Videos

FOH, sorry but this has my Blair Witch, Paranormal, Cloverfield signature...Im gonna make you sick with motion. Scott, I didn't break the meter, I kept it below 129dB NO I did not sing at all, at the end I imitate Fred Durst after I turn it way down, it sounds like someone is there singing...isn't that the idea? This was the song I chose over a year and 1/2 ago to do my before/after. After, RS set to 120dB hitting +2dB: Before:

Decided to aim the subs up and try a few songs...

Heres a quick video of the system. Added zero gauge wire and now I just need to do big 3 which is coming in on Christmas. Seems a bit odd that I am not getting any dimming of my lights with the amp. Anyone know why?

http://www.youtube.com/watch?v=Sgabrbs4QF8 This video is of an Xtreme4 run in MidwestSPL. The sensor is placed 12" outside the car on the passenger side. It's a 30 second average on music. Just like a Meca Drive-by run, only closer mic placement. http://www.youtube.com/watch?v=4NBaN1bnmLM And a short vid from a month or two ago.

Ridiculous JAG... Not walled off or sealed from the trunk! Brutal Bass & Highs! Yelawolf - Trunk Muzik! Listen to the SOUNDZ!

Obviously alot more work left in this, sealing the cabin for starters But just a small vid of the flex, its currently 150 @32hz driver window open sensor on dash, alot more left in this

Watch in 720P for the optimal viewing experience.

Finally got it all tuned out and subs broke in.

Overall Dimensions: 50" wide x 40" tall x 20" deep Chamber Volume: 13ft^3 Tuning Frequency: 33hz Port Area: 188in^2 This is a dual 18" box going in the back seat area of a 2004 Toyota Tundra. The box will house a pair of 18" RE Audio SX subs.

Here's my setup I just finished. The sub is a Lanzar opti1532. Doesn't get loud on a meter, but sounds surprisingly well, and has some pretty good port velocity considering port size and woofer displacement. http://www.youtube.com/watch?v=qaDhEWHyt70

casey's latest build for a customer of his. did a box for 4 alpine type r 15s on a kicker zx2500.1 needless to say, its LOUDDDD! also, casey picked up this fi btl n3 12 fully loaded.... EVERYONE TELL HIM TO WORK A DEAL WITH ME!!!!!! hahaha heres a video i made of the alpine build and some free air of the n3 12 on a audiopipe 3k

This is a dual 10" bandpass box for a pair of RF T1 woofers. Each sub is in .75ft^3 sealed, firing into 1ft^3 tuned to 46hz. Dimensions are 34" wide x 17" tall x 17" deep.

Tell me what yall think?

This 4th order bandpass will be going in the bed of a 2008 single cab Chevy. Inside will be two of the new model Orion HCCA 15's. Each sealed chamber is 2.25ft^3 with a common 10ft^3 ported chamber tuned to 46hz. As you can see, there is a removable panel at the top of the box to access the subs, and the port is removable as well so that tunings and port size can be altered to custom tune the box.

Sorry for the dirty car.

http://www.youtube.com/watch?v=CxY-sGfpyPg