Fisher Customs

This is a small ported box for a pair of 10" eD drivers. Will be getting the plexi engraved to say "Elemental Designs" as well. Should be a nice little box.

This is a build for a 12" Incriminator Audio Lethal Injection. Customer wanted the same design as I had used in the past for the same driver. Might even be going in the same type of vehicle as well. Here are the pics so far...

I believe this is for a single 15" Nightshade. Will be finished off in black carpet.

Feels good to get in the groove again. This is a pretty straight forward build for a local guy here in Wichita. Will be finished off with black carpet in the next few days. Onto the pics...

This is a build for 4- 8" L7's. Customer sent me design specs, I believe around 3 cubes. He will be installing the 6" Port himself. Here are the pics...

Its for a 12" Fi Q. 1.8 cubes @ 32 hz. Flared port, flush mount baffle, and carpet. Here are the build pics:

Hey bj i am looking at putting a fully loaded 10" FI BL in my standard cab silverado 2000 - 2006 bodystyle. The dimensions i would have would be around 40.0"W x 15.5"H x 7.5"D. It would also have to be a wedge type enclosure because it is going behind the seats. Something like this but 1 10" sub and ported to around 32-34 hz is what i was thinking. Also, what are the advantages/disadvantages to running aero ports vs slot ports. I was thinking of running 1 or 2 aero ports out the top of the box. Please let me know if you have any suggestions about the port, tuning, or anything else. Edit: Forgot to mention i am going to be running a SAE-1000D to it. What would you reco…

This one will be 2.2 cubes @ 32 hz I believe. The customer sent me his own design. Will be finished with medium gray carpet. Pretty straight forward build here...

I am looking to have a design built for my future system. I am buying 2 Digital Designs 9518g's for my Hummer H2 (SUV) The max dimensions I have to work with are 27 length, 34 height, and 46 width. I want it to be musical but at the same type move a LOT of air. If possible, id like to be able to run a 149.9 in bass race with it but I am not willing to sacrifice quality to make it sound like a fart box. I will be powering them with 5k watts. Please PM me if you think you can do it..

Can you make a box according to these specs? I got it from someone's past build. I want it to be center ported. And how much will it cost shipped to zip code 30047? Specs: 2 SSA Icon 15s 22"H x 42"W x 20"D, 8.889^3ft gross, 7.837^3ft net with a 20.5" x 4" x 15.4"long port Center ported *Tuned to 31hz or 32hz? Black carpet, double baffle Is this a good box or is there better specs you can get? I like the 20" depth though because I can have more trunk space in my explorer. How much also would it be if I bought the 2 icons from you as well? Thanks

Here we have a box for 8-10" drivers. Dont recall what subs he is running, and dont have the specs of the box with me. Maybe Dylan will step in with those. Using a pair of 6" ports for the vent, and all the subs will be flush mounted. Doing something a little different than usual. Might be a challenge to carpet, we will see tomorrow. Onto the pics...

Alright Im in a bit of a dilema. I cant for the life of me find someone to build me a GOOD ported box for a 1993 camaro. Im wanting to get 2 fi BL 12's and a ported box made for their specs...but I can only find prefab boxes and their still just SEALED.... So I got reffed to you guys and im hoping you can help me out here. Now I know unless you guys already done a build for a 1993-xx camaro you will need measurements...just try to lemme know exactly what to measure. http://www.subthump.com/acamarowell.htm http://www.cardomain.com/ride/2303185 Now I want it ported and subthumps are all sealed...just putting it here to give you an idea of what the trunk looks like and diff …

This box is going to be so kickass. dylan is awesome at designing this thing, i wont post the rough pics unless he says its alright, but I'd be interested when this bad boy is built, to see a build log of it! Thanks BJ and dylan for all the time and work you've already put in!

Hey BJ, I'm Going To Get Brian To Make Some Designs Up For Me, So We'll See How That Goes, But I'm Definitely Using You As The Builder. Damn Glad I Live In Kilgore So I Can Just Pick It Up Instead Of Pay Shipping For This Box And The 28 Cubic Foot Beast Im Gonna Need Later.

I had filled out the contact form on your website and haven't received a response. Please let me know if you are still doing box work. My name is Travis and my number should be listed in the form I sent.

This is a little different build than what I have done before. The box is for a 12" SSA XCON and will be going in his Scion TC. Due to him having an amp rack and extra battery already in the back, we were slightly limited with space. Dylan change up the design style a little bit, and I will allow him to explain it. But from my knowledge, its basically a ported box with a loading chamber. Onto what is done so far...

Hey whats up im doing a build for my ROOM for music haha. I have a sub in my car why not at home. Ok So i bought a RE SR10-D4 10", here are the specs. I want to Make a slot vented box 1.5cf tuned 34 hz. people in the other forums said that the tuning will be too high for my room my room is 12'x9'. what are your views on it? I am going to put 300 rms. Ive built boxes before But i still dont know how to design one on my own so im asking for you guys to help me with the build could someone design a box for me i want the sub to be top mounted with the port on the side. I just need a cut out sheet with the dimensions of the box. billy Specs of the sub * Kraft Pulp Cone * Ruba…

i was wondering if u can draw me up something with dimensions and all , that would be the perfect ported box for 2 nightshade 15"s?

hey what size would you recommend for 2 xcon 15s and 2 sundown 1500s going in the back of a 2005 dodge quad cab truck. my MAX measurement on width is 57" and on depth is 24". height is flexible but i dont want it blocking the window lol

do you guys have any experience with boxes that go underneath the back seats in a dodge ram that is between the years of 1994-2001? thanks!

This will be the enclosure offered with the package deal. I will get some shots of the drivers installed in this once I get it all completed. Box is 4.25 cubes @ 32 hz. Standard slot port, double baffle and charcoal carpet, on this one.

Can a pair of Fi Q15's be ported and tuned to 30hz in a properly sized enclosure, if my max external dimensions are 22" (d) x 19" (h) x 38.5" (w)? Less height and depth if possible... I was planning on running them sealed, since I know they have great lowend sealed, but if I can still have great lows with more output, I want to got for that.

I would like to purchase plans for a home theater subwoofer enclosure. The active driver is a TC Sounds 15" tc-3000 and will use 3 passive radiators. (2) 15" TC sounds VMP Passives and (1) 18" TC Sounds VMP Passive. I'm thinking a 25" cube with double baffles all arround. Internal bracing can be window type like I've seen in your other designs. This is my basic vision. Please don't hesitate to contact me if you need more information. There wasn't an option on your website to purchase a design for a passive radiator enclosure therefore I decided to contact you first. I look forward to hearing from you.

This is a sealed box built to JL's specs. Will end up being bare.

i need a ported box 4.0 cu ft tuned at 32hz for a single 15 Q, is this a good enclosure for one? also is the crx style good? how much am i looking at? i need it shipped 2 houston. who can i get in contact with?