Fisher Customs

Where do i go to place my order???

This enclosure is a little different than most I do. It features a center port. Also will be double baffled and get covered in black carpet.

I am in need of i box. I'm going to purchase 3 kicker CVX 15's and i want a quote on a box I had a guy eyeball me a design and send it to me it's a really good description of what i want im not sure if the specs are correct because he just eyeballed it my car is a 1994 grand marquis and i measured my trunk its 3ft 4in in length also 4ft 9in in length if the design is like the one in the pictures below it's roughly 1ft 11in from bottom of trunk to the top and roughly the same in width from back to front.

I have the design, the dimensions and everything. I just need it built and shipped. Need to know pricing info and other details if possible. Thanks.

I'm looking for plans or a possible build for my Stereo Integrity BM10. I have a LMI welding seat lift in my truck right now so I may have sufficient space under the seat. To fit it would need to have a wedge shape with dimensions of 30" wide, 17" deep, 10" tall on the front, and slanted down to 5" tall at the back. I'm over in Wichita so coming to pick up wouldn't be too far for me. I tried requesting the quote at the website but it says product not found. Here's the specs for the sub. [T/S Parameters: Re (coils in series) Fs 27.1 Le 3.38 Qms 3.08 Qes 0.31 Qts 0.29 Cms Mms 101 Vas 52.5 Sd BL 21.7 SPL 87.4 Displacement .1 ft^3 Recommended enclosures: Ported 1.5 ft^3 t…

Hi, I am buying a 15"Xcon sub these days, and I need a ported box design. I would love to order it from FC, but I live too far away, shipping costs would be HUGE ! I'm in Martinique, in the French Caribeeans! I have the dimensions that I can afford in the car : 35cm(H)* 49cm(L)* 80cm(l) 14" * 19.6" * 32" What can I expect? How to have some real good plans? I don't want to use round pvc tube ports this time, so I will not be able to re-adjust the box; no mistake permitted with this kind of design ! I know you sell the plans on your site, but I want to have some informations before ordering anything. Waiting for you Thanks Alain aka Notorious !!!

This one will be 2.2 cubes @ 32 hz I believe. The customer sent me his own design. Will be finished with medium gray carpet. Pretty straight forward build here...

Anyone have any ideas how to make my box slant at the top and bottom and port in the middle, box is 21 cu. will that work by the way?

do you guys have any experience with boxes that go underneath the back seats in a dodge ram that is between the years of 1994-2001? thanks!

This is the standard enclosure offered with the Icon package. This was built early last week for a customer who already has an Icon I believe.

This is a standard 4 cube sealed box for a pair of 12" (BL's maybe). The customer will be lighting the front with a neon, and wanted a little home for it to direct the light down the front side of the box. It will be left bare, and be color matched to the vehicles interior later on.

Found this add on criagslist thought id point it out. FS: 2 10" Powerbass Xtremes in Custom Aeroported Box

Hi FC, Just wondering about getting an enclosure and a cut out sheet for another one from you. I send an email to you from the site a couple days ago and have not heard anything. I know you guys are probably quite busy, I just wanted to make sure that you got my email. Hope it was ok to post this here. If not I am sorry. I would love to get an enclosure done by FC and it would be a tricky task. That is why I am not gonna attemp the big one. Thx Josh~

This is a build for 4- 8" L7's. Customer sent me design specs, I believe around 3 cubes. He will be installing the 6" Port himself. Here are the pics...

I have a 2007 mustang coupe with 2 12" audiopipe TXX-ap12bl in a bassworx pre-fabed enclosure right now..they sound alright in it..get pretty loud..but i want a custom enclosure for them..there powered by an audiopipe ap15001d..im looking for spl..and in a good enclosure..i belive these subs can do just that..now the only problem is the trunk opening on the new stangs...are a little tight..i had to do some fabrication in my trunk to get the box i have in there now..but i was thinking somthing like a 3.5cuft enclosure tuned at around 34-36hz..

shopping around for some prices, need a enclosure for 3 18'' 6 cu ft each, sealed, going in a 2002 yukon denali, took the 3rd row seat out so im willing to use all the space i have back there

need a boxbuild design for 2 audioque hdc's 12's for a 03 crown vic tuned to 34 hz using aeroports

Just wanted to ask what an eta would be on my box design, i ordered last night so im not expecting 24hr service or anything, i just want to get an idea of when it might be done, nothing complicated, ported at 29hz with double baffle flush. But i will be getting my subwoofer soon and i wanted to know when i should be ready to make it. Thanks

whats a good enclosure for 2 12" kicker cvx subs? how much would one cost, also.. i have a drawing for a good ported design, how much would it cost to get the box made up of the drawing i have?

I have an 05 camry and am planning on purchasing a FI Bl. I have more than enough room for the overall cubic feet for the box. My concern is the height. there is a bar in my trunk that is a little over 17 inches above the trunk floor. If i were to move a potential box forward towards the trunk lid, I could gain an inch or two in height. If the sub is vertical, firing forward toward the trunk lid, how tall would the box need to be? Also is is sub forward the best layout for my space? Haven't even thought about port direction yet. I'm kind of a noob at this

I had filled out the contact form on your website and haven't received a response. Please let me know if you are still doing box work. My name is Travis and my number should be listed in the form I sent.

Hey bj i am looking at putting a fully loaded 10" FI BL in my standard cab silverado 2000 - 2006 bodystyle. The dimensions i would have would be around 40.0"W x 15.5"H x 7.5"D. It would also have to be a wedge type enclosure because it is going behind the seats. Something like this but 1 10" sub and ported to around 32-34 hz is what i was thinking. Also, what are the advantages/disadvantages to running aero ports vs slot ports. I was thinking of running 1 or 2 aero ports out the top of the box. Please let me know if you have any suggestions about the port, tuning, or anything else. Edit: Forgot to mention i am going to be running a SAE-1000D to it. What would you reco…

I tried to make an order a little bit ago through the website. And after I put my address, and went to go to the payment method, it says that you are not currently shipping to my area. Is there something that you have against Illinois? lol no, but seriously, I was wondering if I could be informed on the situation, and if you'll ever be shipping to illinois? thanks

I've seen a video, with a box made by you guys. I must say... impressive. Do you by any chance, know the dimension used? It was a 15 FI in a Charger and the box was made by FC.

hello how long does it take to make a Flared port box on average have you ever made a dual flared ported box? whats the furthest you have ship a box? whats the most used software you use? and were(from who) do you buy your carpet from? you must of work in a cabinet shop in the past? do you do this full time? ( box builder) thanks for your time