EPerez

What makes you say that?

Same here lol

I'm 15 mins away from Milford!

If your saying it just didn't play, maybe a wire came loose or something simple. Take the sub out of the box and test with a dmm. If it reads around 4 ohms your good. Axehammer is correct. The back channels are going to be different than the front due to it being a sub.

The sub will determine which ohm the amp will bridge at. There is only one way the amp will be bridged with that sub and it's at 4 ohm. It's pretty much impossible to mess up the wiring for a s4 sub so you should be right. Explain how the sub failed. Did it just stop working when playing it or did it not turn on when you started car? Did it fuck up when a certain song was played? I'm thinking a heavily clipped song was played (probably not knowingly) and messed the sub up. what were your settings on the amp? Like ssf and all that.

You should of asked here first lol So you just had it on one of the channels when it was bridged to 4 ohms?

How did you have the dcon wired up? Just get a recone from ssa and do it your self. There are plenty of vids that walk you through it.

First is the Crescendo C1100.4. It was never actually hooked up, because I didn't have my Crescendo Mezzo components yet. It was only installed in my amp rack to fill the hole for it. Comes with the gain remote. Wire was never unwrapped and remote wasn't taken out of package. Looks flawless. Bought it early Jan. but since since it was on back order, I didnt get it till mid Feb. Will be shipped in orginal box. Asking 360+shipping. I think I can transfer the warranty, but not entirely sure. I'll have to ask. Might be kind of hard to see but it says it was tested on 2/12/13. Next is the ledglow.com complete million color underglow and interior. Here is the link to see: http://www.ledunderbody.com/6pc-million-color-led-ledglow-wireless-underbody-lighting-with-interior-kit.aspx ***I bought 2 of these kits. The one in the pics is the first set I bought. Some of the lights for the underglow are out and this is NOT the kit you will receive. The one you WILL receive is the new one I bought. In the new one I never used the underglow and they are still in the package. The 6 interior ones were installed but are fine. ***I took the 2 15" tubes from the first kit and switched them with the second kit(the one you will get). So it includes the regular 4 underglow but 4 15" and 2 9" interior tubes. 2 of the 15" tubes have been extended to make them longer. I just cut the wire and added speaker wire to them to make them be able to reach my trunk. If bought I will need a day to take them out of the car. 120+shipping. If you want anymore pics of either one let me know and I'll get them to you ASAP. Thanks for looking. I also have the PWX 10s in another f/s thread.

I have a brand new one in the box. Never been hooked up just mounted to fill the hole in the amp rack. Pm me if interested.

Tuned in too see!

Box looks really clean. Zcons get loud as balls!!! I wish I was able to keep both I was going to say the same thing about the port.

Everything's looking clean! Nice install!

This happened to me last year. It was under warranty and I only had to pay shipping lol

This is an old thread lol

I'd build the box closest to the highest optimal that ssa recommends. If I were you I would tune a little higher like around 32hz. The music you listen to really doesn't go all that low. I listen to decaf and I'm tuned to 32hz and it gets it all. I would probably put some bracing in there since it's a really wide box.

Damn that's gonna be insane! 29 hz mmm

Typically you use more power when you have a smaller box and a bigger box when you have a less power. Why can't you use 1200?

Yea I would just go with a saz1500. It's a great amp and sundown has excellent customer service.

Customer service. Read some of the threads in the stetsom sections on here. I think people were saying they were very sensitive to with voltage. Don't quote me on all this, I'm pretty sure that's what i read.

I think they kinda are but can easily break and have shitty cs from what I hear.

Yea no problem

I would only have the double baffle 1.5". Everything else .75".

The length will go in a L shape. You start from the port opening and continue to go all the way until you reach 33". Does that make sense?

The port is 33" long. You know how you see the L shape, that's what it's length is.

Check it again lol I entered it all right now. What do you mean where am I getting it from? I add length until I get the right tuning.