Kanaworm$

POWER : 1970 Watts AMP VOLTAGE (measured) : 49.25 V AMP CURRENT (calculated) : 40 A ACTUAL IMPEDANCE (calculated) : 1.23 ohms SUPPLY VOLTAGE : 12.85 V bump the voltage up a little an this beast could 800 over the rated 1500 I'm sure.... improbable but not impossible... Sundown rates their amplifiers at 12.8 volts, not 14.4 volts like Rockford. Fosgate gives a THD rating with their ratings Sundown does not. This game can go on forever. Both are nice amps. Period. . dot Actually Sundown does give a THD rating with there amp ratings. From the Sundown Website -<LI>Tested Voltage & THD : 14.4V & Less than 1% THD

Just force it in there!

Save yourself some money and contact Don at http://www.sounddeadenershowdown.com/cgi-bin/index.cgi and let him know what your trying to acheive. He will sell you exactly what you need. Definitely complete the "Big 3" and when it comes to bass in the trunk, it's going to take testing to find out what sounds best to your ears.

Nice looking enclosure! I hate when the hole is to small ....

Only time it matters is when it's at 10% and by then the woofer is cooked!

Box looks good!

Very nice update! Glad to hear your healthy and on the way to recovery! Keep up the great work!

Seriously?

From the amp to the door speakers direct. Through the boot. You can use the fatory wiring behind the dash, just make sure you have the right polarity.

Dual 1 ohm voice coils? What other options did you select with your BTL? Question is why would you buy something when you obviously have no idea what you are doing? + HiFonics 2400 watt amp + Fi BTL = Fail!

My personal preference has always been 35-38hz. I listen to mainly metal, rock and very little rap/hip hop. Pasrts Express has the Precision Ports (Aeros)

Very nice work!

Looks like some very good wire! Nice qc as the wire in the jacket looks consistent all around.

What amp? I personally like to run my own wire from the doors to the amp. No need to run on a specific side of the vehicle. I would use 16 gauge.

With Aero ports you can use roughly 50% less port area than a standard slot port. As far any audible SQ or SPL increases/decreases, I don't think you will be able to notice unless you meter it. I just built a box for my IA DR 18" using 4 4" Aeros and I like the result so far. A tuning of 30hz will give you a flatter response with a nice gradual roll off at tuning. Tuning higher will give you louder bump and sharper roll off at tuning.

That is great, I have never heard of that procedure before!

You may want want to cut down on the screws! Buy a quality wood glue, clamps and you will not need so many screws. Box build looks great though!

The Incriminator Flatlyne would be another choice.

Kinda threw me with the title!

Should rename the SA-8 "Beast"!