Fisher Customs

This one is 3 cubes @ 35 hz for a trio of DD 1508's I believe. Used a pair of 4" precision ports and had to put an elbow on each. Box will be left bare and have all edges rounded over.

This is a small ported box for a pair of 10" eD drivers. Will be getting the plexi engraved to say "Elemental Designs" as well. Should be a nice little box.

I am looking for ideas and opinions on an enclosure for my ranger. 02 Super Cab Ranger Edge. The plan so far is 2 BTL 12's but not sure about the enclosure. Once I pull the money together I will definitely be going for a fisher customs enclosure but need opinions on layouts for it. With my last setup I had the woofers firing upward and it did well but I also like to feel that punch in your back. So what I am looking for is opinions on some layout options for the port or ports and for the woofers themselves. I thought about firing them forward this time around but not sure. Let me know what you all think would perform and sound the best for this application. I want people…

BJ can we get any pics going for this build? love to see the progress thanks Travis 350zspl High Decibel Audio

Dont recall all the specs and whatnot for this one, but Im sure he will step in with some info. Little different design, which is nice to build every now and again. Here are the pics from tonight...

Can you make a box according to these specs? I got it from someone's past build. I want it to be center ported. And how much will it cost shipped to zip code 30047? Specs: 2 SSA Icon 15s 22"H x 42"W x 20"D, 8.889^3ft gross, 7.837^3ft net with a 20.5" x 4" x 15.4"long port Center ported *Tuned to 31hz or 32hz? Black carpet, double baffle Is this a good box or is there better specs you can get? I like the 20" depth though because I can have more trunk space in my explorer. How much also would it be if I bought the 2 icons from you as well? Thanks

2.5 cubes @ 32 hz. Flared por, double baffle and carpet. Here are the pics:

Pretty straight forward box here. Center slot port, no carpet. 4 cubes @ 32 hz for a pair of 12" Type R's.

Its for a 12" Fi Q. 1.8 cubes @ 32 hz. Flared port, flush mount baffle, and carpet. Here are the build pics:

This is a little different build than what I have done before. The box is for a 12" SSA XCON and will be going in his Scion TC. Due to him having an amp rack and extra battery already in the back, we were slightly limited with space. Dylan change up the design style a little bit, and I will allow him to explain it. But from my knowledge, its basically a ported box with a loading chamber. Onto what is done so far...

whats a good enclosure for 2 12" kicker cvx subs? how much would one cost, also.. i have a drawing for a good ported design, how much would it cost to get the box made up of the drawing i have?

Its that time again! We had a good turnout for the last raffle that ran towards the end of 08. Had a lot of people ask to do another one. Even had some more vendors step up to help out with prizes. Rules will be the same as last one. Tickets will be purchased for $1 per ticket, with 100% of the profits going directly to Kyle's cause. Tickets will be available starting March 11th. The actual drawing of the raffle will start April 1st, but tickets will still be sold until all prizes have been awarded. Just like the last one, 1 name will be drawn each day, until a name is drawn 3 times. Little new info on Kyle... They currently have raised over $255,000 towards the needed $5…

I know... I have been slacking with build logs. Here is another one I did sometime back in Feb. Pretty straight forward flared port box.

This build is a little past due on posting it up. I think it was delivered yesterday. But here are the build pics on it. Apparently, I didnt take final pics of it either.

This is for a Trio of of Sundown E8's I believe... Final pics.

J/K, can't wait to see john's build. Hope you two are staying warm out there in KS! It's nice and warm here. lols. I want pics immediately also!

So here are the first cuts. I finally had a few minutes in between studying for tests to make some progress. This is a varient if the center port 2-12" box that I had modified to better fit my trunk. I am by no means a wood worker, so don't pick on me too much. I need some assistance with the angles though. I have never done angled ports before, nor have I done a center port. Can anyone from Fisher Customs help me with setting things up? I would greatly appreciate it. If you need me to copy the email so you know the demensions, just let me know. Chris

everytime i come to the ssa forums i always come to check out this box http://www.soundsolutionsaudio.com/forum/i...showtopic=22072 ... i will be running 15 nightshades soon as i get the 12's reconed to 15's. that box is ideal of what i am trying to get built but instead i want my subs and port facing back with the plexi windows on top... my zip is 70501

First off hello everyone. I have been browsing the forums for a while, and i really never post. I guess got a little too excited and sent payment for an enclosure before discussing it on here. haha the enclosure was for two alpine alpine swr-1222d's in a 4 cube enclosure @ 32 Hz. my question is, what would you (or anyone else) recommend for tuning. is 32 good enough for getting 'loud' and somewhat low on music? i also plan on firing towards the cabin and sealing it from the rest of the trunk. kind of like this A local shop quoted me ~$250, and they said the enclosure would sound better facing the rear? im not too sure about that one. what do you think? here's a lil…

I need a 1 cube box tuned to 32hz for my single L7 8! Right now its in a .43 sealed.

He sent me the dimensions for the design, and its for a trio of Sundown E8's I believe. Straight forward design here, so here are the pics... Ill have it finished Tuesday I believe.

I am just curious to know what the difference between flared and standard slot ported boxes. Obviously outside of appearance is there any performance difference???? I am looking for a nice ported enclosure for my 12" AA Havoc.

Dont recall the exact specs. Just know its for a pair of 15" Fi Bl's. Subs up, port facing back. Charcoal carpet, with Dylan's little flavor on the top panel. Here are the complete build pics.

Here we have a box for 8-10" drivers. Dont recall what subs he is running, and dont have the specs of the box with me. Maybe Dylan will step in with those. Using a pair of 6" ports for the vent, and all the subs will be flush mounted. Doing something a little different than usual. Might be a challenge to carpet, we will see tomorrow. Onto the pics...

I am looking to have a design built for my future system. I am buying 2 Digital Designs 9518g's for my Hummer H2 (SUV) The max dimensions I have to work with are 27 length, 34 height, and 46 width. I want it to be musical but at the same type move a LOT of air. If possible, id like to be able to run a 149.9 in bass race with it but I am not willing to sacrifice quality to make it sound like a fart box. I will be powering them with 5k watts. Please PM me if you think you can do it..