Subwoofers / Speakers

My dad is looking for a good sub for the boat. It will be in a cutout in the inner hull in the cabin area, so it will need to perform well in IB. I'm not too sure of the amount of moisture it will be exposed to, and I'm not sure if any of the actual marine subs will perform in IB. Any suggestions?

O.K so my brother is going to rebuild his system he had 2 12 alpine type r's and wants something louder deeper and just overall better than his old system. He has the U.S amps xt2000d 1000wrms @1 ohm. I was thinking to tell him to get an Fi SSD but the only thing is that if it could handle 1000wrms daily w/o options or if with them which ones. And what kind of box should you guys tell us to buils ported what tuning frequency or if sealed. He wants something for a daily driver. Or do you guys recommend a different sub. His buget is no more than 250 on a sub. And just 1. And do you guys no what the new design is going to be for the ssd

im trying to find good mids and highs for my truck my buddy just bought oxygen audio 6 1/2 and there loud as hell but they were $100 a piece and they dont come in pairs. Anyone know of good mids and highs that come in pairs and are not super expensive.

I am in search of good mid-high range speakers for my car doors. I am looking for good sound for a reasonable price. I was wondering what you guys thought...

good news for me. seems like there will be an re audio and adire audio in romania which one of adire's or re's subs competes to the rl-i 10 ? seems to me like koda 10 would be a contender in the rl-i price range... i have to talk to the dealer, maybe he can find a way to import an ss *fingers crossed*

Ok life's been hectic. Accepted a job offer starting out almost five bucks more an hr than I make now.. after 3 years. The audio has been on hold. Looking for a tahoe or gmc yukon. Just want opinions. Either going to order my second dc level 6 18.. or just order a pair of ssa evil 18s. For the price of one sub is close to just ordering the evils. And I know y'all are biased. But that's ok. I the level 6 is a skull cracker.. But not very musical. I don't want something just for burps lol

i got a pair of Obcon 12" shark tooth basket subs for free. i looked them up and they sell for $150.00 each. they came in an R/T labyrinth slot ported box that sells for $130.00, i was just wondering if these are any good looks like this: i was thinking about getting a 1200watt pioneer amp for em'

im looking for a good pair of components for an SQ install 6.5" for around $200 shipped, going at around 65w at 4 ohms or 180 at 4 ohm. do yall have any suggestions? and if so where to purchase them as well, im going 2 be playing them with a US Amps merlin md-41 amp.

Hi, I'm new to this forum, and i need some opinion, what you guys think of this setup? 4x RE Audio SE 15's in 6.7~7.0cuft Sealed Enclosure power by 2x Sundown SAZ-1500D giving them like 750wrms each. 8x RE Audio RE 6.5 Components power by 2x Sundown SAX100.2 giving them like 75-100 wrms or 1x Sundown SAX100.4 giving them like 80 wrms, I read that the RE 6.5 are rated 50wrms can they take more than that? will the 8x RE Audio RE 6.5 be enough for the 4x SE 15's? What Alternator size will be good for this setup? The ones that have experience with both MTX and RE Audio, will the 4x RE SE15's Sealed be louder than 4x MTX 7500 15's also sealed? sorry for so many questions but …

taking any suggestions on good side components for 2003 grand am...4x6's and 6x9's. does anyone have any experience with infinity kappas or no anything about them...? they look like good side components

hey im looking for a awesome SQ tweeter for my diy setup. 300 or so buck a pair. any sugjestions? all i found so far is morel supreme . can anyone tell me the diference between the 110 and 130 version of those?

Hey guys, looking to upgrade soon. I just got my Sundown SAZ-1500 in the other day, running it at 2 ohm on 2 Memphis M-Class 10's ported and Its not very loud at all. I was looking at running 2 12's possibly ported. Or maybe 1 or 2 15's in Sealed enclosure. It's going in the back seat of a Toyota Tacoma x-cab so I dont have alot of room. I need subs that I can run the pair at 1 ohm. I originally was thinking of either 2 Fi SSD's or 2 Fi Q's. I looked into the SI Mag's but they would put me at .5 ohm and I'm not doing that. Any suggestions would be appreciated.

Im looking for a good tweeter match for my MLI-6.5. Both the mid and the tweeter will be in the door. I could probably find a place to put the tweeter on axis if that matters any. It will be a active system ran off a US Acoustics USX-4065 (zed built) rated at 65x4 at 4 ohms. The substage will be a 18" xcon ran off a saz-1500d. Im looking for good sound. If it has the ability to get loud thats just a plus.

For purely academic purposes, imagine a ported enclosure tuned with 2 aeroports. If the aeroports were different lengths...and therefore different tunings, what would the net result to the listener be? Would the box only keep one tuning?...would the tuning freq be "spread out"?...would space/time warp and fold back on itself thereby negating this whole exercise? Thanks

got 1.5 cubes for sealed / need advice on subsafter some careful considerations, i cant do a ported box.too much space. i can do 1.5 cuft SEALED after displacement. i got the amp to push these @1000w rms. ive been going back and forth with different configurations for about a week now, my head hurts . my paycheck came today and i wanna buy a sub before i run outta money. so now im looking for a sealed configuration for a stereo integrity mag v3. OR two sundown audio e10 v2's so... 1- does a mag v3 work well sealed @ 1.5 cuft ? the subs web site recommends 1 cuft. will i get more output with the extra .5 cuft ? 2- which will give me deeper bass ? the e-10's or the si mag…

well i was surfing the local craigslist to see if i could scoop anything up dirt cheap again and came across these. 3 oldschool american bass vfl 10's D6ohm coils cones arent in the best condition but motors are imaculate. i only gave $75 for all 3 in a box. magnet says made in usa and precisly hand crafted subwoofer. can someone give me some info on these? i cant find any!!

1999 mercedes benz kompressor c230 I plans are to stay full IA apart from components/coaxials via CDT. But I don't consider this a car really "usable" for spl so i'm at a loss as to what I should go for now, original plans were 6 10" 187 in a s10 extended cab on a new 20.1 but... didn't go that route and this is what I ended up with for 3000 dollars. Hey, it's a benz I still would like to do the 20.1 down the road but i'm at a total loss as to what subs to try now as room/trunk would be an issue, never had a trunk car so i'm unsure how those setups work exactly. Anyone have any suggestions as to what size/sub to try ( sticking with IA ) to give me the bass i'd like but …

As stated i just got back my 2007 Fi Bl 12 from the kid i sold it to a couple of years ago. He said it was blown so i went and picked it up. Come to find out one of the tensile leads was broken at the connector and the coils both read perfect. Coil still looks great and suspension is still pretty stiff. My questions are: 1.) Can i lengthen the tensile lead with shielded 12 gauge speaker wire? 2.)What How much would a complete recone run (psi or fi)? 3.) Once i fix it how much could i sell it for?

What could they be? I love the packaging from the outside, all the Fragile tape and warnings. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image No hints yet. Good packaging though. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Something from Incriminator Audio? Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Some Flatlynes Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image They are a lot heavier then they look. Great build quality too. Stitched leads and Nice black chrome finish Reduced: 82% of ori…

Well here goes: I have 2 15" RE SX's and two Sundown Audio SAZ 1500d's. Problem is, the Fs of the SX is 27.8 and the box that I'm going to use(or was gonna use) is tuned to 54hz. Now being that the Fs is 27.8, it's not a SPL sub now I realize in a box that is tuned to 54hz.(I'm still learning I'm a semi-newb) I've heard the 15" SX in a 46hz tuned box with a 1000 watt DD amplifier and it sounded ok, but I've had a few people tell me, these 2 SX's are going to sound bad as in terrible in a 54hz box. Does anyone have any opinions/suggestions/solutions or alternatives? I may be switching sub's and if I have to whats a better alternative? I need 2 15's with the Fs around 34-…

so i bought a re se 10 about a year ago. i bought it from dealer cost audio or whatever. either way ive heard of problems from this site after i ordered. so i installed it friday for the first time. everything was hooked up correctly. triple checked before making it final. i turned on my hu, turned up the volume to just get the sub moving. after about an hour i turned it up a little more, went to the cargo area to check and i noticed this little paper ruslting sound. after a few more hours i turned the volume up more and the sound was more prominent. now its just annoying. i cant really hear it from the front. but its noticable from the back. as volume goes up it gets wor…

ok, well i am loving the Magnum and wantto add a 2nd 12 into my car, no 15s too big. But one, i know they no longer make them and only newer ones will be coming out. Secondly they only make D2 versions. Should i wait for the new ones to come out and will they be D4 or should just buy another one of the older siler multi spoke ones and get another amp?

Is there a 1000w sub that is all around better then the Fi Bl in its price range? Post anything you may have had experience that you think would beat it in output and sound quality. This is just to see whats in my league or better.

Currently I am Running a 15" Fi Q ported in a 4 Cu. Ft. box supposedly tuned to about 32-33hz and stock speakers in a 99' Volvo S70. I am missing out on some hz's like above 60ish probably but i want some more lows... so what im thinking of doing is for now get some midbass speakers (or maybe even just some good 6.5's) so play from like 65-70hz up and leave the rest the same... then later replace my 15 with an 18" Q tuned at 28 and then bring the midbass down to like 60-65...? does this seem logical? Also would a 18 Q in a 5 cu ft box work well or do i need to get closer to like 6 or 6.5

Alright, the other day, just messing around with my subs(SWS-1023D's in a "folded horn" box), i decided to run one of them reversed with the other one regular. also in my adventures, i placed them in the far back of my trunk facing(subs and port) towards the cab. I was suprised when i cranked the music and heard not only an increase in SPl but also a better SQ . Now being the Noob that I am, im curious to why this resulted like it did. i tried searching other forums but failed to come up with any useful information. and if it is a simple explination, why wasnt it set up like this when i had installed? Thanks for any and all comments