Subwoofers / Speakers

what to know what people think about the e8's. I would like to keep a lower wattage system. I did see a video that someone did a 149db on one of them.

CVLT-50 1" TITANIUM BULLET TWEETERS SPECIFICATIONS: Oversize 1” High Temperature Kapton Voice Coil High Density Neodymium Motor Structure Weight Titanium Dome Structure with Ferro Fluid Cooling Cast Aluminum Frame with Chrome Finish Impedance: 3 ohm Power: 50W RMS / 100W peak SPL @1w/1m: 109dB+ Frequency Response: 3KHz-20KHz Mounting Depth: 1.6” Packed in pairs with Mylar Bass Blocking Capacitors. Replacement Diaphrams Availible. CVLT-60 - TWEETERS - Cadence Acoustics, LTD If you have heard or heard of these, what do you think? -- No results found for 'CVLT-50'.

Does anyone know what this sub is. I have somebody looking to sell it to me but we don't know what it its. \ And yes it is a 10".

The sub box is 2.0 cubic ft per sub tune at 34hz with Sundown sa 12. I've heard that with tunning below 35hz your lpf should be around 80hz or below! Any truth to that? And shouldn't the lpf slope play a part say if 80 hz was best is that with a 12db slope or 24db or does that even mater?

does flare count as port length? In a roung flare port... thank you...

Hey well i lik eplanning ahead inabout 6 months im going to be doing major work on my 05 scion tc i currently have a 12" mag and its awsome thanks again nick... but im thinking to go insane... i was thing of doing something like this http://www.carstereo.com/images/installs/xxx9%2D01%2Ejpg in the front and something like this in the back http://www.carstereo.com/images/installs/i...%5Fsystem%2Ejpg or http://www.carstereo.com/images/installs/L...B%40B%2D3%2Ejpg sorta mixxed probably like 4-6 subs in the rear and 2 in the dash.... havent decided on amps and the fronts rears ect... but i do know what i want... and i know i have to have my car stripped and dynamated to the …

I've been too busy to put my mag 15 in my 3.7cf tuned to 27hz box that my friend built.I am picking the box up in 2 days and was wondering,when i asked my friend the size of the box he built and he told me 3.7cf, but when i asked him if it's tuned to 27 hz he said theres 25sq inches of port.Does that sound like it's tuned to 27hz?

alright, un doing a job for another cheap ass with a DONK car...... he wants 4 15's ... and wants to spend no more then 125 a sub...... .. o yeah.. he also wants to "bang" and thay have to look shinny cause he wants to invert them....... these poeple make me sick...... any ideas..... my first thought was maw 15's... but there sold out.

http://www.sonicelectronix.com/item_34766_Rockford-Fosgate-P3D4-12.html The styling on that bish is craaaaazy. I just want to know from designer's and manufacturer's how much thought goes into the looks department of a sub, or...any product for that matter. I know there's you "I could care less how it looks, it's all about performance" but to me that's almost never true. Those blue ass "HIFONICS" logos and smooth one piece dustcaps like the AA Havoc has all add to the final product. (Not saying you should buy a Hifonics or Rockford P3 or even a Havoc just for looks) So I just want input from other people. I'll probably get mad hate for puttin the Rockford link, but all th…

Hey guys, Just need some info on these babies (the 12" D2's) mainly. First off....price! Secondly, I would like to know how these monsters stack up against the L7's and the Fi BL subs. I'm stuck between getting the 12" L7, BL, or D2. Performance....The car that anything will be put in is a '03 ford taurus (seats do fold down). Each sub will be powered off of a RF T10001.bd amp. in a box like this... http://www.subwoofertools.com/forum/ported...;Fs=27&CE=0 So which sub will I get the most performance out of? The subs that I need to compete with, here in my town, are two 12" L7's. Everyone thinks nothing can compare to them. Can I show them wrong with a couple MAG's?…

Which sub will perform better: RE Audio SRX Electrical Q Value -Qes: 0.45 Mechanical Q Value -Qms: 4.87 Total Speaker Q Value -Qts: 0.41 Free Air Resonance -Fs: 23 Hz Equivalent Compliance -Vas: 203 liters One-Way, Linear Excursion -Xmax: 18 mm Efficiency -SPL 1W/1m: 87.6 dB SPL Effective Piston Area -Sd: 810 cm^2 DC Resistance -Re: 1.8 ohm Nominal Impedance -Znom: Dual 4 ohm Thermal Power Handling -Pe: 300 W Force Factor -Bl: 14.35 IA 187 In the same order as above: Qes: 0.85 Qms: 4.76 Qts: .72 Fs: 35hz Vas: 105l Xmax: 22mm peak to peak Spl: 89.2db Sd: 800 DC Re: ?? Impedance: dual 4 Thermal power: 300w rms Bl: 17tm

So I was told not to open the back hatch\tailgate in my Tahoe while my subs are playing (in a ported enclosure)..Something about it bottoming them out? Is this true, and if so why do I see videos of people doing it to put paper or other items in front of their port?

Now everyone knows that LR posted his free box of the week on CA and it looks good to me but then again i dont know much about it, he does. is 3.2ft^3 big enough ? hes got it tuned to 32 and that seems so much easier when you have all of the cutout sizes laid out for you in that diagram. im thinking i might want the tuning more at say 29 but im not sure. i was going to go sealed for the easiness of the construction versus ported but im lookingat my options as of now. anyone care to comment?

Dont know much about the RE SX, XXX or the MT 12 subwoofer, just saying how how they compare to the Kicker L7 12 or the Soundstream T4 12? Do they need a ported box or a sealed box? About how much each one run in price have $1200 for the box, subs and amp?

i got just bought a four re sx 15's from a guy at work after i hooked it up but something about it i dont like so im selling it as soon as i get back home its in a caprice but anyway do you guys think i should go with four ported 12's i think they will fit or two ported 15's? im looking at the btl twelves or the t3 tss twelves what do yall guys think?

does anyone on this forum have any experience with orion hcca's? buying some very shortly and i want some testimony as to how they perform and if they experience any common problems. i watched their head to head comp on youtube but that doesnt tell me much. any feedback is greatly appreciated. they are for daily street beating and are gonna be powered by a zx2500.1 and in a 6 cub ft. box @ 35hz.

I just picked up a set a focal components and was wondering what the seasoned guys on here would suggest. My problem is i dont have room to build large pods outside the doors to house the 6.5. Could i use like a 6 inch pvc pipe and seal up the back side of it and glass up a front baffle to mount to the door skin at the factory location. I have about 7 inches between the outer and inner door skins and no window interference. I want the best sound out of these without building pods outside the door panel. Is this going to be enought volume or should i go a different route. Thanks guys.

I recently got my first comp set. They where used. I hooked them up to my head unit. They are working just not much came out of the mid bass speaker. Is this do to lack of power from the head unit? I have an amp to power th just do not have all my cables to connect it. I was excited and wanted to here them. Should I expect better results once connected to my amp?

I will have to make some door panels since the Crescendo 8's wont fit in the stock locations without the factory door panels blocking half the speaker. So I think panels are the best choice here. I will probably do them in 3/4 MDF and flush mount them and cover in black vinyl to match truck and box. I was going to do 6's also in doors but dont have room unless I really get into the storage areas of the stock panels which I dont really want to do. Should I do the FT1's flush mounted in door panels too or try my hand at fiber glassing some pillar pods in each corner. Will they be loud enough in doors? I hate to make a even bigger blind spot in the corner in the pillar, whic…

I have a couple questions. First would be: I have an 86 Ford Crown Vic that i just installed some 5 1/4 coaxials in the front kick panels, and i was wondering if i added a baffle or some type of backstop if it would increase the volume a little bit. I dare not list the speakers in question because of the shittyness. They are just mounted in the factory location under the door panel cover. Second question would be if i ran 2 sets of four ohm speakers to my two channel amp what ohm load would the amplifier see. Amp is a RF punch 450.2 powering 2 sets of coaxials. I ran the left channels both positives to the amps positive speaker output and the same with the negative…

hey guys, i normally dont put aftermarket door speakers in my car bc i have never had anything loud enough to need them lol, but i got an 18" fi q and its pretty loud. my door speakers are in the process of becoming blown lol, so im looking to upgrade...i dont really want to run an amp, would like to just do some speakers, preferably that will fit in the stock location. it will be in a 2003 ford focus zx3. the stock speakers are 6x8 and 3 inches deep. any help would be greatly appreciated. thanx guys.

I just got a new car recently a 2006 ford fusion. And I already have a aftermarket touch screen in it. I just want to put door speakers in the front and the back. But I got no idea what kind. In my Taurus I had mTX front speakers and they sounded pretty good. Any suggestions. Keep in mind I don't have much money do to the fact I got a kid on the way. So what are your guys opinion on good quality door speakers

hello everyone i just got a quick question. i need some advice, I have a 2006 cadillac escalade with 26"s on it and i got 1 12inch jl audio w7 with a 2000 watt amp. it pounds really hard, its hits 135 on the decimal reading. i want to know what kind of door speakers to get so that I have amazing hi's in my doors. i want to be super loud and screaming over my base . what should i get? give me some insight. i got money so the cost dnt matter. hit me up

I dont care if they are components or coaxials but im getting a sundown sax50.4 but i need door speakers ill take any suggestions the amp does 50 per 4 at 4 ohms or 80 per 4 at 2 ohms. Im trying not to spend more than 100 maybe 125 including shipping. All input is welcome thanks

what are people getting into their doors ? i dont mind some cutting and whatnot, but i'm not looking to make a whole new door skin. i had hoped to get a set of 6.5 comps and a mid base in the door. the comps look easy enough , but where could i put the mid base ? would it be bad to put the mid base in the back doors? or under seats ? any pics would go a long way for me. thanks