Leaderboard

Box is finished! Will get better pics tomorrow in the daylight. Just couldnt bring myself to bedline over that wood grain...

Since Im terrible at updating this one, heres what Ive been up to. Got 3 layers of glass on the mold and decided it was strong enough to come out. Edges were pretty scary. Trimmed it up with the dremel... Much better. So measuring the mold, I've got 24" to work with. So the problem is that each subs OD is 8.5", Aeroport OD is 7.25" and add 1/4" to each side bc of the flush mount rings. So I have to fit 25.75" in a 24" space. Once again 10lbs of shit in a 5lb bag <_< It was a little tricky to make all 3 rings fit, I tried center port but the hump from the wheel well would make my port length too short unless I stuck that ring way above the subs which would've looked terrible. So the port is on the side closest to the hatch. I wanted everything to fire up since I will be using the cargo area to transport my bikes. So the port is going to be slightly angled. This should leave me with right around 14-15" of usable port length. Got the fleece stretched over it. Took a while but was able to get all the wrinkles stretched out. Used a staple gun to secure it to the rings and then used 3m super 90 to get it stuck down to the glass while stretching and then used superglue to secure it to the glass. Then got some resin on it. this stuff will absorb a ton it ate up a little over 1/3 of a gallon. First coat Used an xacto knife to trim back some of the fleece around the edges after round 1. Second coat

There aren't any pictures, I don't understand without any pictures! What is all this reading nonsense!

Chat room? Where fhe pics?!

no need to continue arguing, i still feel you all are incorrect, but my method of trying to convey what i mean apparently needs to progress. i will leave this link to this video, that sums up what i was trying to say, at the 14 and 17 minute marks. http://www.youtube.com/watch?v=mjGLN_iMm9M