Leaderboard

XS Power Battery Group Buy - SSA Car Audio Forum

WOW !! very nice ...

Look like a good build.

Nice start!

and for you Sir-Lancelot im done now guys, sorry for the excessive posts

yea, ill try to keep them on the simpler side, and about the vectorizing part.. lol.. not 100% on what that means, i have saved all the photoshop .psd files if that helps 1 more

I think that all depends where you buy it. Here it's about $27 for a sheet of MDF vs $60 or so for a sheet of nice ply. Big difference, but in my opinion completely worth it.

5x the price is the only downside. Make sure you get VOID free. It is lighter and as strong. You still should use 3/4"

It's lighter, yeah. I'd say for a 3/4" piece of each, the birch probably weighs 3/4 as much as of a piece of MDF. If you're THAT concerned about saving weight, I see a couple areas where you could save tons of weight. That is, not using 596024389423984oz magnets with "bragging rights" power. If you want to use 120lbs worth of subs, saving 20-30lbs on the box ain't much in the grander scheme of things. And what are "nsb90s" and why do they weigh 160lbs? Running 2 normal 15s would save sooooo much weight...even heavy JBL GTi15s weigh like 35lbs each and can't bottom out due to their design. Go to the HDizzle or whatever store is in Canadia and lift a couple ready panels side by side. The 2x4' pieces are easier to lift at once versus 4x8' sheets

mine are dual 2ohm's.... the strapped SAZ's will like it better that way. 2009 WMD2 18 D2 T/S parameters in series no break in: FS 37.68 hz Qms 6.131 Vas 3.133 cft mms 461.30 g re 3.87 ohms Qes .959 SPL 88.84 db SPL 1w/1m pdia 403.4 mm Qts .829 Le 1.05 BL 21 uh, 1500 rms, 55lb. motor, 300oz. ferreit weight...., 19mm of xmax, 4 layer coil, ..... edited: okay, i fixed the specs....to dual 2ohm now.... i gotta look up the rest, i forget...

Do the Big 3 in 0ga, buy either the D3400 or D2400 and after that i don't see why you would have any trouble with dimming lights, but there is always a chance. You should buy a Stinger Voltmeter and install it so you can keep an eye on it but with a batt rated to handle 2500 watts as a starting batt and your running a 1500 i see no prob. EDIT: might consider going with a smaller batt if you only have a stock alt.. you should consider buying a high output alt.