://www.soundsolutionsaudio.com/index.php/vendors.html

I've got a 15 passenger van and am looking to install a low budget system (anything is an upgrade to the 2 front door speakers I have currently) I have a pair of 6 x 9 speakers at each row of seats in enclosures and the 6x 9's in the front doors for a total of 10 speakers. I also have a powered bazooka sub I want to use in the rear. I have a 4 or 5 year old Pioneer Premier head unit that I plan to connect to. I would like to add a 4 channel amp to give the 6 x 9's a bit more power and have the following questions I'm hoping someone can help me with: 1. Would 1 four channel amp be enough and how many watts would it need to be? Could I get away with a 300W amp or would I …

Got recommendations for both of these subs and gonna have 10"'s box ported designed by RAM designs. Going to have a JL audio 1000/1v2 running them, if anyone has any other recommendations my budget is roughly $400. thanks

So I an installing four I hope anyways E8's but magnet diameter and true mounting depth matter. I am putting these under the rear seat of a 2011 Titan king cab and am in the process of building the box the max. At this point I am actually settling on the E series due to the fact that the SA r so damn big. Now if these subs magnets are in fact to large what would be a viable 8 to use in the truck. Power wise right now is a Lil wonder 3 that says it makes 2600 at 1 ohm. But, I might also be looking at other options for amplification. As of right now the box has a total volume of 2.51 FT^3 and I will accommadate port size to tune to what ever sub I get. Many thanks in…

Just as the Topic title states. I have been getting MIXED Responses on whether "Breaking In" your Subs is necessary. What do you think about that or do you not do it at all. I have always "Broke In" my subs, but I have a Comp coming up in the next week or Couple of weeks from now. My subs are pretty much stiff, as I have just installed them today. Any help would be much appreciated. Thank you in advance for your Input on this matter.

Has anyone come across anymore info on these subs, other than that the company is bringing 6 new lines? I'm really interested to see the changes made.

So here's the lowdown, I have a 93 Subaru legacy sedan and I'm looking for a sub and an amp.About 70% of what i listen to is metal, and the other 30% is mostly dubstep with a bit of rap thrown in on the rare occasion.Basically i want something that will sound good with the double bass and fast bass lines in metal, but still have some thump for dubstep.Looking to keep it under $400 for both.I've been seriously considering a dcon 12,but i saw a vendor selling an open box sa-12 in the classifieds.I'd like some good sq but in not an audiophile, if it will sound good with music I'd be more than happy.

I am really stuck and what subs to run.. 2 Audioque HDC312 or 2 Fi BL. I have a 4.0 cubic box after displacement and port area Its tunned to 33hz. I will be powering them with a Sundown SAZ-3000D. I can't make up my mind what I want to run

I have an idea what the majority is gonna say but i'll ask any ways. What better for SPL 6 XCON 10'S or 4 ZCON 12'S.

I need some advise from actual users or if u actually heard either one of these ive been looking for about 2 months now and ive narrowed it down to these 2. so of only these which would u choose????? one sub setup ported in the trunk 350w @ 2ohms....thanks for the advise

I got an Email from this guy awhile ago named John from adassa audio promoting the Kevlar subwoofer. It seems to be built extremely well and its a daily driver and it says it takes 6 k! I talked to him about it and he said it takes 6k extremely well. And the spces seem very good. What do you guys think about this woofer? http://www.adassaaudio.co.uk/Kevlar15SubwoooferPage.html Here's some more stuff on them (Research) "We at Adassa Audio are always working on new product like the new Adassa subs ADA-KEV-15.1 and ADA-KEV-12.1 it has a 200oz and 440oz its a dual 1, dual 2 its has a 3" voice coil and 6 spiders on the 15 and 4 spiders on the 12” CCAW Flat wire Voice Coil a…

I have 500 watts @2 ohm for power. A prefab box that's 1.8 cu ft tuned at 31hz slot ported. I listen to all differnt kind of music. I would like the best sq and if it gets loud that's good too. So which 12" should I go with with those specs.