Fisher Customs

Im thinking about ordering some more stock of Tshirts. They never really went over all that well, when I had them a couple years ago. But lately, I have been getting asked quite often when I would have them back in stock. I wanted to test the waters first, before I spent a lot of money ordering in a bunch of shirts. Who might be interested? Would you be willing to pre-order? The price will probably be around $18-20 shipped via USPS priority. Also, what sizes would I need. Last time I ordered M-XL, but had quite a few requests for other sizes (mainly bigger ones). So who would be game?

Due to some crazy hours at work lately (and not looking to slow down anytime real soon), I have made the decision that I will no longer be building enclosures for an undetermined amount of time. It has been a very, very tough decision to make, but I feel it is necessary for my customers as well as FC as a whole. I do not get to spend nearly as much time on my computer at home these days, so emails sit in my inbox. When I do have time to answer emails, it is taking away time from the shop, and time is very limited right now. Customer service is just as important to me as the quality of the final product, so I feel the only way to fairly treat my customers is by shutting d…

This box will be orientated a little differently than normal in his trunk. Port will be firing sideways.

Feels good to get in the groove again. This is a pretty straight forward build for a local guy here in Wichita. Will be finished off with black carpet in the next few days. Onto the pics...

I have had good luck in the past with contests to get stuff designed. Had a lot of success with the logo design contest, and then the business card, so Im ready to give it another try. Im looking to get some new T-Shirts designed. The last ones were 1 color front (just said "FisherCustoms.com" on on left chest area) and a 2 color back (had my logo). I would be ok to go with 2 colors front and back (orange and silver) to add a little more to the shirts. The contest will be for the best T shirt design. Will probably open up a second thread to vote on. The winner will receive a free T shirt. No real rules, just want something with my logo on it, that looks nice. I wont give …

This one is 3 cubes @ 35 hz for a trio of DD 1508's I believe. Used a pair of 4" precision ports and had to put an elbow on each. Box will be left bare and have all edges rounded over.

Dont recall all the specs and whatnot for this one, but Im sure he will step in with some info. Little different design, which is nice to build every now and again. Here are the pics from tonight...

Heres what happened. I sold the Q's and enclosure yesterday to the guy. It sounded damn nice in his jeep too. He just bought the jeep last Thursday btw. He said he went to sleep and got woke up to see this.... The Q's baskets sitting in the enclosure... The amp is leaning against the enclosure... I guess the firefighters said that the fire started from a faulty rear dome light. I feel so bad for him. The amp was actually mine. I let him borrow it until his AQ2200d gets here on the 10th. He's giving me the AQ2200d when it gets here. I feel so bad for the guy. Heres the original thread. http://forum.ecoustics.com/bbs/messages/4/491237.html

Finally! I have had these panels cut and painted for well over a month now, just finally finding a little time to get it finished so we can get the Icon Packages up on the site with some pics. This will be the "standard" enclosure that will be offered with the SSA/FC combo.

Not sure on the driver that this will be paired with for sure. This will be double baffled, with driver firing forward and port up. Pics...

Simple little box here, no carpet. Onto the pics...

I have 2 dual 12" Alpine Type R's...I've been told that ported is the way to go for these subs. There is a problem though. My trunk is small as well as the trunk opening. Right now I have a crappy sealed box 38"W x 10" TD 14" BD x 14" H...it has two old MTX subs in it right now. It was a pain to get in because the height of my trunk opening is 14" as well and the width is 35". I've made a few designs in photoshop but I'm not sure if they'd work due to my lack of knowledge in this area: I'm not sure how many cubic feet will be needed but I'd like the width to be around 30" and the height to be less than 14". Again...these are just some ideas...not sure if they'd work...…

5.75cf @ 38Hz for a AQ HDC318 Only difference that was made from the design was that he decided to level the floor himself, so the extra stuff you see on the bottom of the enclosure was omitted. This box was also left bare.

Just making sure this still works. Cause you just never know...

I am looking for ideas and opinions on an enclosure for my ranger. 02 Super Cab Ranger Edge. The plan so far is 2 BTL 12's but not sure about the enclosure. Once I pull the money together I will definitely be going for a fisher customs enclosure but need opinions on layouts for it. With my last setup I had the woofers firing upward and it did well but I also like to feel that punch in your back. So what I am looking for is opinions on some layout options for the port or ports and for the woofers themselves. I thought about firing them forward this time around but not sure. Let me know what you all think would perform and sound the best for this application. I want people…

This enclosure is not going to be like most I have done lately. We are insetting the front panels instead of the sides. He is wanting the front painted white and the port black. Will also be wrapped in black carpet. Here is the start:

Title has the specs. Will have a center located port, which will be painted red. Will get finished off in black carpet tomorrow.

This is a small ported box for a pair of 10" eD drivers. Will be getting the plexi engraved to say "Elemental Designs" as well. Should be a nice little box.

Finally back in the shop doing some boxes here and there. Here is my first build in over 6 months... Waiting on final specs from Dylan, but its for a quartet of 10" Fi Q's. Also will feature a plexi window with some engraving on it. Here are some pics of the build.

I have teamed up with Jacob to sponsor a raffle for a young kid in need of a bone marrow transplant. Basically, he has a rare skin disease, and if he doesnt get this transplant, he will die from skin cancer within 10 years. This certain procedure has only been done twice (IIRC) and therefore Kyle's insurance has deemed in "experimental" and will not provide any financial help. It is estimated that $500,000 is needed for the operation. Since May, nearly $200,000 has been raised. Much more info can be found here: http://cotaforkyleh.com/ I got the opportunity to meet Kyle recently, and this young man is amazing. He has such high spirits and is a very down to earth kid. Kyle…

......

2.5 cubes @ 32 hz. Flared por, double baffle and carpet. Here are the pics:

well bj inspired me, i want to build my own box just to see how it comes out im good with my hands so i think i can do it. i just want to know what kind of glue and screws to use for the build? Tell me your thoughts thanks a lot in advance Billy

This design has become quite popular lately. This one is 3 cubes @35 hz I believe, for a pair of 12" Nightshades. Will be using a 6" aero. Onto the pics...