Fisher Customs

Title has the specs. Will have a center located port, which will be painted red. Will get finished off in black carpet tomorrow.

Anyone have any ideas how to make my box slant at the top and bottom and port in the middle, box is 21 cu. will that work by the way?

Center located port, double baffle on the front. Pretty straight forward. Customer wants white port and black carpet. Should look nice when complete.

Just got a little start on this one, before I had to do a little painting I missed...

This box will feature a flared port, and a top mount double baffle. I believe it is for a pair of Type R's. Will be finished off with charcoal carpet.

This enclosure is a little different than most I do. It features a center port. Also will be double baffled and get covered in black carpet.

Got an enclosure for a single 18" Fi BL. 5 cubes @ 30 hz. Also, the customer wanted a plexiglass window installed on the front panel, and the driver top firing. Onto the pics...

Customer is actually on his way from Lincoln as we speak, to pick this up in the morning. 100 square inches of port with a dual flared port.

We have a big enclosure with a giant flared port. It will house a pair of 15" drivers, and also a couple plexi windows. Here are the build pics so far...

I sure have been building a lot of large boxes lately. Im kind of ready to get back to some smaller ones... haha. This one is with a side firing port. I have done 2 other enclosures for this customer with the same port configuration.

I think the point of this box may be to get LOUD! He is coming down to pick it up early next week, so I might snap a few pics of it in the Blazer as well. Still have to add a Chevy Bow Tie to the front, then wrap it in carpet.

gonna take a shot in the dark but whats the chances of getting a box built for a 95 camaro for a xcon 15. i looked at some boxes on ebay n stuff but scared to try one. taking out the t-top rack will be no problem cause i rarely use it anyway. thanks in advance

hello how long does it take to make a Flared port box on average have you ever made a dual flared ported box? whats the furthest you have ship a box? whats the most used software you use? and were(from who) do you buy your carpet from? you must of work in a cabinet shop in the past? do you do this full time? ( box builder) thanks for your time

First off hello everyone. I have been browsing the forums for a while, and i really never post. I guess got a little too excited and sent payment for an enclosure before discussing it on here. haha the enclosure was for two alpine alpine swr-1222d's in a 4 cube enclosure @ 32 Hz. my question is, what would you (or anyone else) recommend for tuning. is 32 good enough for getting 'loud' and somewhat low on music? i also plan on firing towards the cabin and sealing it from the rest of the trunk. kind of like this A local shop quoted me ~$250, and they said the enclosure would sound better facing the rear? im not too sure about that one. what do you think? here's a lil…

Looking for an idea of price shipped for an enclosure that houses a pair of 12" Alpine type-r's (dvc 4ohm). Trunk space is 37Lx38Wx28H(height can vary but not to much more than 35"). Enclosure to be is a single box with dual chambers each chamber to be 1.7^3 ft. tuned to 33Hz. Kind of like "Model: 4.0@35Hz_12" pair on your site but different dimensions. Thanks for any help and great work all around from the enclosures to the site nice work.

He sent me the dimensions for the design, and its for a trio of Sundown E8's I believe. Straight forward design here, so here are the pics... Ill have it finished Tuesday I believe.

This is basically the standard box offered with the Icons, but had to change the orientation of the panels around just a little to allow for a flush mount. It will be finished off with carpet as well.

This design has become quite popular lately. This one is 3 cubes @35 hz I believe, for a pair of 12" Nightshades. Will be using a 6" aero. Onto the pics...

I know... I have been slacking with build logs. Here is another one I did sometime back in Feb. Pretty straight forward flared port box.

I saw on the website there are loaded enclosures with SSA subs but are there any with Fi subs? Perferably a 12" Q or Bl

Im thinking about ordering some more stock of Tshirts. They never really went over all that well, when I had them a couple years ago. But lately, I have been getting asked quite often when I would have them back in stock. I wanted to test the waters first, before I spent a lot of money ordering in a bunch of shirts. Who might be interested? Would you be willing to pre-order? The price will probably be around $18-20 shipped via USPS priority. Also, what sizes would I need. Last time I ordered M-XL, but had quite a few requests for other sizes (mainly bigger ones). So who would be game?

From fishercustoms.com? I ordered one and i still haven't gotten it. It isn't a custom one its just a 12 dollar dual 12 design. I thought it would be a direct download, am i missing something?

Finally back in the shop doing some boxes here and there. Here is my first build in over 6 months... Waiting on final specs from Dylan, but its for a quartet of 10" Fi Q's. Also will feature a plexi window with some engraving on it. Here are some pics of the build.

I have teamed up with Jacob to sponsor a raffle for a young kid in need of a bone marrow transplant. Basically, he has a rare skin disease, and if he doesnt get this transplant, he will die from skin cancer within 10 years. This certain procedure has only been done twice (IIRC) and therefore Kyle's insurance has deemed in "experimental" and will not provide any financial help. It is estimated that $500,000 is needed for the operation. Since May, nearly $200,000 has been raised. Much more info can be found here: http://cotaforkyleh.com/ I got the opportunity to meet Kyle recently, and this young man is amazing. He has such high spirits and is a very down to earth kid. Kyle…

well bj inspired me, i want to build my own box just to see how it comes out im good with my hands so i think i can do it. i just want to know what kind of glue and screws to use for the build? Tell me your thoughts thanks a lot in advance Billy