Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

edouble101

SSA Regular
  • Joined

  • Last visited

Everything posted by edouble101

  1. I have them on-axis without tweeters, there is no need to have a tweeter with these drivers if mounted on-axis or close to it, on top of the dash/a-pillar.
  2. I have been using the Markaudio Alpair-7-Grey Cone 4" Full Range for over a year now. They are hands down very transparent and extremely capable. Over the years I used and tested +20 full range drivers and these sound the best to my ears. Currently, they are mounted in pods on my dash corners. When the music starts playing they simply disappear. The only driver on your list that is the most comparable is the Tang Band w4-1337sd. Unfortunately, the Tang Band w4-1337sd are HUGE!! Top end "sparkle" is much more present with the Markaudio Alpair-7-Grey Cone 4" Full Range. Other than the Markaudio Alpair-7-Grey Cone 4" Full Range I wold recommend the FaitalPRO 3FE22. The 3FE22 are probably the most underrated midrange IMO. Very neutral sounding like the Markaudio Alpair-7-Grey Cone 4" Full Range and Tang Band w4-1337sd. I recommend the Markaudio Alpair-7-Grey Cone 4" Full Range, runner up the FaitalPRO 3FE22.
  3. No thanks. I am closing this thread. They are being sold on Ebay.
  4. Last attempt to sell these on online forums. $650 shipped for both units.
  5. I ended up selling it before I used it I started this thread too soon.
  6. I am selling my Evil 15" d2. I've decided to build a drag racing car, all my money will be going into that instead of finishing my audio build. I had the sub mounted but it it was never powered. $500 shipped, no trades and I am not lowering the price. 20180127_124334 by edouble.photo, on Flickr 20180127_124445 by edouble.photo, on Flickr 20180127_124451 by edouble.photo, on Flickr 20180127_124352 by edouble.photo, on Flickr
  7. This picture really shows how big this enclosure is!
  8. This amp is going to power my Evil 15
  9. You are using two different tweeters in the same install?
  10. Well then, Dr. Lindsey will be a hit on youtube!
  11. The best part of the video was all the kisses at the end, too cute. Is that always her mo?
  12. Specs indicate that it should be comparable to the Evil.
  13. Looks like a beast. I was expecting the next wattage sub up from the Evil to be a neo sub
  14. Thanks for the review. Are these now your reference subs for sound quality?
  15. I forgot about the Black and Blue sale, thanks. A 40.1 will have to hold me over until SSA releases Evil amps
  16. Are you expecting a sale on Incriminator Audio amps?
  17. I am selling my excellent condition Rockford Fosgate Power amplifiers. The T1500-1bdCP was from Rockford Fosgate, the T600-4 and T600-2 were bought from Crutchfield. T1500-1bdCP - $400 shipped T600-4 - $350 shipped T600-2 - $350 shipped T1500-1bdCP http://www.rockfordfosgate.com/products/details/t1500-1bdcp/ Number of Channels: 1 Rated Power: 1000W x 1 @ 4-Ohms RMS 1500W x 1 @ 2-Ohms RMS 1500W x 1 @ 1-Ohm RMS Total Power: 1500 Watts Dynamic Power: 1320 Watts Bridgeable: No Efficiency (average): 86.2% @ 4-Ohm 74.6% @ 2-Ohm 63.0% @ 1-Ohm Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth Tone Controls: Bass: 0dB to +18dB @ 45Hz Infrasonic Filter: -3dB @ 28Hz 12dB/Octave Signal Input: Low level: 1 RCA pair Signal Output: Low level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional Remote Punch EQ (overrides built-in Punch EQ) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class bd Frequency Response: 20Hz to 250kHz +/- 0.5dB Shipping Weight: 14.35 Lbs. (6.50 Kg.) Dimensions (HxWxL): 2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm) T600-2 http://www.rockfordfosgate.com/products/details/t600-2/ Number of Channels: 2 Rated Power: 200W x 2 @ 4-Ohms RMS 300W x 2 @ 2-Ohms RMS 600W x 1 @ 4-Ohms bridged RMS 1-Ohm x 2 Stable 2-Ohm x 1 bridged Stable Total Power: 600 Watts Dynamic Power: 229 Watts x 2 @ 4-Ohms 0 degrees Res 369 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 71% @ 4-Ohm 68% @ 2-Ohm Crossover Controls: High-Pass (HP): 50-500Hz 24dB/octave Butterworth Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone Controls: Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Signal Input: Low level: 1 RCA pair Signal Output: Low level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional Remote Punch EQ (overrides built-in Punch EQ) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 12.15 Lbs. (5.51 Kg.) Dimensions (HxWxL): 2.14 x 8.14 x 13.66 (in) 5.42 x 20.68 x 34.69 (cm) T600-4 http://www.rockfordfosgate.com/products/details/t600-4/ Number of Channels: 4 Rated Power: 100W x 4 @ 4-Ohms RMS 150W x 4 @ 2-Ohms RMS 300W x 2 @ 4-Ohms bridged RMS 2-Ohms x 2 bridged Stable Total Power: 600 Watts Dynamic Power: Front Channels 139 Watts x 2 @ 4-Ohms 0 degrees Res 236 Watts x 2 @ 2-Ohms 0 degrees Res Rear Channels 140 Watts x 2 @ 4-Ohms 0 degrees Res 236 Watts x 2 @ 2-Ohms 0 degrees Res Bridgeable: Yes Efficiency (average): 70% @ 4-Ohm 64% @ 2-Ohm Crossover Controls: Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone Controls: Front Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Rear Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Signal Input: Front Low level: 1 RCA pair Rear Low level: 1 RCA pair Signal Output: Low Level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional Remote Punch EQ (overrides built-in Punch EQ) Visual Indicators: Power Thermal Protect Circuit Topology Class: Class A/B Frequency Response: 20Hz to 20kHz +/- 1dB Shipping Weight: 12.00 Lbs. (5.44 Kg.) Dimensions (HxWxL): 2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm) [
  18. The evil sub is a bargain to start with. At these black Friday prices they are a steal!
  19. I can’t wait either. I should have my car back from the body shop Nov. 10th and I’ll have this installed shortly after.
  20. Every build is a learning experience!
  21. No problems with me! I am pleased with SSA customer service, thank you for assisting.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.