Fisher Customs

This is the twin of the other sealed box with the Passive Radiators I did today. It will also feature a raised "G5" logo on each side panel, and will be finished with carpet.

I believe the specs were 1.4 cubes per sub, and the customer wanted separate chambers. Pretty straight forward build here. Actually got the entire box assembled, just didnt take any extra pics. Ready to be sanded and covered with carpet.

Ok, so I just bought this box from someone local and I didn't take certain things into account. Regardless, it won't fit for me. I'm too tall and its too deep. The height and width are fine but I need something a few inches narrower. So what would a similar box like 3+/- on so inches narrower sub/ port up cost? The box is amazingly well built and sounds great, I just don't like kissing the steering wheel lol. It's for a LVL3 12 on about 700 watts for now. I'll switch that out later to something that's a dual 2 eventually to use my amps full power potential. Thanks! http://i228.photobucket.com/albums/ee174/kirbycamry/RSXBOXNEWcorner.png http://i228.photobucket.com/albums/e…

Is it possible to make a similar box for 2 12" IDQ subs? I have a 2008 Mustang. Thanks!

I have the design, the dimensions and everything. I just need it built and shipped. Need to know pricing info and other details if possible. Thanks.

I know you list prices but I would like it slightly custom. I am planning on buying a Mag v4 when they come out and want a box for it but I absolutely suck at building them. The Mag v4 has .07 cubes of displacement. How much would it cost for a slightly custom 1.07 cube net, 1.0 cube after displacement box with carpeting and 2 sets of terminal each wired up so I can directly connect to each voice coil on the Mag v4?

Hey bj i am looking at putting a fully loaded 10" FI BL in my standard cab silverado 2000 - 2006 bodystyle. The dimensions i would have would be around 40.0"W x 15.5"H x 7.5"D. It would also have to be a wedge type enclosure because it is going behind the seats. Something like this but 1 10" sub and ported to around 32-34 hz is what i was thinking. Also, what are the advantages/disadvantages to running aero ports vs slot ports. I was thinking of running 1 or 2 aero ports out the top of the box. Please let me know if you have any suggestions about the port, tuning, or anything else. Edit: Forgot to mention i am going to be running a SAE-1000D to it. What would you reco…

Just wanted to ask what an eta would be on my box design, i ordered last night so im not expecting 24hr service or anything, i just want to get an idea of when it might be done, nothing complicated, ported at 29hz with double baffle flush. But i will be getting my subwoofer soon and i wanted to know when i should be ready to make it. Thanks

I would like to purchase plans for a home theater subwoofer enclosure. The active driver is a TC Sounds 15" tc-3000 and will use 3 passive radiators. (2) 15" TC sounds VMP Passives and (1) 18" TC Sounds VMP Passive. I'm thinking a 25" cube with double baffles all arround. Internal bracing can be window type like I've seen in your other designs. This is my basic vision. Please don't hesitate to contact me if you need more information. There wasn't an option on your website to purchase a design for a passive radiator enclosure therefore I decided to contact you first. I look forward to hearing from you.

Nice simple naked enclosure here. Knocked it out today. Onto the pics.

I just sold my old box and kove subwoofer, So I am in need of a new enclosure for my new 15' ssa xcon, I would love some pictures of a enclosure that you have done that is similiar to this so i can know what kind of craftsmanship I can expect on it. Here is the link I am looking for someone to build a Enclosure - SSA Car Audio Forum - Page 2

hello how long does it take to make a Flared port box on average have you ever made a dual flared ported box? whats the furthest you have ship a box? whats the most used software you use? and were(from who) do you buy your carpet from? you must of work in a cabinet shop in the past? do you do this full time? ( box builder) thanks for your time

Where do i go to place my order???

I tried to make an order a little bit ago through the website. And after I put my address, and went to go to the payment method, it says that you are not currently shipping to my area. Is there something that you have against Illinois? lol no, but seriously, I was wondering if I could be informed on the situation, and if you'll ever be shipping to illinois? thanks

I just bought 2 Sundown SA-12's and I need a new box for em. If you wouldn't mind drawing up something for me I'd greatly appreciate it. My trunk dimensions are 40inWx20inHx17inD. Im looking to go 3.5 cubes ported @ 30hz. Thanks, Steve

OK im looking for a box that will hold 2 diamond audio D3-12s. Im looking for something that will wound good and also get fairly loud. The subs will be powered by a Massive P1000.1 amplifier. I was thinking of making an amp rack that would mount on the top of the Box if thats possible. If ported i was hoping for a slot port at around 33hz. Thanks for the help guys

Hello, I've posted a thread about this to another company... but no response. SO! Hopefully yall can help me out here. I'm looking to get a blow through bandpass design for 2 18" fully loaded BTL's. My truck is a 1986 GMC S15 and i will be powering them with 2 AQ2200. Looking for a quote please!!!! Thanks Dom.

Its that time again! We had a good turnout for the last raffle that ran towards the end of 08. Had a lot of people ask to do another one. Even had some more vendors step up to help out with prizes. Rules will be the same as last one. Tickets will be purchased for $1 per ticket, with 100% of the profits going directly to Kyle's cause. Tickets will be available starting March 11th. The actual drawing of the raffle will start April 1st, but tickets will still be sold until all prizes have been awarded. Just like the last one, 1 name will be drawn each day, until a name is drawn 3 times. Little new info on Kyle... They currently have raised over $255,000 towards the needed $5…

From fishercustoms.com? I ordered one and i still haven't gotten it. It isn't a custom one its just a 12 dollar dual 12 design. I thought it would be a direct download, am i missing something?

I know... I have been slacking with build logs. Here is another one I did sometime back in Feb. Pretty straight forward flared port box.

Very simple sealed box here, wanted to post the pics up for the customer.

whats a good enclosure for 2 12" kicker cvx subs? how much would one cost, also.. i have a drawing for a good ported design, how much would it cost to get the box made up of the drawing i have?

I am about to buy a DC Level 4 15" and I want to build a box. But, I want you guys to design it for me (yes, I will pay, haha). It is going into a hatchback. It will probably be 3.5 cubic feet. So my question is, whats the best way to have the sub and port positioned? Thanks. Also, what do you think is the best tuning? I was thinking maybe 35hz since I listen to about every type of music.

Can you make a box according to these specs? I got it from someone's past build. I want it to be center ported. And how much will it cost shipped to zip code 30047? Specs: 2 SSA Icon 15s 22"H x 42"W x 20"D, 8.889^3ft gross, 7.837^3ft net with a 20.5" x 4" x 15.4"long port Center ported *Tuned to 31hz or 32hz? Black carpet, double baffle Is this a good box or is there better specs you can get? I like the 20" depth though because I can have more trunk space in my explorer. How much also would it be if I bought the 2 icons from you as well? Thanks