Leaderboard

Or just put linux on said cheap all in one and have it be faster and smoother than both the others

Ok so the first day I had these amps hooked up together I blew two fuses coming off the alternator. I happened to only have 2, 200amp fuses cuz that's all they had in the store when I got them. So I picked up a couple 300 put them in went fine for a day and a half and then I let some kids in the back seat and forgot to tell them about my RCA plugs so they broke one. By taking it and it was totally my fault cuz I didn't have it blocked off. But since then I've decided to change and run one amp per sub. today I went to a competition and after the competition I put it on term lab out of curiosity. At the beginning of the day I clamped it at 2591 watts for each amp at 14.1v. My drivers window is stuck down 1-1/2in but on the meter and I posted 143.8 @48hz at 13.5v. It was 90 outside and the truck been running awhile. Everybodys scores were down compared to earlier. Wasn't sure what to expect since I've never done it before. But I know there's things like sealing off the bed from the cab I could have got a higher score my window being cracked open a little bit makes a difference my boxer is not design for SPL. Box specs are 7cu @ 33hz. I did it out of curiosity because personally I do not give a crap about what the meter says I do it for me and me alone and what it sounds like.

What about some american bass xfls?

I vote camper top.. Not one of those ones that's just like a roof. One that sits on the back of the truck for actual camping. With bed and stove n shit. Gut that out and load it up.

For the old box you had. You said the motors were right above the port? Like blocking the port? Or just covering the back of the sub? What kind of issues would that cause?

Thanks for clearing that up for me. Was just asking because my box for my zcon is similar to the way you described.

Its a pretty lomg wait time. Well worth it though. As long as your not in desperate need of it asap.

The wait time for me was longer than normal because of the tax season when i ordered. Damn near drove me crazy waiting and i thought aboit cancelling my order several times. I'm really glad i didn't. Hands down the zcon is the best subwoofer I've ever owned. I wouldn't think twice about waiting for one now if i wanted one. Like mentioned above work on your box and your build while you wait. You won't regret it.

I've heard good things about dss as well as bad. The sale he has now on ethos $325 shipped is hard to pass up.. I got 2 12s coming as well should be 2 or 3 weeks.

that is for an aftermarket radio, the stock unit does not have a "park brake wire". The info is fed to the radio via data Yeah i went ahead and decided to try a lockpick.

I've heard good things about dss as well as bad. The sale he has now on ethos $325 shipped is hard to pass up.. I got 2 12s coming as well should be 2 or 3 weeks.What kind of bad things have you heard?Bad glue on spiders.. Someone inverted 15s and cracked the baskets. Other problems from way too much power that is irrelevant. No complaints from rated normal use.. What day did u order?

That is the very reason I seemed to get a bad welcome on my return to SSA,from my opinion Your opinion on dss or just your opinion in general?

I suggest putting pieces of tape over that bright ass blue light and that flashing red light. Just use your 5 senses.. Unless you listen to one song repeatedly then that stupid little light will drive u nuts.Edit.. Except taste.. Unless you get down like that. Lol

Was messing around and made this out of a scrap piece

Just picked up my new emf sub

Yo man you asked if i could make a dss logo like the ssa one. I'm going to stop by my buddies house today and see if i can make one. Im going to use the team dss logo. The one with the subwoofer. I'm pretty sure I'll be able to figure it out but in order for the subwoofer to pop out the piece might have to be painted or stained. Also in that logo the dust cap has dss on it. I don't think the software will be able to recognize that with the size of the piece of wood im using. Once it turns it to G code all i can see is a rough sketch and alot of code so I'll work on it and see how it goes.. Might take me a few tries and a few visits to get it good. Worse case scenario I'll just write it on with a dremel.

Posting this for a friend.. His 2 18 inch recones shipped in a 16 inch box both crammed in with no type of protection other than wrapped in plastic. We know it's just the surround that is bent but those things aren't cheap and they used to be shipped WAY better.

Coca-Cola works just as good. Spray it down with some squirrel piss. Aka wd40 and ur good to go.

Wait another 2 months and pay twice as much. Sound familiar?