Aaron Clinton

Currently 275/40/17 Toyo R1R. Fat tires are fat. They are meant for track mostly, but can be driven daily and have done me very well. Will be moving to RE-71R's next: http://www.tirerack.com/tires/tires.jsp?tireMake=Bridgestone&tireModel=Potenza+RE-71R Probably move to a 255/40/17 to have less sidewall squish on harsh turns and a slightly smaller OD for better mechanical advantage. These are rated at 200 tread-wear, but are really 80, and that was done for the autocross guys like me wanting more stickies. My R1R's have big time grip, the RE-71R is a serious class above the R1R in terms of grip. So if you want to go more grip aggressive than the P-Zero's, consider the R1R's or even the Dunlap Starspecs.

The Gcon was never really intended for SPL. As long as you have enough box volume and some space in front of the cone, it should perform quite well.

Ok, great to hear.

I really like the 4 channel. Sanken outputs and a very nice crossover network.

Must have been due to his amplifier set up planned. Oh and welcome (denim )

Have you left a message? Josh and Mark are in the office all week and if a voice mail is left, they call back.

Awesome, thank you for grabbing the Gcon. You can do a connector if you can seal it up.

Sorry, I have been leaking little bits here and there. It has been a very long (a year) process to get these off the ground. Because these buggers are NOT a basic overhung 1" or 1.5" coil, it took time to get parts and get the design right. Not to mention some changes at the factory that caused a number of delays. Ok, so these are a copper coil, shorting ring, solid pole, phase plug, underhung design. In final testing, they are a very very clean, warm sound. They were right at home in an IB rig that Neal helped out on big time, so dropping into an average car door is excellent. The Evil6.5's have push terminals that are good for 10 gauge wire. Nomex spiders, so they will able take the same long term abuse that the SSA subs are known for. Also, the glass fiber cones that were available, performed a little better than the poly cones in testing. I will probably be setting these at 120-150rms. Specs are below, on the bottom right. Follow the green slope for the production model. I had put together a slightly different model to see what combination of aspects were the best performing for our goals, so ignore the purple slope and specs on the left.

There is a pole cap, so the Gcon does not need rearward venting.

Well once again, Alton beat me to it and I could not have said it much better.

Anyone else having difficulties?

Mark just did an update, hopefully solving those issues.

Mark just did an update, hopefully that fixed the issues.

Super eleets mids yo!

Que?

Yes, that is Bryan.

Exo always has a contagious excitement for audio. Bryan of Modified runs great channel with some killer video.

Should I leak some production photos of the SSA Evil6.5?

Real time history.

On top of croup (which is slowly going away) and left meniscus is pucking swollen bad; I might have a slightly cracked rib. Needless to say, I couldn't play soccer last night. So I forced to watch my team take a loss to an erratic and disorganized team that is awfully full of themselves. When a top 5 defender in the league is not on the field the entire game, it is a gaping hole. Part of that is my fault, it's my team and I built it very striker and midfielder heavy. I am able to shut down a 1/4 of the field, and have a lot of breaks developing from the back of the defense. But when guys are out of their natural position, the goalie is getting hammered and guys are getting gassed faster.

Let's Go Terps!!!!!!! !