ssh

Dc power ftw

Check canadian car audio forum

Clean install, Love it

Do you find your self not feeling motivated to do the other side? Cause that's how I felt Your doors are going to be premo midbass, If I'm ever remotely close to PA, We're listening to some Tool!

There the same drivers. Right...?

Awesome plan, especially the part: once payment is sent, enclosure WILL be shipped within 7 days, timeframes and due dates ftw

I've never played with a Z, it'll depend on power your using, shoot an email to sundown or maybe jacob will reply to this if he sees it.

Its gotta be around 0.2cubes

You don't need another amp, sure it'll get louder, but may not be that much of a difference. I'd go with more cone area, better efficiency with the present power. Then if you decide you want more, get another amp or wall your car or get another car and wall it or 4th order with 20 12s or wire down to 0.25 or turn the gain up more.

What's your current draw from all amplifiers combined?

Every setup I've had has been tuned in the 33-35hz range has been loudest in the 30-4xhz range and starts dropping off near 50hz and above. Sounds pretty normal to me.

Not to rain on anyone's parade but there aren't that many icons sold, much less blown, and even lesser willing to let go for $80.00 Perhaps a blown / used Fi X or used dcon. Check out classifieds section on here and c....a.... Good luck

I haven't measured volume yet. I want .5^ft net. My guess is it is around .75-1^ft as is. The port diameter is 2". My tuning freq will be 65hz. That will give me a port length of 3.54". The only negative with ported midbass is that if a hpf setting at 60hz does not blend well with the sub bass system I am kinda screwed. A longer port length (to lower tuning) willl not be optimal based on my available enclosure pod depth. I forgot since it's midbass that it's tuned much much higher then subs and therefore way less port length At first I was looking and going that port looks big and I don't know how much depth you got. Should work out great though. Are you using the hpf on the amp or headunit? You should be able to play around with the hpf on the amp until it blends well. This is definitely one of those vehicles that I really wish I could bop down the road and get a demo.

Came out great, good work man

Problem with stuff like that is it also attracts rodents, like a light bug zapper. At least in my experience

Pods are coming out great, on an awesome track What's the port length for the pods? Just eye balling it, looks like 0.4-0.6cubes for enclosure volume, and 4"-5" port diameter?

Honestly the only thing that's worked for me: clear away any dead brush near parking area. Spray water under car and under hood every morning and night. Drive the car everyday (getting the engine area hot). And having bright lights near the vehicle. Perhaps some solar walk way lights around the driveway. Having the hood open helps (but makes your vehicle look like a piece of shit, I personally can't do it living in an HOA without getting my ass chewed out) Good luck

Buy a Fi BTL or zcon for that matter. end of story.

Gonna have to give a review of the RA, before and after?

This may help: http://www.dimensionsguide.com/pipe-dimensions/ And black sewer pipe is "ABS".

Turn your ssf up to around 30hz, turn your lpf down to 60-80hz. Lower your gain so your voltage stays in the 13v range at full tilt.

Damn that's sweet, love sleepers. Impressive times, glad you had videos

So go back inside and drink more corona?

From the title I assume he is walling it Yeah pretty much, I get carried away looking at pictures and not reading text. Although it's pretty much walled off

With your enclosure, you mine as well wall it You could make a huge trim piece for it and seal everything behind it My friend rode his skateboard down the street and was like "shit...".