mikey5472

Bullshit chop. lol. You know when I get completely done you'll want to cruise the strip every nite of the week. haha.

I was wanting to order my system next month. But I guess I have to wait til mid 2010. That sucks.

Any updates???

How are you going to use bolts on an enclosure to join the edges?? I know there is a chemical that is used specifically to do these types of things. But I forget what it's called. It basically welds the plexi together. I think that would really be the correct way to do it. Bolts would look ugly anyways. Right, bolts or screws would kinda mess with it. I sent an emai to the people from that link, hopefully they reply soon. Also let me know if you figure out what the chemical is called, I could use that info haha And he means like predrill a hole and instead of a wood screw use a bolt, minus the nut on the other end. I do believe thats what hes saying.. Ok for the bolt, you could do it. This is what you would do. Ok you have the joint (top and side) so to speak, predrill the hole 1 size smaller than the bolt, and either tap the hole with the same size and thread as the bolt or you could tap the hole with the bolt. You will probably still need a adhesive of some type. Actually you will need to use an adhesive. Also might want to use a washer and countersink the hole so that the bolt will be flush with the outer wall. That is NOT how you tap a hole, please learn how to do it before you start giving advice on that. First off figure out what size bolt (technically a screw in this instance) you would like to use, then look at a chart like this one http://www.kramerusa.com/DrillTapChart.htm to find the corresponding drill size for the hole to tap. After that is drilled, use a tap, there are several different styles depending on what you are doing, find whats best for your use. Then tap the hole using the tap, not a bolt, that is asking to break the Plexiglas. I was recommending on using a tap, yes the bolt probably would break it without tapping it. I have had to drill and tap many holes. In cars and dirtbikes all sorts of things, And actually I asked my dad before I siad anything just to make sure I was right.

How are you going to use bolts on an enclosure to join the edges?? I know there is a chemical that is used specifically to do these types of things. But I forget what it's called. It basically welds the plexi together. I think that would really be the correct way to do it. Bolts would look ugly anyways. Right, bolts or screws would kinda mess with it. I sent an emai to the people from that link, hopefully they reply soon. Also let me know if you figure out what the chemical is called, I could use that info haha And he means like predrill a hole and instead of a wood screw use a bolt, minus the nut on the other end. I do believe thats what hes saying.. Ok for the bolt, you could do it. This is what you would do. Ok you have the joint (top and side) so to speak, predrill the hole 1 size smaller than the bolt, and either tap the hole with the same size and thread as the bolt or you could tap the hole with the bolt. You will probably still need a adhesive of some type. Actually you will need to use an adhesive. Also might want to use a washer and countersink the hole so that the bolt will be flush with the outer wall.

You could just put a gasket type deal in between the plexi/lexan. Then pre drill holes and use BOLTS. not screw.

Hell yea we want pics. Why not through a Double cam in there though? Like b16 or 18, maybe even a H22a. but it should still be pretty sick.

I have a huge sheet of 1" thick plexi, that I got FOR FREE. I made a plexi window in a box with it. You could def build a box out of it, but like nmssd12 said be very careful when cutting it, make sure you wear some sort of eye protection. When I first started cutting I didn't think I needed any, but you will def need it.

WTF?!?!?!?!

Did you free hand all that????

Lets see... I traded him a amp, and gave him some wood, some door speakers, traded some wood for some double 0 gauge. .. Um I think thats it. lol... Jk chop its all in the family.

Happy bday samantha!!!! IAK Mikey

I did a 142.9 off a 18" xcon and a 1500d. The box was tuned to 32hz.

I did a 142.9 of an 18" xcon and a 1500d. The box was tuned to 32hz.

I just picked up my 3000d yesterday, I hooked it up to a 12" nightshade and it is amazing. Made it sound 10X cleaner and hit way harder. I plan to get another in the future along with a 50.4. Also I plan to order 2 15" Nightshade in the near future.(next month) I can't wait.

And wood haha. jk chop but no problem.

Haha. I ran to the ups man and took it out of his hands before he had a chance to even say a word. I was opening it before he walked away. He wanted to see wtf it was. lol.

Haha. I feel ya there. My dad still doesn't know I own my Xcon, and I have had it for a while now. He thinks that I am borrowing it from a friend. O but yea they are massive, I remember when I got mine, I was so stoked to get it in and hear it. They are awesome. I need to send mine in.

91 is an ef and si wheels are beautiful. My rims are ls mesh rims off a integra painted. I plan on a b18c1 swap later when money is right as for now it sits with a d16y7 with a vtec head lightened flywheel stage two racing clutch full 2 1/2 exhaust and a p28 computer... Anywho as of now the peak fs is 28 hrz and its doing a 140.1 at it sealed up. This is off around 700 watts so its not bad in my op digs down so low and stays flat My buddy just bought a 95 prelude. I think it has the H22a. (Jdawg22) He wants to do a lot with it, but he doesn't have the money right now. He needs a lot of body work done to it, well not a lot more cosmetic than anything, and paint. He just bought some 18" motegi's that look real nice on it. About 2 years ago I almost bought a 89 supra. I wanted it real bad, and had the money for it ($1200), but I was afraid of the turbo going out and other little shit.

Welcome. I think you will like SSA much more than ca as we seem to be much more knowledgeable.

Well I think we are still in the process of redesigning the logo. Not sure. I know I drew a couple things and sander had some shit, so I am not sure what we are doing with it.

One is dead and is waiting on doctors to fix him, but more importantly he is waiting on me to send him to the hospital. lol.

Mhm!!

Welcome Sam. Glad to see you here.

Should have my saz 3000d as early as next tuesday and as late as next friday.