sefugi

You only need half of that!! Give me some! Just kidding, waiting to see the progress!

Out of our hands at the moment. Engine is at the builders, had a loss of oil pressure? Builder os taking care of the problem, but ended up with some damage to the cam. Since the engine is apart and the cam is damaged, Grasshopper decided to go with a roller-cam this time. Probly another week before parts make it in and the engine is reasembled. Might be looking at a Christmas time reinstall of the motor. Grasshopper is chilling on moving to another phase of this project until the motor is completed and he gets a few miles on the motor. Then we can move on to "phase 2" which will be the interior and the sound system. Sorry for the delay on the build because this was not in our plan. Stay tuned we will get this put back together and will be moving forward as soon as possible.

Very Nice!! AA's for the SI!!

Awesome to see you needing to expand!!!! Looking forward to trying out the SA15's I ordered on presale and the SAZ2000's that I've been sitting on for months. Hoping the best for your bussiness in the upcoming year!!

You could give this box calculator a try: My link

Will this line require similar box sizes as the SA's??

Might want to check out the Bravox brand in the SSA store. You will have to run new wiring to the (new) sets of speakers if you are installing an amp. If you are going to run the headunit as power for the new speakers a component set probably won't work to well, but the coaxials might be ok. Good Luck!!

3M Super 77 and the 90 high strength works good for carpet to mdf, can be purchaseed at Lowes and Home Depot.

^^ I agree, nice work!!!

Hahaha, me too! I keep going through ideas, mounting positions, crossover points, etc. in my head wondering what's best. I think what i'll do to calm my spirits and hopefully finish strong in school will be to take pictures and ask the community instead of constantly running ideas through my head when i should be listening to how taking the integral of sinx is going to help me later in life. Some straightforwardness in the front stage will be mid-bass in doors (sealed of course), midrange in kicks/pods, and tweets on A-pillars or I spotted a very nice spot for them and between the dash, A-pillar, and door that may service my hearing much better than if it was on the A-pillars. The A-pillars seem too close at least the left one to my head to put tweets on the pillars. I'll take pics and ask sooner or later (hopefully sooner). A common suggestion I have seen on the forum is to use some double sided tape and try the tweeters in some different positions to get an idea were they will give you the sound you are looking for. Just a thought if you havn't run across this yet. You can do the same with the midranges in the kicks with some preforated metal straps that can be bent and angled for the direction that suits your ears. Good Luck!!

New prank for the guys at work!

Wow things are looking great!!!! Looks like you have a great place to work with lots of room!!!

Awesome looking hardware, should really be a nice sounding setup once you get everything installed!!! Will be looking forward to how you install your front stage!!

I was looking for something similar for the door jams and found these as options. http://www.championmustang.com/door-jamb-rubber-boot-pair-p-9765.html http://www.suicidedoors.com/door-poppers/autoloc-billet-wire-loom/autoloc-billet-wire-loom-doors Just a thought...

The accent leds look great!!! Need some vids!!! Yeah I know I can't talk I havn't put up any either.

AVALANCHE!!!! Sounds good, nice and tidy wiring awaiting the next step!

I would say some metal should be used for access plate, maybe not for the plate itself but somehow for a stronger connection were the plate attatches to the enclosure. I hope your planning to make that top at least a double-baffle!?

In your first post you refered to the most output possible, not the easiest enclosure to build. Do the sealed and try it, then build the ported and get the most output.

32-33 ported and subsonic @ about 28 would be my thoughts

How do they sound?? Make us proud on that wire managment!!

Glad you got us some shots to look at and now your selling it?? Looks good anyways!!

Good Stuff!! What ya got in that tank back there??