Leaderboard

I guess I need to call Vance and order a few hundred cookbooks and start giving them out for free with orders.

Look at my thread on "port location,need opininions"Q post some good info on how to use the calculator on 4th bandpass. http://www.soundsolutionsaudio.com/forum/topic/61666-port-locationopinions-needed/page-3

I've bothered that poor man more times than I'd like to admit and he always comes through. I would take his recommendations on the Ethos' as gospel. C/S at its finest. Quoted for THE TRUTH. Quenten is da man.

I've bothered that poor man more times than I'd like to admit and he always comes through. I would take his recommendations on the Ethos' as gospel. C/S at its finest.

Well, there's at least a little light. I was just a little curious as the product line was cut down a bit. I was just guessing they were slowly closing product out. As material costs continue to rise, and the race to ZERO with cheaply built off the shelf rebadge brands popping up left and right, it is more and more difficult to compete. Which is making it ever more and more difficult to justify keeping the doors open at American made brands. Hence the slow disappearance of the smaller models of lower profit. I find this so frustrating. So many cheap garbage clone companies popping up lately. It's to the point that any 20 something can order clones and start a company with a new logo and semi-different heatsink and the kiddos blow them like they've developed the latest and greatest thing. That's the problem with our country now. There is NO innovation. The good companies develop great products and then get undercut by small-fry startups that don't even have a buildhouse, just a single rollup where they take orders and wait for a boat/truck to arrive. Thanks for ruining our once great country.

If you dont understand 4th order bandpass enclosures then you wont understand the port. Plain and simple

Same chick

Squats, lots of squats!

T-nuts bother me when they fall off or when the sub cutout isn't much smaller that the mounting hole diameter. If you want to go deeper, how many times is a sub removed/installed? With all that in mind, I've used T-nuts on the RLi enclosure

see dog thats why my subs are louder.. minz has 4 ohms and yourz only haz 1

project today. Got the nexus 7 ready to install

Yes^^ And remember, Re is just the DC resistance of the wire the coil is made of. It has little to do with what load the amplifier sees. In reality, an amplifier will never under any circumstances even see a load as low as Re due to losses in the interconnect cabling... It may be close, but it will always see just above Re and higher... The only way to see the actual load (excluding interconnect cabling) is to model the driver in your enclosure, as the enclosure is the #1 contributor to a majority of the load your amplifier sees...

Blowjobs or money? You three?

I would like to know your definition of a groundponder?

2 12s have more cone area than the single 15, 2 12s don't have a cone area of 24 inches either.

Do they have one that is written in English? Nope, it only comes in Nerd at the moment.

trollin