Argent Audio

Three sides together: Port Piece: Group Shot!!!

at last i got a great surprise in the mail today....it was wrapped up in a mopar box so i was like wtf is that .....then i opened it and it was my box as always it is extremely well made thanks Andrew and i hope all is well.

Andrew I pm'd you,and you suggested to start a thread so here goes. I have 36"w x 16"h x 19"d . want a ported box tuned to 32 htz. I'm trying to fit 2 12" IA lethal injections port and sub back or 1 15" xcon sub up port back. dont know if i have the room to get a box built for either. If not I would like a box for single 12" xcon sub and port back. maybe able to give a inch or 2 on the depth and height if you need it.

Andrew

Vehicle Make and Model: 94' Honda Accord Direct of Box/Subs: not sure what this means Sealed or Ported: Ported Number of Subs: 2 Brand and Model of Subs: SSA DCON 10" Max Dimensions: If you mean trunk space of the car I measured the best I could and came up with.. Height: 19 in Width: 52 in Depth: 38 in Port Color: Black Flush Mount Ring Color : Black Carpet Color: Charcoal Zip Code for Shipping Quote: 98387 Any other notes: I would also like a flush mount, double baffle, 45's in the corners, rounded edges and tuned to 30hz. Do you mean max dimensions of the trunk or the box itself?

More pics later tonight. Andrew

Aloha Argent Audio. Wanted to see if you've done any box builds for a Toyota tundra crewmax. I'll be removing the whole plastic wall behind the seats and relocating the jack to a different area of the truck. Don't want to lose a whole lot of leg room so I'm thinking of making the box the width of the backwall. If you've done any let me know because my measurements may be a little off but not by much. Vehicle Make and Model: 2007 Toyota tundra crewmax Direct of Box/Subs: forward Sealed or Ported: ported Number of Subs: 2 Brand and Model of Subs: sundown sa10 Max Dimensions: 48"L x 24"H x top depth 5"in x bottom depth 8"in (max) Port Color: black Flush Mount Ring Colo…

Using a local CNC for now till we have $35-$60k to buy our own The entire box was cut out in about 4 min (cnc was running 2/3's speed). Andrew

No progress pics on this one, just the last stages. 3.5 @ 33 HZ (2) 4 inch aero ports out the side This box will also be for sale soon. Andrew

The image shows the dimensions, I would like black carpet. I sent you a pm about this a couple days ago and you were saying something about flush mount being an issue due to the one length How much would this cost? thanks

More to come in a bit. Andrew

I bought my sister a DCON for her birthday, and haven't had a chance to get around to building the enclosure for her. As we all know, it took me a year to get the Van done, I don't want her to wait any longer for the DCON. I have already designed the enclosure, just need a quote to get it built, finished in standard charcoal gray carpet. Dimensions, measurements and design are as follows. THANK YOU for the help here. Hopefully I can get this taken care of before her birthday rolls around AGAIN!!!

I'd like a quote on a box measuring 17in Depth x 37inW x 15inH, 3.5 cubes, 30Hz, flush mounted. Thanks. Let me know if any dimensions need to b adjusted. Thanks

1.59 cubic feet box for 2 JBL P-Series 10's. Fill the box with medium fiberglass fill, at 100% fill. The dimensions of the hatch are: Max Dimensions: (measured as how physically big something can fit into the trunk with the hatch open without touching anything around it) Height: 28 in Width: 42 in Depth: 13 in Port Color: Black Flush Mount Ring Color : Black Carpet Color: Charcoal I will enclose pictures for clearer observation later today.

More pics coming later today. Andrew

Andrew

Hello i was told by a friend that this is the place to be to get very good box made. I have a 2002 Toyota Camry and need a box for a single sub i have a 12" Alpine Type-R (SWR-1243D) My friend knows a little more than me and says that the specs are 2.2 cubic feet tuned to 34hz, and it should have a double baffle and flush mount. im not sure how big or small i should go with the box, but smaller the better so i can have some room in my trunk. Im not sure if i should go ported or sealed. I want it to sound the cleanest it can, instead of just being really loud. zip code: 63130 my email if any questions: [email protected] im new to this site so just let me know if there …

I would like to get a box built for my 12 RE XXX (year 2008 I believe) Vehicle Make and Model: 2007 civic si coupe Direct of box/sub: rear firing Ported 1 sub 12'' RE XXX Max dimension: 40 (W) x 30 (Depth) x 17.5 (H) zipcode: 95122 (I can pick up in Gilroy) I would like to have it tuned to 4.0cubic ft @ 33hz, go low. If you have a better suggestion for the best tune, please feel free to let me know. The box should also have double baffle and flush mount. Please give me quote for one with carpeting and one with just flat black paint. Thanks.

Andrew

Andrew

The KH501 Series subs will be arriving shortly. It will be offered in 10's, 12's, and 15's. Our best estimated arrival on these is the middle of March. We will be starting a pre order this weekend with special prices After the pre sale they will be sold at the following prices on our website: 10 - $154.99 12 - $164.99 15 - $179.99 T/S below are for the 12 inch in D2 Coils, a D4 model will also be available Fs 30.9 Hz Re 1.55 Ohm per coil Qms 5.29 Qes .47 Qts .43 Mms 161.1g Cms 1.593 mm/N Sd 480 cm^2 Vas 51.4l Bl 14.6 N/A Xmax 17.5mm 500 Watts RMS How it started out.... We added woven leads, AL dust cap, magnet boot

Its for the back of a 09 Ram 2500 single cab. Pic below of what I've come up with. My sketchup skills suck unfortunately. Just a single 3/4 baffle and a single full length 4" aero. Subs forward, port to the drivers side (its on the wrong side in my crappy sketchup image.) If my math is right, counting .1 of displacement for each woofer I should be close to 1.5 net at 35hz: 26.5w x 17h x 13.5 bd x 6 td Let me know if you have any better ideas, or if not what you need for the below box in gray carpet shipped to 80634. Thanks!

The back port piece is drying right now. Andrew

I need an enclosure for 2 Fi Audio SSD12 (Dual 1). This is going in a 2010 Dodge Charger. MAX size would be 32"w x 15"h x 20"d . What do you recommend and how much would that run me? Sub Info: DUAL 1 Sealed box: .7-1.2 cuft Ported box: 1.8-2.5 cuft @ 33Hz Sub OD: 12.500” Cut ID: 11.125” Mounting depth: 6.500” Displacement: 0.14cuft