Argent Audio

Tried emailing you a couple times but just figured to post it up on here. Vehicle Make and Model: 1992 Mercedes 190E Direct of Box/Subs: Sub back, port driver side Sealed or Ported: Ported (aeroport) Number of Subs: 1 Brand and Model of Subs: Sundown SA-12 D2 Max Dimensions: 32w x 14d x 14h Zip Code for Shipping Quote: 94015 Any other notes: 1.5 cubes @ 35hz. Double baffle. Can I get two quotes, one for a bare box (no carpet) and the other for the whole outside of the enclosure painted flat black. For sub/port orientation if you have a better idea to go with, there is a rear firewall and gas tank between the trunk and rear seats but there is an opening in the rear deck fo…

Vehicle Make and Model: 1998 Ford Explorer Direct of Box/Subs: Subs up, port towards drivers side. Sealed or Ported: Ported Number of Subs: 2 Brand and Model of Subs: Sundown Audio SA-12 Max Dimensions: 38 in. width, 18in. height, depth shouldn't be an issue (plus I forgot the measurement haha) Zip Code for Shipping Quote: 76708 Hey, I have a few special requests...I listen to a lot of slowed music (decaf etc.) and love bass around 27-35 hertz so I would like for the box to be tuned a little lower than what Jacob recommends. Probably 26, but whatever gives me the most balanced response and can still dominate between 27-35. I've experimented and found that when the ports a…

Vehicle Make and Model: 2009 Honda Accord Sedan Direct of Box/Subs: toward trunk Sealed or Ported: Ported Number of Subs: 1 Brand and Model of Subs: Ascendant Audio 12" Havoc Max Dimensions: 2.5cf Zip Code for Shipping Quote: 12590 I talked with you multiple times of the phone. Just waiting for you to get all set up in the new shop. -Paul

Would like to get a quote for a carpeted, flush mounted, sealed enclosure. I have plenty of room but my max demensions to work with in my 2000 Celica is 23" Deep 15" Tall 42" Wide. Would like this enclosure to be around 1.3-1.5 cu. AFTER sub displacement

Subwoofer brand and model number- DC Level 4 Size of driver and quantity of drivers- 15"( and if 15 cant fit a 12") Amount of power you will be running- 1200w rms Make and model of vehicle- 1997 Acura 3.5 RL Maximum dimensions you have to work with- Width 35", Depth 37", Height 16"(pushing the height to the max) Desired goals with the design- Daily bumper would like to have it pounding and i would desire a ported box and the website says recommended,3.25³ ft (15") ;1.5³ ft (12") would prefer the 15" but if it cant fit im fine with the 12"

Just wondering how much a sub box for a fi bl 12 would cost ? Simple Lbox with carpet preferably a 2.4cuft @32hz I would like to know price with shipping, live in Cypress, Ca. 90630. looking to spend around 150 shippped. Im currently running out of money and i just need a box. Feel free to email me @ [email protected] for any information on quote and anything else you need to know about the box im looking for. this will be going into my 2007 toyota matrix. Thank you, Patrick

Hey I am wanting to know quotes for 2 boxes; both will be for my 12" FI Q. The first is basically what you built for the guy with the BTL with the 2.5 ported at 32hz and plexiglass. Also I would like to know about a box built the same with 2.5 cu ft ported at 32hz flush mounted but WITHOUT the plexiglass. These would be shipped to North Carolina when you calculate shipping. Thanks man!

Max dimensions are as followed... W/L/H 34"/20"/16" Want double baffle, flush mount, carpetted, tuned to 32hz,

Whats up... I planned on having a box built for my BL back around june but just went with a prefab box at my local shop which was a BAD idea. Cant stand how it sounds honestly and finally would like to switch it out for something tuned lower and slightly bigger. Car is an 08 scion tc, the trunk is extremely small so these measures are the absolute max for a box (including carpet/baffle etc..) Height= 17.25 Depth (front to back)= 16.65 Width (across)= 31.80 Its a hatch trunk and it curves around the corner so thats the biggest size box that can fit I believe. Considered doing Sub up port facing the rear to have a bigger box but I think i will play it safe and continue to h…

Wanted to do a build and still possibly keep my back seats the max dimensions I have are 38x35x27 didn't want it to go all the way to the roof if possible flared or aero ports is fine tuned btwn 30-34 hrtz

Yoo! So i was looking for a quote for a 1.2 cuft ported box for a 10" Fi Q. The Sub would face up and the port would face the trunk of the car with a plexi window, double baffle, and flush mount alomost exactly like this guys 12" btl but 1.2 cubes. Let me know how much that might cost me whenever you can Thanks Alot!!

I'd like a quote on a box measuring 17in Depth x 37inW x 15inH, 3.5 cubes, 30Hz, flush mounted. Thanks. Let me know if any dimensions need to b adjusted. Thanks

I bought my sister a DCON for her birthday, and haven't had a chance to get around to building the enclosure for her. As we all know, it took me a year to get the Van done, I don't want her to wait any longer for the DCON. I have already designed the enclosure, just need a quote to get it built, finished in standard charcoal gray carpet. Dimensions, measurements and design are as follows. THANK YOU for the help here. Hopefully I can get this taken care of before her birthday rolls around AGAIN!!!

I sent an email a little while ago, but I figured I'd go ahead and start a thread since I didn't see any hatch enclosures in here. I'm looking at getting a single 10" Dcon and need a semi-custom box built since the rear seats in the car are angled. My car is a 2005 WRX Wagon and I would like the box to rest against the rear seats in the trunk, with the sub facing the rear. I would like to keep as much trunk space as possible, while getting the most out of the sub at the same time. I would like flush mount, and possibly a double baffle (though honestly I have no clue what benefit this gives). I'm still debating on carpet since I love the rounded corner look. Here are …

I need an enclosure for 2 Fi Audio SSD12 (Dual 1). This is going in a 2010 Dodge Charger. MAX size would be 32"w x 15"h x 20"d . What do you recommend and how much would that run me? Sub Info: DUAL 1 Sealed box: .7-1.2 cuft Ported box: 1.8-2.5 cuft @ 33Hz Sub OD: 12.500” Cut ID: 11.125” Mounting depth: 6.500” Displacement: 0.14cuft

Hey Andrew, your 1st box is holding up great... Just not hitting the lows as hard as I wanted, mainly due to me keeping the box pretty small for a 15... I wanna go BIG this time, with as much volume and port area as possible ! Could you quote me on a new box? - Max dimensions are 34"Width x 18"Height x 20" Depth - I want to get 4 cubes if possible with 16-18 sq.in. of port area, 30hz - Sub/port back, no carpet, double baffle, regular port. Sub Info: Sub OD: 15.625” Cut ID: 14.125” Mounting depth: 8.500” Displacement: 0.19cuft Take your time, and thanks in advance!

Hi I am looking for a quote for my friend at work for a single 10" DCON or SA, going into a 06 Civic 4DR. He still wants his trunk space so the smallest size possible would be great (the least depth as possible). Also a kef port and charcoal carpet to match. I can probally do a local pick up since i'm in Fremont. Just a small reference to his setup...

Uploading more pics now. Andrew

Getting caught up on some custom orders... Andrew

The subs remain a surprise till later this weekend. We have 10.239 cubes @ 30.3 Hz. These things like large ported and sealed enclosures tuned very low. I decided to do the double flare for fun I had some spare 1 inch MDF left over so I'm going to use that for the baffle with a piece of .75 for the flush mount which is going to bring the total height to 22 inches which is perfect for the seat line of my Tahoe. On to the pics! Andrew

Ok here we go. This thing is going to be aero ports with two tunings. (4) 6 inch aeros @ 38 Hz for SPL competing and a second tune of (3) 6 inch aeros @ 32 Hz for daily driving. To achieve the daily tune Hove will be able to remove one port and close up the hole with a cap I am going to make. On to the pics!!!! Just getting started tonight... Andrew

Goes out to Argent, What would it cost for a box @ 4.5 cubes Approx: Depth: 19" Width: 32" Height: 17" Shipped to 08816 Thanks

We bought two pairs (total of four) bookshelf speakers that we were planning on doing a group buy for. Due to time constraints, we decided on not doing the group buy, therefore we are selling these. Great setup for an even better price. The specifications are below: -75 Watts RMS Per Speaker -6 Ohm Per Speaker -High Quality Cherry Cabinet -1 Inch Textile Dome Tweeter -Port located on the back -Magnetic screen The dimensions of each individual speaker are 13x14x8.5. The price is $385 per pair shipped anywhere in the contiguous United States.

Hey could I get a quote for a 1.5-1.6 Cu box, flush mount, aero ports(if possible for small box), tuning around 32Hz for 4 Re Rex 8's. Max dimensions right now roughly 20W-12H-20D. Thanks in advance.

Andrew