Subwoofers / Speakers

I measure my trunk...w/ the spare in it Alot tighter than i expected So 2 12s will fit the bill I was thinking 2 maw12's in a 4 cubic ft. box tuned to 30hz or 28hz then give them bout 400-500 watts a piece...that sound good?

how can i get a sticker??

I have built a boxthats tuned to 32 hz,after port and spkr displacement i have 1.0 cu.ft of space left, my question is will this work or will i need to build a different box this is a dual ported box and it is for 2 12 mags new version....also if this will not work how about a sealed dual chambered box with each chamber @2.2 cu.ft.,will this be to big sealed? btw the amp is a DEI2400D(1400watts @ 4ohms, 2400watts@ 2 ohms)

I'm looking to purchase 2 Fi BTL 12's, but i have no clue what an "I Heat Ring" is. I want to power these subs really good, do i need the I heat Ring?

I'm looking to pick up a 10" for my blazer and two 8"s for a buddy's truck and these seem to fit the bill for our applications, but I can't seem to find any sound reviews from people on here. Has anybody demo'd them or heard them at all? I don't doubt the quality of them as they wouldn't be on SSA if they weren't of the highest quality, but I'm just curious about the SQ, particularly in a small/medium sealed box.

sorry just had to post how damn psyched I am now that the announcement has been made about the new driver sale. I knew it was coming any day now it had been too quiet around here. So now to just figure out 2 things: 1) how/where the hell I am pulling the cash out of my ass for new sub(s) after vacation next week. (hehe... it can be done) 2) do I stick with a single 15??? dual 12s??? or dual 15s???? but of course the whole point of this thread is... NEW SI SUBS ARE SOON TO BE HAD!!!

what could have gone wrong? i dont have a subwoofer yet. i made a thread about that. and will be getting a subwoofer later but for now i just got the SPR 60C, alpine type R components the midbass is like gone. my cheapo stock speakers had slightly more midbass than these... they are powered by a pioneer amp, GM-D8604 what could be wrong? or are components supposed to have barely any bass whatsoever.... its pretty bad. the highs are very clear. a bit too harsh highs but when i set the headunit to EQ the bass up, the bass sounds bad, slight increase in bass, but pretty bad quality bass? The gain on the…

i know both of the subs i want are really good. i just dont know what subs i want yet. its either going to be between the ssa xcon 18s or the sundown 18s. im going for more spl then anything. which one would put up more numbers? this is what i plan on doing to my truck no matter what. i already have the entire cab sound deadened. i have 4 super big interstate batteries to power everything, big 3, dual alts. so which one would be the best option for me?

ok so i have a rockford fosgate power hx2 in a 4.6cuft ported at 40hz. my saz1500 is on its way to db-r for repair. well i got this sub bnib and the only amp i've had on it is a bazooka 500wrms mono. for like 2 months it was wired at 1ohm.well the amp is only 2 ohm stable and it decided it wasnt gonna except the 1ohm load anymore. so its at 4ohm now which would be around 250wrms. i've read and heard that u can underpower subs but read alot more that that is b.s. well the sub is rated at 300-1000wrms and i've been thinkin bout this alot. well i took my ol' lady to work earlier and im hearing what sounds like sumthing againts the box rattling. my box is mounted where my bac…

Hi guys, I currently have two regular pioneer 10" shallow mount subs in the back of my dodge ram. i was planning on upgrading to the the premium pioneer 10"s ( the s4 model) this friday. I have a rocksford fosgate r500 d series amp. the old subs run at around 200-250 rms i belive, and the new ones would run at 300 rms. my amp pushes out 500 raw rms. i am not sure ( despite what they told me at the aduio shop) wether or not my amp will be enough to properly power the new subs. The guy says whenever he does a system with the preium pioneers he uses the r500 amp. However, i'd hate to upgrade only to see a minimal change in performance. does anyone have any kind of experience…

I went over to mark's house and got to play with his Term Lab. Magic freq was 42hz and i did a 145.7 off a Tone and 143 off music. the van is nothing but rattles though. Box is tuned to low 30's. wasnt able to run everything at full tilt because of voltage loss.

From a lot of help from many folks here at SSA, M5, jim, neon and acidburn come to mind(thanks dudes), I decided to go active. I ordered my pio 880 here from SSA because in the end, i've been helped here more and would rather give my hard earned dollars to this place when they are an option. I will be deadening the whole vehicle at some point and doing the doors when I start on the speakers, I cant even figure out how to pop the doors off on this vehicle, and as it's cold as chit I haven't spent anytime on it yet. Future plans also are to add a car-puter, and bass at some point I now need help again for going active with the drivers for the front stage. Right now I am …

Im trying to decide how to get the most bang for the buck out of 2 twelves and a Hifonics BXi 2008D what im not sure is whether i should go with the q's or bl's im putting them in a jeep cherokee and any help on what ones i should get and ported or not would be awesome thanks.

OK I made a new box (sealed) but I dont know how many cu.ft net it is? the box it the inside is 12"D 27.1/2"H 23"W with a driver displacement of 0.25 how many net cu.ft is it ????? help!?!?!

What are some user reviews of the Digital Designs 2500 15"?

Just thought I'd give you the heads up on a couple of videos I shot with my buddy's. Tej is now a well known entity on www.realmofexcursion.com, so has loads of movies in the SI section :-D Tej's powerplant is the RFbd1500@1ohm Sound great. Big car too. The other guy is Daniel. His Mag 12" was powered off a Brutus 1500d, which sounded ass Here goes: http://www.realmofexcursion.com/videos/Sou.../magnum12.9.wmv http://www.realmofexcursion.com/videos/Sou...magnum12.10.wmv There is also another crazy video which I will hopefully post up soon.... ENJOY! :-D

headunit - alpine 9884 seps - polk 6501db amps - rf and sundown 3000 sub - dc audio level 4xl 15" video thank you

so, my friend Jeremiah tells me that his brother in law Sean was throwing away some vintage 70s 15" pioneers, so I was like sweet drop that shit in your trunk, I'll give you a holla' in 4 to 5 hours. so about 5 hours later, I showed up at his house, he told me Sean had ripped the woofers up to keep people from taking em. well, they werent actually in bad shape ;o the mids and tweets are destroyed, nothing I cant get off parts express for 50$ or less, I was more interested in the 15s for sub use (5.1 stereo with integrated subwoofer amp, my 8 that came with it was sold right after I got my 18 so I could buy some wood for it XD ) cause frankly, a 200hz crossover point mean…

I'm looking for a 12'' subwoofer to work well in a .7 to 1 cuft enclosure before speaker displacements. Getting about 1000RMS. I listen to a lot of 80% rap and 20% rock and possibly some techno here and there. I was aiming for a Fi Q 12 but i was told that there are subs around that work really well in small sealed enclosures. I want it to be as loud as possible. I also have had a RE SX 12 in a .6 sealed box after displacements. It did really well and sounded clean but it got pretty warm. I'm just exploring my options. Any feedback on woofers is greatly appreciated! Thanks

ahh 4 months of patience all turned into 5 minutes of bloody screaming

Hi, I was wondering if there was a 15" sub that can fit in a smaller box than an IDQ15" (1.25cuft gross) Thanks Kelvin

what differences would i notice with a 12 inch with these differnt box sizes, 1.0CF, 1.3CF, 1.5CF would i loose any sound quality or puchiness as i went bigger? i ask becuase i found a way to make a bit more space in my truck and as you all saw my box design in another post it ended up around 1.25CF after displacement. if you think it will make a "good" difference i can crank it up to about 1.3-1.4CF after displacement.

I was just wondering about different mid-bass speaker sizes... How would some one select what size speaker to put in there door form 6.5", 8", or 10"...(like 8" and 2 6.5's, or 10" only, or 4 6.5's Use my set up for exsample... I'm not buying nothing yet I was just sitting around thinking about it. And yes it change up abit but that's car audio 2005 tahoe My set up- H/U iPad mini EQ. Sound stream mpq-7xo Front stock Rear stock. Sold my crescendo pwx Subs two bc2000 and 2 18" ethos (one on the way...2nd still have to pay off) Stock alt, crescendo g31 batt with diehard platinum g31…

hello SSA goers...... today, i am wondering, what 2 10's, 212's, or 1 15 would be louder than 1 12" mtx 9500 but still in my price ranger? iv always owned kicker,mtx,rockford, but i want to try some of this "incriminator" audio or sundown or skar. i like trying new things but i figured id ask someone with experence. im having money issues and need a little cash so im selling both my 9500's ( 475 plus shipping) to get something a little smaller. if i get 2 10's or 2 12's of something, ill spend about 200 on each sub max. or if i go with 1 15, ill spend around 350-375. i have a '95 ford ranger ext. cab running a kicker zx1500.1 w/ 4 gauge wireing. i dont reallt have a box l…